Detalles del producto

Cell chemistry SuperCap Number of series cells 2-4 Cells, >4 Cells Communication interface I2C, SMBus Battery capacity (min) (mAh) 0 Battery capacity (max) (mAh) 65534 Implementation Pack External capacity indication None Operating temperature range (°C) -40 to 85 Cell balancing External Rating Catalog
Cell chemistry SuperCap Number of series cells 2-4 Cells, >4 Cells Communication interface I2C, SMBus Battery capacity (min) (mAh) 0 Battery capacity (max) (mAh) 65534 Implementation Pack External capacity indication None Operating temperature range (°C) -40 to 85 Cell balancing External Rating Catalog
TSSOP (PW) 24 49.92 mm² (7.8 mm × 6.4 mm)
  • Fully integrated 2-, 3-, 4-, and 5-series Super Capacitor Manager
  • Can be used with up to 9-series capacitors without individual integrated capacitor monitoring and balancing
  • Active capacitor voltage balancing
    • Prevents super capacitor overvoltage during charging
  • Capacitor health monitoring
    • Capacitance learning
    • ESR measurement
    • Operation status
    • State-of-charge
    • State-of-health
    • Charging voltage and current reports
    • Safety alerts with optional pin indication
  • Integrated protection monitoring and control
    • Overvoltage
    • Short circuit
    • Excessive temperature
    • Excessive capacitor leakage
  • 2-wire SMBus serial communications
  • High-accuracy 16-bit delta-sigma ADC with a 16-channel multiplexer for measurement
    • Used for voltage, current, and temperature
  • Low power consumption
    • < 660 µA in NORMAL operating mode
    • < 1 µA in SHUTDOWN mode
  • Wide operating temperature: –40°C to +85°C
  • Fully integrated 2-, 3-, 4-, and 5-series Super Capacitor Manager
  • Can be used with up to 9-series capacitors without individual integrated capacitor monitoring and balancing
  • Active capacitor voltage balancing
    • Prevents super capacitor overvoltage during charging
  • Capacitor health monitoring
    • Capacitance learning
    • ESR measurement
    • Operation status
    • State-of-charge
    • State-of-health
    • Charging voltage and current reports
    • Safety alerts with optional pin indication
  • Integrated protection monitoring and control
    • Overvoltage
    • Short circuit
    • Excessive temperature
    • Excessive capacitor leakage
  • 2-wire SMBus serial communications
  • High-accuracy 16-bit delta-sigma ADC with a 16-channel multiplexer for measurement
    • Used for voltage, current, and temperature
  • Low power consumption
    • < 660 µA in NORMAL operating mode
    • < 1 µA in SHUTDOWN mode
  • Wide operating temperature: –40°C to +85°C

The Texas Instruments BQ33100 Super Capacitor Manager is a fully integrated, single-chip solution that provides a rich array of features for charge control, monitoring, and protection for either 2-, 3-, 4-, or 5-series super capacitors with individual capacitor monitoring and balancing or up to 9-series capacitors with only the stack voltage being measured. With a small footprint of 7.8 mm × 6.4 mm in a compact 24-pin TSSOP package, the BQ33100 maximizes functionality and safety while dramatically increasing ease of use and cutting the solution cost and size for super capacitor applications.

Using its integrated high-performance analog peripherals, the BQ33100 battery manager measures and maintains an accurate record of available capacitance, state-of-health, voltage, current, temperature, and other critical parameters in super capacitors, and reports the information to the system host controller over a 2-wire SMBus 1.1 compatible interface.

The BQ33100 provides firmware-controlled protection on overvoltage, overtemperature, and overcharge, along with hardware-controlled protection for overcurrent in discharge and short circuit protection during charge and discharge.

The Texas Instruments BQ33100 Super Capacitor Manager is a fully integrated, single-chip solution that provides a rich array of features for charge control, monitoring, and protection for either 2-, 3-, 4-, or 5-series super capacitors with individual capacitor monitoring and balancing or up to 9-series capacitors with only the stack voltage being measured. With a small footprint of 7.8 mm × 6.4 mm in a compact 24-pin TSSOP package, the BQ33100 maximizes functionality and safety while dramatically increasing ease of use and cutting the solution cost and size for super capacitor applications.

Using its integrated high-performance analog peripherals, the BQ33100 battery manager measures and maintains an accurate record of available capacitance, state-of-health, voltage, current, temperature, and other critical parameters in super capacitors, and reports the information to the system host controller over a 2-wire SMBus 1.1 compatible interface.

The BQ33100 provides firmware-controlled protection on overvoltage, overtemperature, and overcharge, along with hardware-controlled protection for overcurrent in discharge and short circuit protection during charge and discharge.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos BQ33100 Super Capacitor Manager datasheet (Rev. C) PDF | HTML 20/11/2019
Nota sobre la aplicación Design Example Charge 3 Super Capacitors in Series with Health Monitoring PDF | HTML 8/04/2020
Nota sobre la aplicación bq33100 Top Thirteen Design Considerations 8/07/2015
Nota sobre la aplicación Calibration and Data Flash Programming the bq33100 Supercapacitor Manager 27/04/2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ33100EVM-001 — Módulo de evaluación para administrador de supercondensador bq33100 totalmente integrado, chip único

The BQ33100EVM-001 evaluation module (EVM) is a complete evaluation system for the bq33100 super capacitor manager. The EVM includes one bq33100 circuit module. An EV2400 PC interface board for gas gauge interface and a PC USB cable are required for communication with a PC and can be ordered (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Firmware

SLUC250 — BQ33100 Firmware

Productos y hardware compatibles
Soporte de software

SLUC249 — BQ33100 Evaluation Software

Productos y hardware compatibles
Diseño de referencia

TIDA-00258 — Diseño de referencia del Supercondensador Manager

The Supercapacitor Manager is a fully integrated, single-chip, solution that provides a rich array of features for managing, charge control, monitoring, and protection, for either 2, 3, 4 or 5 series Supercapacitors with individual capacitor monitoring and balancing or up to 9 series capacitors (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 24 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos