Inicio Productos DLP Controladores y conductores de DLP
Inicio
Productos DLP
Controladores y conductores de DLP

DLPA4000

ACTIVO

Controlador PMIC/LED DLP®; para DMD

Haga su pedido ahora
Hoja de datos

DLPA4000

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Component type PMIC/LED Driver Operating temperature range (°C) 0 to 70 Rating Catalog
Component type PMIC/LED Driver Operating temperature range (°C) 0 to 70 Rating Catalog
HTQFP (PFD) 100 256 mm² 16 x 16
  • High-Efficiency, High-Current RGB LED Driver with High-Side Pump Functionality
  • Drivers for External Buck FETs up to 32 A
  • Drivers for External RGB Switches
  • 10-Bit Programmable Current per Channel
  • Inputs for Selecting Color-Sequential RGB LEDs
  • Generation of DMD High Voltage Supplies
  • Two High Efficiency Buck Converters to Generate the DLPC4422 controller and DMD Supply
  • A High Efficiency, 8-Bit Programmable Buck Converter (PWR6) for FAN Driver Application or General Purpose
  • Two LDOs Supplying Auxiliary Voltages
  • Analog MUX for Measuring Internal and External Nodes
  • Protections: Thermal Shutdown, Hot Die, Low Battery, and Undervoltage Lockout (UVLO)
  • High-Efficiency, High-Current RGB LED Driver with High-Side Pump Functionality
  • Drivers for External Buck FETs up to 32 A
  • Drivers for External RGB Switches
  • 10-Bit Programmable Current per Channel
  • Inputs for Selecting Color-Sequential RGB LEDs
  • Generation of DMD High Voltage Supplies
  • Two High Efficiency Buck Converters to Generate the DLPC4422 controller and DMD Supply
  • A High Efficiency, 8-Bit Programmable Buck Converter (PWR6) for FAN Driver Application or General Purpose
  • Two LDOs Supplying Auxiliary Voltages
  • Analog MUX for Measuring Internal and External Nodes
  • Protections: Thermal Shutdown, Hot Die, Low Battery, and Undervoltage Lockout (UVLO)

The DLPA4000 device is a highly-integrated power management driver. It is optimized for DLP® LED projector systems. The DLPA4000 supports projectors up to 32 A per LED with high-side pump functionality. An integrated, high-efficiency buck controller energizes the device. The drivers control switches support the sequencing of R, G, and B LEDs. The device contains five buck converters, two of which are dedicated for the DLPC4422 controller low-voltage supply. Another dedicated regulated supply energizes the DLPA200 DMD micromirror driver and the three timing critical DC supplies for the DMD: VBIAS, VRST, and VOFS.

The DLPA4000 device contains several auxiliary blocks. These blocks allow flexibility in LED projector system design. An 8-bit programmable buck converter can drive an RGB projector fan or make an auxiliary supply line. Two LDOs can generate a lower-current supply, up to 200 mA. These LDOs are specified to operate at 2.5 V and 3.3 V.

The serial protocol interface (SPI) addresses all blocks of the DLPA4000 device. These addressable features include: the generation of the system reset, power sequencing, input signals for sequentially selecting the active LED, IC self-protections, and an analog MUX for routing analog information to an external ADC.

The DLPA4000 device is a highly-integrated power management driver. It is optimized for DLP® LED projector systems. The DLPA4000 supports projectors up to 32 A per LED with high-side pump functionality. An integrated, high-efficiency buck controller energizes the device. The drivers control switches support the sequencing of R, G, and B LEDs. The device contains five buck converters, two of which are dedicated for the DLPC4422 controller low-voltage supply. Another dedicated regulated supply energizes the DLPA200 DMD micromirror driver and the three timing critical DC supplies for the DMD: VBIAS, VRST, and VOFS.

The DLPA4000 device contains several auxiliary blocks. These blocks allow flexibility in LED projector system design. An 8-bit programmable buck converter can drive an RGB projector fan or make an auxiliary supply line. Two LDOs can generate a lower-current supply, up to 200 mA. These LDOs are specified to operate at 2.5 V and 3.3 V.

The serial protocol interface (SPI) addresses all blocks of the DLPA4000 device. These addressable features include: the generation of the system reset, power sequencing, input signals for sequentially selecting the active LED, IC self-protections, and an analog MUX for routing analog information to an external ADC.

filter Buscar otro/a Controladores y conductores de DLP
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet DLPA4000 PMIC and High-Current LED Driver datasheet PDF | HTML 21 mar 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de cálculo

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Herramienta de diseño

DLP-OMM-SEARCH — Herramientas de búsqueda de productos de terceros DLP®

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
View Options
Herramienta de diseño

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTQFP (PFD) 100 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos