Detalles del producto

Protocols 6LoWPAN, Amazon Sidewalk, MIOTY, Proprietary, Proprietary 15.4, TI 15.4, Wi-SUN, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, OOK, OQPSK Frequency bands 1173-1440, 118-144, 157-192, 196-240, 235-288, 294-360, 391-480, 469-576, 587-720, 782-960, 938-1152 Type Transceiver TX power (max) (dBm) 22 Sensitivity (best) (dBm) -122 RX current (lowest) (mA) 6.9 Data rate (max) (Mbps) 1.5 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled No
Protocols 6LoWPAN, Amazon Sidewalk, MIOTY, Proprietary, Proprietary 15.4, TI 15.4, Wi-SUN, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, OOK, OQPSK Frequency bands 1173-1440, 118-144, 157-192, 196-240, 235-288, 294-360, 391-480, 469-576, 587-720, 782-960, 938-1152 Type Transceiver TX power (max) (dBm) 22 Sensitivity (best) (dBm) -122 RX current (lowest) (mA) 6.9 Data rate (max) (Mbps) 1.5 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled No
VQFN (RKP) 40 25 mm² (5 mm × 5 mm)
  • High-performance, software-configurable transceiver with support for IEEE 802.15.4
  • Wide RF frequency coverage from 118MHz to 1435MHz
  • Supported modulation formats:
    • SUN FSK, SUN O-QPSK, 2-(G)FSK, 4-(G) FSK, MSK, O-QPSK, and OOK
  • High linearity PA:
    • Up to +22dBm output power with FSK and O-QPSK
  • High efficiency PA:
    • +16dBm output power in differential mode
    • +14dBm output power in single-ended mode
    • Supports FSK, O-QPSK, and OOK
  • Receiver sensitivity (w/uLNA enabled):
    • -131dBm at 0.75kbps O-QPSK 12ksps
    • -122dBm at 6.25kbps SUN O-QPSK RM0
    • -107dBm at 100kbps SUN FSK #2b, no FEC
  • Current consumption:
    • 6.9mA RX in SUN FSK, SUN O-QPSK
    • TX (high linearity PA): 134mA at +22dBm
    • TX (high efficiency PA): 33mA at +16dBm
  • Separate modems and dual IFfilters: O-QPSK, and FSK
  • Dual modems enable dual receive capabilities
  • Software configurable modem and in-field upgradable radio transceiver through a secure serial bootloader (SSBL)
  • Includes IEEE and TI proprietary unique IDs
  • Factory-calibrated TX power and RSSI measurement
  • Sniff mode and dual sync word capabilities
  • WaveMatch for improved sync detect performance
  • Device configuration and information
  • Action commands and status commands and data transfer commands
  • Packet streaming and repeat RX/TX supported with stream store and flush commands
  • 5mm × 5mm RKP VQFN
  • 1 × SPI, 8 × GPIO, RF front-end control, AES 128-bit hardware accelerator
  • Voltage range: 1.71V to 3.8V
  • Built-in DC/DC converter
  • ETSI EN 300 220 receiver category 1, 1.5 and 2
  • EN 303 131, EN 303 204
  • FCC CFR47 part 15
  • ARIB STD-T108
  • Wi-SUN, IEEE 802.15.4, Wireless M-bus, OMS v5.0.1 (TX burst mode), IPv6-enabled smart objects (6LoWPAN), RF proprietary systems, SimpleLink™ TI 15.4-stack
  • CC1404P BoosterPack™ development kit
  • SimpleLink™ CC140x software host driver plug-in
  • SmartRF™ Studio 8 for simple radio configuration
  • High-performance, software-configurable transceiver with support for IEEE 802.15.4
  • Wide RF frequency coverage from 118MHz to 1435MHz
  • Supported modulation formats:
    • SUN FSK, SUN O-QPSK, 2-(G)FSK, 4-(G) FSK, MSK, O-QPSK, and OOK
  • High linearity PA:
    • Up to +22dBm output power with FSK and O-QPSK
  • High efficiency PA:
    • +16dBm output power in differential mode
    • +14dBm output power in single-ended mode
    • Supports FSK, O-QPSK, and OOK
  • Receiver sensitivity (w/uLNA enabled):
    • -131dBm at 0.75kbps O-QPSK 12ksps
    • -122dBm at 6.25kbps SUN O-QPSK RM0
    • -107dBm at 100kbps SUN FSK #2b, no FEC
  • Current consumption:
    • 6.9mA RX in SUN FSK, SUN O-QPSK
    • TX (high linearity PA): 134mA at +22dBm
    • TX (high efficiency PA): 33mA at +16dBm
  • Separate modems and dual IFfilters: O-QPSK, and FSK
  • Dual modems enable dual receive capabilities
  • Software configurable modem and in-field upgradable radio transceiver through a secure serial bootloader (SSBL)
  • Includes IEEE and TI proprietary unique IDs
  • Factory-calibrated TX power and RSSI measurement
  • Sniff mode and dual sync word capabilities
  • WaveMatch for improved sync detect performance
  • Device configuration and information
  • Action commands and status commands and data transfer commands
  • Packet streaming and repeat RX/TX supported with stream store and flush commands
  • 5mm × 5mm RKP VQFN
  • 1 × SPI, 8 × GPIO, RF front-end control, AES 128-bit hardware accelerator
  • Voltage range: 1.71V to 3.8V
  • Built-in DC/DC converter
  • ETSI EN 300 220 receiver category 1, 1.5 and 2
  • EN 303 131, EN 303 204
  • FCC CFR47 part 15
  • ARIB STD-T108
  • Wi-SUN, IEEE 802.15.4, Wireless M-bus, OMS v5.0.1 (TX burst mode), IPv6-enabled smart objects (6LoWPAN), RF proprietary systems, SimpleLink™ TI 15.4-stack
  • CC1404P BoosterPack™ development kit
  • SimpleLink™ CC140x software host driver plug-in
  • SmartRF™ Studio 8 for simple radio configuration

The SimpleLink™ CC1404P is a high-performance Sub-1GHz wireless transceiver supporting SUN FSK and SUN O-QPSK based on IEEE 802.15.4 as well as a wide variety of proprietary physical layers. The flexible software-defined radio architecture enables easy integration into legacy wireless systems. CC1404P is targeting Wi-SUN, 6LoWPAN and proprietary systems. The highlighted features of this device include:

  • Flexible Sub-1GHz radio supporting wide RF frequency coverage
  • Supports a variety of protocol stacks in the SimpleLink™ software development kit (SDK), including Wi-SUN®, SimpleLink™ 15.4-stack, and proprietary solutions
  • Maximum transmit power of +22dBm for constant envelope signals like FSK and O-QPSK.
  • Low power solution enabling battery-operated devices
  • Dedicated software-defined radio controller providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards

  • Flexible GPIO manager enabling support for control of external Front-End Modules (FEMs)

TI offers drivers within the SimpleLink™ SDK plugin, including a driver for firmware updates. This enables a faster path from design to production. For more information on TI’s Sub-1GHz solutions, visit www.ti.com/connectivity.

The SimpleLink™ CC1404P is a high-performance Sub-1GHz wireless transceiver supporting SUN FSK and SUN O-QPSK based on IEEE 802.15.4 as well as a wide variety of proprietary physical layers. The flexible software-defined radio architecture enables easy integration into legacy wireless systems. CC1404P is targeting Wi-SUN, 6LoWPAN and proprietary systems. The highlighted features of this device include:

  • Flexible Sub-1GHz radio supporting wide RF frequency coverage
  • Supports a variety of protocol stacks in the SimpleLink™ software development kit (SDK), including Wi-SUN®, SimpleLink™ 15.4-stack, and proprietary solutions
  • Maximum transmit power of +22dBm for constant envelope signals like FSK and O-QPSK.
  • Low power solution enabling battery-operated devices
  • Dedicated software-defined radio controller providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards

  • Flexible GPIO manager enabling support for control of external Front-End Modules (FEMs)

TI offers drivers within the SimpleLink™ SDK plugin, including a driver for firmware updates. This enables a faster path from design to production. For more information on TI’s Sub-1GHz solutions, visit www.ti.com/connectivity.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos CC1404P SimpleLink™ High-Performance Sub-1GHz O-QPSK and FSK Transciever datasheet PDF | HTML 17/09/2026
Nota sobre la aplicación How to Modify TX and RX Commands Imported/Exported from SysConfig or SmartRF™ Studio PDF | HTML 30/04/2026
Nota sobre la aplicación Antenna Impedance Measurement and Matching PDF | HTML 22/03/2022
Nota sobre la aplicación DN035 -- Antenna Quick Guide (Rev. B) 9/02/2022
Nota sobre la aplicación Debugging Communication Range (Rev. A) PDF | HTML 23/05/2019
Nota sobre la aplicación RF PCB Simulation Cookbook 9/01/2019
Nota sobre la aplicación CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) PDF | HTML 2/10/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LP-CC2652R7 — Kit de desarrollo LaunchPad™ CC2652R7 para MCU inalámbrico SimpleLink™ Multi-Standard

Este kit de desarrollo LaunchPad™ se utiliza para acelerar el desarrollo con el MCU inalámbrico SimpleLink™ Multi-Standard CC2652R7 con soporte para Bluetooth®, Zigbee® y Thread.  El kit de desarrollo de software SIMPLELINK-LOWPOWER-SDK proporciona soporte de software.

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Kit de desarrollo

LP-XDS110 — Depurador del kit de desarrollo LaunchPad™ XDS110

El depurador del kit de desarrollo LaunchPad LP-XDS110 es una herramienta para programar y depurar microcontroladores, microprocesadores y dispositivos DSP compatibles con XDS de Texas Instruments (TI). El LP-XDS110 está diseñado para conectarse directamente a Launchpads divididos a través del (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Kit de desarrollo de software (SDK)

CC140XP-DESIGN — Design resources for CC1407P family of devices

This folder contains early access design resources for CC140xP family of devices.
Productos y hardware compatibles
Enchufe

SIMPLELINK-TRX-PLUGIN — Transceiver Plug-in for SimpleLink™ SDK

Los SDK de baja potencia de SimpleLink™ son compatibles con las familias de productos CC13xx, CC23xx, CC26xx y CC27xx. Juntos, estos SDK proporcionan paquetes de programas completos para el desarrollo de aplicaciones Sub-1 GHz y 2.4 GHz que incluyen compatibilidad con Bluetooth® de baja energía, (...)

Productos y hardware compatibles
Soporte de software

SMARTRF-STUDIO-8 — Software de aplicación SmartRF Studio 8 para dispositivos CC23xx y CC27xx

SmartRF™ Studio es una aplicación para Windows que ayuda a los diseñadores de sistemas de RF a evaluar fácilmente la radio en una etapa temprana del proceso de diseño para todos los dispositivos de RF de baja potencia CC1xxx y CC2xxx de TI. Simplifica la generación de los valores y comandos del (...)

Productos y hardware compatibles
Herramienta de diseño

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Revisiones de diseño de hardware para dispositivos SimpleLink™ CC1xxx

Para comenzar con el proceso de revisión del diseño de hardware de SimpleLink™ inferior a 1 GHz:

  • Paso 1: Antes de solicitar una revisión, es importante que revise la documentación técnica y los recursos de diseño y desarrollo disponibles en la página del producto correspondiente (consulte los (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RKP) 40 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos