Detalles del producto

Frequency (min) (MHz) 50 Frequency (max) (MHz) 2000 Type RMS Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 3.3 Supply current (µA) 9800 Number of channels 2 Dynamic range (typ) (dB) 24 Operating temperature range (°C) -40 to 85 Rating Catalog
Frequency (min) (MHz) 50 Frequency (max) (MHz) 2000 Type RMS Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 3.3 Supply current (µA) 9800 Number of channels 2 Dynamic range (typ) (dB) 24 Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YZR) 8 3.0625 mm² 1.75 x 1.75
  • >20 dB Square-Law Detection Range
  • 2 Sequentially Selectable RF Inputs
  • Low Power Consumption Shutdown Mode
  • Externally Configurable Gain and LF Filter Bandwidth.
  • Internal 50Ω RF Termination Impedance
  • Optimized for Use with 20 dB Directional Coupler
  • Lead Free 8-Bump DSBGA Package 1.5 x 1.5 x 0.6 mm

  • >20 dB Square-Law Detection Range
  • 2 Sequentially Selectable RF Inputs
  • Low Power Consumption Shutdown Mode
  • Externally Configurable Gain and LF Filter Bandwidth.
  • Internal 50Ω RF Termination Impedance
  • Optimized for Use with 20 dB Directional Coupler
  • Lead Free 8-Bump DSBGA Package 1.5 x 1.5 x 0.6 mm

The LMV232 dual RF detector is designed for RF transmit power measurement in mobile phones. This dual mean square IC is especially suited for accurate power measurement of RF signals exhibiting high peak-to-average ratios used in 3G and UMTS/CDMA applications. The LMV232 saves calibration steps and system certification and is highly accurate. The circuit operates with a single supply from 2.5 to 3.3V.

The LMV232 contains a mean square detector with two sequentially selectable RF inputs. The RF input power range of the device has been optimized for use with a 20 dB directional coupler, without the need for additional external components. A single external RC combination between FB and OUT provides an externally configurable gain and LF filter bandwidth of the device.

The device has two digital interfaces. A shutdown function is available to set the device in a low-power shutdown mode. In case SD = HIGH, the device is in shutdown, if SD = LOW the device is active. The Band-Select function controls the selection of the active RF input channel. In case BS = HIGH, RFIN1 is active. In case BS = LOW, RFIN2 is active.

The dual mean square detector is offered in an 8-bump DSBGA 1.5 x 1.5 x 0.6 mm package. This DSBGA package has the smallest footprint and height.

The LMV232 dual RF detector is designed for RF transmit power measurement in mobile phones. This dual mean square IC is especially suited for accurate power measurement of RF signals exhibiting high peak-to-average ratios used in 3G and UMTS/CDMA applications. The LMV232 saves calibration steps and system certification and is highly accurate. The circuit operates with a single supply from 2.5 to 3.3V.

The LMV232 contains a mean square detector with two sequentially selectable RF inputs. The RF input power range of the device has been optimized for use with a 20 dB directional coupler, without the need for additional external components. A single external RC combination between FB and OUT provides an externally configurable gain and LF filter bandwidth of the device.

The device has two digital interfaces. A shutdown function is available to set the device in a low-power shutdown mode. In case SD = HIGH, the device is in shutdown, if SD = LOW the device is active. The Band-Select function controls the selection of the active RF input channel. In case BS = HIGH, RFIN1 is active. In case BS = LOW, RFIN2 is active.

The dual mean square detector is offered in an 8-bump DSBGA 1.5 x 1.5 x 0.6 mm package. This DSBGA package has the smallest footprint and height.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet LMV232 Dual-Channel Integrated Mean Square Power Detector for CDMA & WCDMA datasheet (Rev. C) 27 mar 2013
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Application note AN-1434 Crest Factor Invariant RF Power Detector (Rev. A) 30 abr 2013
User guide AN-1806 LMV232 Evaluation Board (Rev. A) 30 abr 2013
Application note Base Station Closed-Loop RF Pwr Cntrl w/LMV232 Crest-Factor Invariant Detector (Rev. A) 30 abr 2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Paquete Pasadores Descargar
DSBGA (YZR) 8 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos