LMX2594

ACTIVO

Sintetizador RF PLLatinum™, banda ancha de 15 GHz, sincronización de fase y compatible con JESD204B

Detalles del producto

Frequency (max) (MHz) 15000 Frequency (min) (MHz) 10 Normalized PLL phase noise (dBc/Hz) -236 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -129 Features Flexible ramp generation, Integer-boundary spurs (IBS) removal, Integrated VCO, JESD204B SYSREF, Multi-device sync, Phase adjustment, Wideband Current consumption (mA) 340 Integrated VCO Yes Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) Loop BW dependent
Frequency (max) (MHz) 15000 Frequency (min) (MHz) 10 Normalized PLL phase noise (dBc/Hz) -236 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -129 Features Flexible ramp generation, Integer-boundary spurs (IBS) removal, Integrated VCO, JESD204B SYSREF, Multi-device sync, Phase adjustment, Wideband Current consumption (mA) 340 Integrated VCO Yes Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) Loop BW dependent
VQFN (RHA) 40 36 mm² 6 x 6
  • 10-MHz to 15-GHz output frequency
  • –110 dBc/Hz phase noise at 100-kHz offset with 15-GHz carrier
  • 45-fs rms jitter at 7.5 GHz (100 Hz to 100 MHz)
  • Programmable output power
  • PLL key specifications
    • Figure of merit: –236 dBc/Hz
    • Normalized 1/f noise: –129 dBc/Hz
    • High phase detector frequency
      • 400-MHz integer mode
      • 300-MHz fractional mode
    • 32-bit fractional-N divider
  • Remove integer boundary spurs with programmable input multiplier
  • Synchronization of output phase across multiple devices
  • Support for SYSREF with 9-ps resolution programmable delay
  • Frequency ramp and chirp generation ability for FMCW applications
  • < 20-µs VCO calibration speed
  • 3.3-V single power supply operation
  • 10-MHz to 15-GHz output frequency
  • –110 dBc/Hz phase noise at 100-kHz offset with 15-GHz carrier
  • 45-fs rms jitter at 7.5 GHz (100 Hz to 100 MHz)
  • Programmable output power
  • PLL key specifications
    • Figure of merit: –236 dBc/Hz
    • Normalized 1/f noise: –129 dBc/Hz
    • High phase detector frequency
      • 400-MHz integer mode
      • 300-MHz fractional mode
    • 32-bit fractional-N divider
  • Remove integer boundary spurs with programmable input multiplier
  • Synchronization of output phase across multiple devices
  • Support for SYSREF with 9-ps resolution programmable delay
  • Frequency ramp and chirp generation ability for FMCW applications
  • < 20-µs VCO calibration speed
  • 3.3-V single power supply operation

The LMX2594 is a high-performance, wideband synthesizer that can generate any frequency from 10 MHz to 15 GHz without using an internal doubler, thus eliminating the need for sub-harmonic filters. The high-performance PLL with figure of merit of –236 dBc/Hz and high-phase detector frequency can attain very low in-band noise and integrated jitter. The high-speed N-divider has no pre-divider, thus significantly reducing the amplitude and number of spurs. There is also a programmable input multiplier to mitigate integer boundary spurs.

The LMX2594 allows users to synchronize the output of multiple devices and also enables applications that need deterministic delay between input and output. A frequency ramp generator can synthesize up to two segments of ramp in an automatic ramp generation option or a manual option for maximum flexibility. The fast calibration algorithm allows changing frequencies faster than 20 µs. The LMX2594 adds support for generating or repeating SYSREF (compliant to JESD204B standard) designed for low-noise clock sources in high-speed data converters. A fine delay adjustment (9-ps resolution) is provided in this configuration to account for delay differences of board traces.

The output drivers within LMX2594 deliver output power as high as 7 dBm at 15-GHz carrier frequency. The device runs from a single 3.3-V supply and has integrated LDOs that eliminate the need for on-board low noise LDOs.

The LMX2594 is a high-performance, wideband synthesizer that can generate any frequency from 10 MHz to 15 GHz without using an internal doubler, thus eliminating the need for sub-harmonic filters. The high-performance PLL with figure of merit of –236 dBc/Hz and high-phase detector frequency can attain very low in-band noise and integrated jitter. The high-speed N-divider has no pre-divider, thus significantly reducing the amplitude and number of spurs. There is also a programmable input multiplier to mitigate integer boundary spurs.

The LMX2594 allows users to synchronize the output of multiple devices and also enables applications that need deterministic delay between input and output. A frequency ramp generator can synthesize up to two segments of ramp in an automatic ramp generation option or a manual option for maximum flexibility. The fast calibration algorithm allows changing frequencies faster than 20 µs. The LMX2594 adds support for generating or repeating SYSREF (compliant to JESD204B standard) designed for low-noise clock sources in high-speed data converters. A fine delay adjustment (9-ps resolution) is provided in this configuration to account for delay differences of board traces.

The output drivers within LMX2594 deliver output power as high as 7 dBm at 15-GHz carrier frequency. The device runs from a single 3.3-V supply and has integrated LDOs that eliminate the need for on-board low noise LDOs.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LMX2694-EP ACTIVO Sintetizador de RF de 15 GHz de producto mejorado con sincronización de fase Extended temperature operation
LMX2820 ACTIVO Sintetizador RF de banda ancha de 22,6 GHz con sincronización de fase, JESD y calibración de frecuen Higher frequency operation and additional features
Funcionalidad similar a la del dispositivo comparado
LMX1204 ACTIVO Búfer, multiplicador y divisor de RF de 12.8 GHz compatible con SYSREF JESD204B/C y sincronización d Up to 12.8-GHz clock buffer, multiplier and divider and five-channel JESD support

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 15
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet LMX2594 15-GHz Wideband PLLATINUM™ RF Synthesizer With Phase Synchronization and JESD204B Support datasheet (Rev. C) PDF | HTML 17 abr 2019
Application note VCO Design Basic and Key Parameter for GSM Application PDF | HTML 23 ene 2026
Application note Practical Clocking Considerations That Give Your Next High-Speed Converter Design an Edge (Rev. A) PDF | HTML 11 abr 2025
Application brief Compilation of RF Synthesizer Resources PDF | HTML 22 oct 2024
Application note Sine to Square Wave Conversion Using Clock Buffers PDF | HTML 03 sep 2024
Circuit design MASH_SEED Optimization and Impact on Spurs (LMX2820) PDF | HTML 08 ago 2024
Application brief Using the MSP430FR5969 EVM to Program the LMX2594 PLL Synthesizer PDF | HTML 26 abr 2024
Application brief LMX2820 with Internal Doubler versus LMX2594 PDF | HTML 16 ene 2024
Application note Streamline RF Synthesizer VCO Calibration and Optimize PLL Lock Time (Rev. A) 27 ago 2021
Application note Impact of PLL Jitter to GSPS ADC's SNR and Performance Optimization 11 nov 2020
Application note Powering Sensitive Noise ADC Designs with the TPS62913 Low-Noise Buck Converter PDF | HTML 30 sep 2020
Technical article Step-by-step considerations for designing wide-bandwidth multichannel systems PDF | HTML 04 jun 2019
Technical article Preparing for 5G applications: sync your multichannel JESD204B data acquisition sy PDF | HTML 28 ago 2017
Technical article How to implement FM modulation PDF | HTML 03 ago 2017
Technical article High-speed data converter clocking for JESD204B PDF | HTML 07 jul 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ADC08DJ5200RFEVM — Módulo de evaluación de ADC08DJ5200RF para ADC de 8 bits de muestreo de RF con 5,2 GSPS dobles o 10,

El módulo de evaluación (EVM) ADC08DJ5200RF es una plataforma para evaluar el ADC08DJ5200RF. ADC08DJ5200RF es un convertidor analógico a digital (ADC) de baja potencia, 8 bits, de doble canal de 5,2 GSPS o de un solo canal de 10,4 GSPS, con muestreo de RF con una entrada analógica en búfer y un (...)

Guía del usuario: PDF | HTML
Placa de evaluación

ADC12DJ4000RFEVM — Módulo de evaluación de ADC12DJ4000RF para ADC de 12 bits con muestreo de RF, 4 GSPS dobles u 8 GSPS

El módulo de evaluación (EVM) ADC12DJ4000RF está diseñado para evaluar la familia ADC12DJ4000RF de convertidores analógico a digital (ADC) de alta velocidad. El EVM está equipado con el ADC12DJ4000RF, un ADC de 12 bits doble canal de 4 GSPS o canal único de 8 GSPS con interfaz JESD204B.
Guía del usuario: PDF | HTML
Placa de evaluación

LMX2594EVM — Sintetizador RF LMX2594EVM de banda ancha de 15 GHz con sincronización de fase y módulo de evaluació

El módulo de evaluación (EVM) LMX2594EVM es una plataforma para desarrollar el LMX2594. El LMX2594 es el primer PLL con un oscilador controlado por tensión (VCO) integrado de la industria que obtiene una salida fundamental de VCO de hasta 15 GHz. La figura de mérito (FoM) PLL líder en la industria (...)

Guía del usuario: PDF | HTML
Placa de evaluación

LMX2594PSEVM — Módulo de evaluación LMX2594 para sintetizador de RF de 15 GHz con sincronización de fase de varios

El módulo de evaluación (EVM) LMX2594 es una plataforma para evaluar la función de sincronización de fase (PS) del sintetizador de RF de banda ancha LMX2594. El LMX2594PSEVM contiene dos piezas LMX2594 que comparten el mismo reloj de referencia.

Después de la sincronización de fase, se puede medir (...)

Guía del usuario: PDF | HTML
Placa de evaluación

XMICR-3P-LMX2594 — Módulos de evaluación LMX2594 de X-MWblock

X-MWblocks consist of RF and Microwave “Drop-In” components that can be used individually for prototyping or in production assemblies. X-MWblocks are easy to test, integrate, align, and configure to 60 GHz and beyond. No messy Sweat Soldering or Silver Epoxy processes are required. X-MWblocks are (...)

Desde: X-Microwave
Soporte de software

TICSPRO-SW TICS Pro GUI and Live Programming Tool for Clocking Devices

Texas Instruments clocks and synthesizers (TICS) pro software is used to program the evaluation modules (EVMs) for product numbers with these prefixes: CDC, LMK and LMX. These products include phase-locked loops and voltage-controlled oscillators (PLL+VCO), synthesizers and clocking devices.

Productos y hardware compatibles

Productos y hardware compatibles

Opciones de descarga
Modelo de simulación

LMX2594 IBIS Model

SNAM206.ZIP (44 KB) - IBIS Model
Símbolo CAD/CAE

LMX25xx Reference Pro Altium Database

SNAR037.ZIP (899 KB)
Símbolo CAD/CAE

LMX2594EVM Altium Database

SNAR038.ZIP (3058 KB)
Herramienta de diseño

CLOCK-TREE-ARCHITECT — Software de programación de diseño de árbol de reloj

La herramienta de síntesis de tipo árbol de reloj “arquitecto de tipo árbol de reloj” agiliza el proceso de diseño al generar soluciones de árbol de reloj en función de los requisitos del sistema. La herramienta extrae datos de una amplia base de datos de productos de relojes para generar una (...)
Herramienta de diseño

PLLATINUMSIM-SW PLL loop filter, phase noise, lock time, and spur simulation tool

PLLATINUMSIM-SW is a simulation tool that allows users to create detailed designs and simulations of our PLLatinum™ integrated circuits, which include the LMX series of phase-locked loops (PLLs) and synthesizers.

Productos y hardware compatibles

Productos y hardware compatibles

Opciones de descarga
Archivo Gerber

LMX2594EVM Gerber Files

SNAC084.ZIP (3967 KB)

Muchos diseños de referencia de TI incluyen LMX2594

Utilice nuestra herramienta de selección de diseños de referencia para revisar e identificar los diseños que mejor se adaptan a su aplicación y parámetros.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHA) 40 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos