Inicio Audio, háptica y piezoeléctrica Amplificadores de audio Amplificadores de audio de uso general
Inicio
Audio, háptica y piezoeléctrica
Amplificadores de audio
Amplificadores de audio de uso general

LM48512

ACTIVO

Amplificador de audio mono de Clase D, entrada analógica y 2.7 W con convertidor de refuerzo integra

Haga su pedido ahora
Hoja de datos

LM48512

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Control interface GPIO Output power (W) 2.7 Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.3 THD + N at 1 kHz (%) 0.03 Load (min) (Ω) 4 Analog supply voltage (min) (V) 2.3 Analog supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Control interface GPIO Output power (W) 2.7 Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.3 THD + N at 1 kHz (%) 0.03 Load (min) (Ω) 4 Analog supply voltage (min) (V) 2.3 Analog supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YZR) 16 5.0625 mm² 2.25 x 2.25

  • E 2 S System Reduces EMI while Preserving Audio Quality and Efficiency
  • Integrated Boost Converter
  • Supply Voltage Level Detection on Boost Converter
  • Low Power Shutdown Mode
  • "Click and Pop" suppression
    •

  • E 2 S System Reduces EMI while Preserving Audio Quality and Efficiency
  • Integrated Boost Converter
  • Supply Voltage Level Detection on Boost Converter
  • Low Power Shutdown Mode
  • "Click and Pop" suppression
    •

    Part of National’s PowerWise family or products, the LM48512 delivers 1.8W into 8Ω, while consuming 14.5mA of quiescent current. The LM48512 also features National’s Enhanced Emissions Suppression (E 2S) system, a patented, ultra low EMI PWM architecture that significantly reduces RF emissions while preserving audio quality and efficiency. LM48512 improves battery life, reduces external component count, board area consumption, system cost, and simplifies design.

    The LM48512 is designed to meet the demands of portable multimedia devices. The LM48512 features high efficiency compared to other boosted amplifiers and low EMI Class D amplifiers. The LM48512 is capable of driving an 8Ω speaker to 5.5V levels (1.8W) from a 3.6V supply while operating at 82% efficiency. Flexible power supply requirements allow operation from 2.3V to 5.5V. The E 2S system features a patented edge rate control (ERC) architecture that further reduces emissions by minimizing the high frequency component of the device output, while maintaining high quality audio reproduction (THD+N = 0.03%) and high efficiency. A low power shutdown mode reduces supply current consumption to 0.04μA.

    The LM48512 features a battery-saving automatic gain control (AGC). The AGC detects the battery voltage and reduces the gain of the amplifier to limit the output as the battery voltage decreases.

    Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown.

    Key Specifications

    ■  Power Output at VDD = 3.6V   RL = 8Ω, THD+N ≤ 1% 1.8W (typ)
    ■   Efficiency at 3.6V, 800mW into 8Ω 82% (typ)
    ■  Quiescent Power Supply Current   at 3.6V 14.5mA
    ■  Shutdown current 0.04μA (typ)

    Part of National’s PowerWise family or products, the LM48512 delivers 1.8W into 8Ω, while consuming 14.5mA of quiescent current. The LM48512 also features National’s Enhanced Emissions Suppression (E 2S) system, a patented, ultra low EMI PWM architecture that significantly reduces RF emissions while preserving audio quality and efficiency. LM48512 improves battery life, reduces external component count, board area consumption, system cost, and simplifies design.

    The LM48512 is designed to meet the demands of portable multimedia devices. The LM48512 features high efficiency compared to other boosted amplifiers and low EMI Class D amplifiers. The LM48512 is capable of driving an 8Ω speaker to 5.5V levels (1.8W) from a 3.6V supply while operating at 82% efficiency. Flexible power supply requirements allow operation from 2.3V to 5.5V. The E 2S system features a patented edge rate control (ERC) architecture that further reduces emissions by minimizing the high frequency component of the device output, while maintaining high quality audio reproduction (THD+N = 0.03%) and high efficiency. A low power shutdown mode reduces supply current consumption to 0.04μA.

    The LM48512 features a battery-saving automatic gain control (AGC). The AGC detects the battery voltage and reduces the gain of the amplifier to limit the output as the battery voltage decreases.

    Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown.

    Key Specifications

    ■  Power Output at VDD = 3.6V   RL = 8Ω, THD+N ≤ 1% 1.8W (typ)
    ■   Efficiency at 3.6V, 800mW into 8Ω 82% (typ)
    ■  Quiescent Power Supply Current   at 3.6V 14.5mA
    ■  Shutdown current 0.04μA (typ)

    filter Buscar otro/a Amplificadores de audio de uso general
    Descargar Ver vídeo con transcripción Video

    Documentación técnica

    star =Principal documentación para este producto seleccionada por TI
    No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
    Ver todo 4
    Tipo Título Fecha
    * Data sheet PowerWise Boosted, Ultra Lo-EMI, Mono, E2S Class D Audio Pwr Amp datasheet (Rev. A) 09 abr 2012
    Application note Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 26 ago 2019
    Application note AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 27 jun 2019
    Application note AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 01 may 2013

    Diseño y desarrollo

    Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

    Herramienta de simulación

    PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

    PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
    Solicitar
    Encapsulado Pines Símbolos CAD, huellas y modelos 3D
    DSBGA (YZR) 16 Ultra Librarian
    Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

    Pedidos y calidad

    Información incluida:
    • RoHS
    • REACH
    • Marcado del dispositivo
    • Acabado de plomo/material de la bola
    • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
    • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
    • Contenido del material
    • Resumen de calificaciones
    • Monitoreo continuo de confiabilidad
    Información incluida:
    • Lugar de fabricación
    • Lugar de ensamblaje

    Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

    Soporte y capacitación

    Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

    Ver todos los temas del foro en inglés

    El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

    Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

    Videos