DRV8161

ACTIVO

Controlador de compuerta inteligente de medio puente con un máximo de 105 V y amplificador de deriva

Detalles del producto

Rating Catalog Architecture Gate driver Vs (min) (V) 8 Vs ABS (max) (V) 115 Features 1x low side current sense Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety Quality-Managed
Rating Catalog Architecture Gate driver Vs (min) (V) 8 Vs ABS (max) (V) 115 Features 1x low side current sense Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety Quality-Managed
VSSOP (DGS) 20 24.99 mm² (5.1 mm × 4.9 mm)
  • Drives two N-channel MOSFETs in half-bridge configuration
    • High-side MOSFET source/drain up to 102V (absolute max)
    • 8V (5V DRV8162L) to 20V gate drive power supply
    • Integrated bootstrap diode
  • Functional Safety Quality-Managed
    • Documentation available to aid functional safety system design
  • Supports 100% PWM duty cycle with an integrated trickle charge pump
  • 16-level gate drive peak current
    • 16mA - 1000mA source current
    • 32mA - 2000mA sink current
    • Source-sink current ratio 1:1, 1:2, 1:3
  • Adjustable PWM dead time insertion 20ns - 900ns
  • Robust design for motor phase (SH) switching
    • Slew rate 50V/ns
    • Negative transient voltage -20V
    • 2A strong gate pull down
  • Split gate drive supply inputs for redundant shutdown (DRV8162, DRV8162L)
  • Low-offset current sense amplifier (DRV8161)
    • Adjustable gain (5, 10, 20, 40V/V)
  • Flexible PWM control interface; 2-pin PWM, 1-pin PWM, and independent PWM mode
  • 13-level VDS over current threshold
  • Independent shutdown pin (nDRVOFF)
  • Gate driver soft shutdown sequence
  • Integrated protection features
    • GVDD under voltage (GVDDUV)
    • Bootstrap under voltage (BST_UV)
    • MOSFET over current protection (VDS)
    • Shoot through protection
    • Thermal shutdown (OTSD)
    • Fault condition indicator (nFAULT)
  • Supports 3.3V, and 5V Logic Inputs
  • Drives two N-channel MOSFETs in half-bridge configuration
    • High-side MOSFET source/drain up to 102V (absolute max)
    • 8V (5V DRV8162L) to 20V gate drive power supply
    • Integrated bootstrap diode
  • Functional Safety Quality-Managed
    • Documentation available to aid functional safety system design
  • Supports 100% PWM duty cycle with an integrated trickle charge pump
  • 16-level gate drive peak current
    • 16mA - 1000mA source current
    • 32mA - 2000mA sink current
    • Source-sink current ratio 1:1, 1:2, 1:3
  • Adjustable PWM dead time insertion 20ns - 900ns
  • Robust design for motor phase (SH) switching
    • Slew rate 50V/ns
    • Negative transient voltage -20V
    • 2A strong gate pull down
  • Split gate drive supply inputs for redundant shutdown (DRV8162, DRV8162L)
  • Low-offset current sense amplifier (DRV8161)
    • Adjustable gain (5, 10, 20, 40V/V)
  • Flexible PWM control interface; 2-pin PWM, 1-pin PWM, and independent PWM mode
  • 13-level VDS over current threshold
  • Independent shutdown pin (nDRVOFF)
  • Gate driver soft shutdown sequence
  • Integrated protection features
    • GVDD under voltage (GVDDUV)
    • Bootstrap under voltage (BST_UV)
    • MOSFET over current protection (VDS)
    • Shoot through protection
    • Thermal shutdown (OTSD)
    • Fault condition indicator (nFAULT)
  • Supports 3.3V, and 5V Logic Inputs

The DRV816x devices are half-bridge gate drivers capable of driving high-side and low-side N-channel MOSFETs. The gate drive voltages are generated from the GVDD supply pin and the integrated bootstrap circuit is used to drive the high-side FET up to 102V drain. The Smart Gate Drive architecture supports 16-level (48 combination) gate drive peak current up to 1A source and 2A sink, and a built-in timing control of gate drive current. The devices can be used to drive various types of loads including brushless/brushed DC motors, PMSM, stepper motors, SRM, and solenoids.

Internal protection functions are provided for supply undervoltage, FET over-current, and die over temperature. The nFAULT pin indicates fault events detected by the protection features. The nDRVOFF pin initiates power stage shutdown independent from PWM control. The DRV8162 and DRV8162L devices offer split power supply architecture to assist safe torque off (STO) function.

Many device parameters including gate drive current, dead time, PWM control interface, and over current detection are configurable with a few passive components connected to device pins. An integrated low-side current sense amplifier (DRV8161) provides current measurement information back to the controller.

The DRV816x devices are half-bridge gate drivers capable of driving high-side and low-side N-channel MOSFETs. The gate drive voltages are generated from the GVDD supply pin and the integrated bootstrap circuit is used to drive the high-side FET up to 102V drain. The Smart Gate Drive architecture supports 16-level (48 combination) gate drive peak current up to 1A source and 2A sink, and a built-in timing control of gate drive current. The devices can be used to drive various types of loads including brushless/brushed DC motors, PMSM, stepper motors, SRM, and solenoids.

Internal protection functions are provided for supply undervoltage, FET over-current, and die over temperature. The nFAULT pin indicates fault events detected by the protection features. The nDRVOFF pin initiates power stage shutdown independent from PWM control. The DRV8162 and DRV8162L devices offer split power supply architecture to assist safe torque off (STO) function.

Many device parameters including gate drive current, dead time, PWM control interface, and over current detection are configurable with a few passive components connected to device pins. An integrated low-side current sense amplifier (DRV8161) provides current measurement information back to the controller.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DRV816x 100V Half-Bridge Smart Gate Driver with Integrated Protection and Current Sense Amplifier datasheet (Rev. C) PDF | HTML 18/02/2025
Application brief Understanding Gate Driver Slew Rate Control, MOSFET Switching Optimization and Protection Features (Rev. A) PDF | HTML 11/12/2025
Nota sobre la aplicación Relating Payload to Brushless DC Motor Driver Specifications PDF | HTML 2/12/2024
Nota sobre la aplicación Three-Phase vs Three-Single Half-Bridge Gate Drivers PDF | HTML 24/11/2024
Artículo técnico Cobots to humanoids: Driving system efficiency and safety into higher-power robots PDF | HTML 22/11/2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8161EVM — Módulo de evaluación DRV8161

El módulo de evaluación (EVM) DRV8161 es una etapa de accionamiento de corriente continua (CC) sin escobillas trifásica de 30 A basada en el controlador de puerta DRV8161 para motores de corriente continua sin escobillas (BLDC). El EVM permite evaluar rápidamente el dispositivo DRV8161, que hace (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VSSOP (DGS) 20 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos