Inicio Audio, háptica y piezoeléctrica Amplificadores de audio Amplificadores de audio de uso general
Inicio
Audio, háptica y piezoeléctrica
Amplificadores de audio
Amplificadores de audio de uso general

LM4992

ACTIVO

Amplificador de audio estéreo de Clase AB, entrada analógica y 1.07 W

Haga su pedido ahora
Hoja de datos

LM4992

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Stereo Control interface Hardware Output power (W) 1.2 THD + N at 1 kHz (%) 0.15 Load (min) (Ω) 8 Analog supply voltage (min) (V) 2.2 Analog supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Stereo Control interface Hardware Output power (W) 1.2 THD + N at 1 kHz (%) 0.15 Load (min) (Ω) 8 Analog supply voltage (min) (V) 2.2 Analog supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 85
WSON (NHK) 14 12 mm² (4 mm × 3 mm)
  • Available in Space-Saving WSON Package
  • Ultra Low Current Shutdown Mode
  • BTL Output Can Drive Capacitive Loads
  • Improved Click and Pop Circuitry Eliminates Noise During Turn-On and Turn-Off Transitions
  • 2.2 - 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Unity-Gain Stable
  • External Gain Configuration Capability

Key Specifications

  •  Improved PSRR at 217Hz & 1KHz: 64 dB (1KHz)
  •  Stereo Output Power at 5.0V, 1% THD, 8Ω: 1.07 W (typ)
  •  Stereo Output Power at 3.3V, 1% THD, 8Ω: 420 mW (typ)
  •  Shutdown Current, Vdd = 3.3V: 0.2 µA (typ)

All trademarks are the property of their respective owners.

  • Available in Space-Saving WSON Package
  • Ultra Low Current Shutdown Mode
  • BTL Output Can Drive Capacitive Loads
  • Improved Click and Pop Circuitry Eliminates Noise During Turn-On and Turn-Off Transitions
  • 2.2 - 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Unity-Gain Stable
  • External Gain Configuration Capability

Key Specifications

  •  Improved PSRR at 217Hz & 1KHz: 64 dB (1KHz)
  •  Stereo Output Power at 5.0V, 1% THD, 8Ω: 1.07 W (typ)
  •  Stereo Output Power at 3.3V, 1% THD, 8Ω: 420 mW (typ)
  •  Shutdown Current, Vdd = 3.3V: 0.2 µA (typ)

All trademarks are the property of their respective owners.

The LM4992 is a stereo audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt, per channel, of continuous average power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4992 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM4992 features independent shutdown control for each channel and a low-power consumption shutdown mode, which is achieved by driving both shutdown pins with logic low. Additionally, the LM4992 features an internal thermal shutdown protection mechanism.

The LM4992 contains advanced click and pop circuitry which eliminates noise which would otherwise occur during turn-on and turn-off transitions.

The LM4992 is unity-gain stable and can be configured by external gain-setting resistors.

The LM4992 is a stereo audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt, per channel, of continuous average power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4992 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM4992 features independent shutdown control for each channel and a low-power consumption shutdown mode, which is achieved by driving both shutdown pins with logic low. Additionally, the LM4992 features an internal thermal shutdown protection mechanism.

The LM4992 contains advanced click and pop circuitry which eliminates noise which would otherwise occur during turn-on and turn-off transitions.

The LM4992 is unity-gain stable and can be configured by external gain-setting resistors.

filter Buscar otro/a Amplificadores de audio de uso general
Descargar

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM4992  420mW Stereo Cell Phone Audio Amplifier datasheet (Rev. B) 2/05/2013

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​