Inicio Controladores para motores Drivers para motores de CC sin escobillas (BLDC) Controladores BLDC de control integrado
Inicio
Controladores para motores
Drivers para motores de CC sin escobillas (BLDC)
Controladores BLDC de control integrado
NUEVO

MC121-Q1

PRESENTACIÓN PRELIMINAR

Controlador de motor BLDC monofásico de 40 V y máxima de 1 A con sensor Hall integrado para automoci

Haga su pedido ahora
Hoja de datos

MC121-Q1

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Architecture Integrated FET Vs (min) (V) 3.3 Vs ABS (max) (V) 40 Operating temperature range (°C) -40 to 125
Rating Automotive Architecture Integrated FET Vs (min) (V) 3.3 Vs ABS (max) (V) 40 Operating temperature range (°C) -40 to 125
X2SON (DEZ) 6 5 mm² (2.5 mm × 2 mm) SOT-23-THN (DYM) 6 11.02 mm² (2.9 mm × 3.8 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • N-channel H-bridge driver with internal Hall sensor
  • RDS(ON): 850mΩ (HS+LS)
  • Current rating
    • Configurable current limit up to 1.21A
    • 0.5A rms (TA = 105oC, RθJA = 100oC/W)
  • Integrated supply (VM) clamp
  • Configurable speed curve and starting duty cycle
  • Commutation schemes: square or soft (up to 90o)
    • Square: maximum torque/speed
    • Soft: optimized speed and acoustics
  • Configurable speed reference input: PWM or DC
    • Input PWM frequency range: 20 Hz to 90 kHz
    • Input DC voltage range: (0-3)V
  • Configurable output PWM frequency: 25 or 50kHz
  • Closed loop speed control accuracy: ±3%
  • PWM dithering to reduce EMI
  • Configurable soft start time
  • Configurable hall offset angle and time
  • Speed output with 0.5x, 1x, 2/3x, or 2x multipliers
  • Rotor lock detection output (RD)
  • Configurable PWM modes
    • Synchronous, asynchronous and hybrid
  • Auto-demag for high efficiency across speed
  • One-time programming (2 pages) over I2C
  • Protection features
    • Overcurrent protection for short between VM/GND and OUTx
    • Locked rotor protection (LRP) with auto-restart
    • VM undervoltage lockout (UVLO)
    • VM overvoltage protection (OVP)
    • Thermal shutdown (TSD)
    • Configurable fault retry time
  • Functional features (Opeartion continues)
    • when short between FG/RD and GND
    • 100% input during short between PWM/DC and VM
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • N-channel H-bridge driver with internal Hall sensor
  • RDS(ON): 850mΩ (HS+LS)
  • Current rating
    • Configurable current limit up to 1.21A
    • 0.5A rms (TA = 105oC, RθJA = 100oC/W)
  • Integrated supply (VM) clamp
  • Configurable speed curve and starting duty cycle
  • Commutation schemes: square or soft (up to 90o)
    • Square: maximum torque/speed
    • Soft: optimized speed and acoustics
  • Configurable speed reference input: PWM or DC
    • Input PWM frequency range: 20 Hz to 90 kHz
    • Input DC voltage range: (0-3)V
  • Configurable output PWM frequency: 25 or 50kHz
  • Closed loop speed control accuracy: ±3%
  • PWM dithering to reduce EMI
  • Configurable soft start time
  • Configurable hall offset angle and time
  • Speed output with 0.5x, 1x, 2/3x, or 2x multipliers
  • Rotor lock detection output (RD)
  • Configurable PWM modes
    • Synchronous, asynchronous and hybrid
  • Auto-demag for high efficiency across speed
  • One-time programming (2 pages) over I2C
  • Protection features
    • Overcurrent protection for short between VM/GND and OUTx
    • Locked rotor protection (LRP) with auto-restart
    • VM undervoltage lockout (UVLO)
    • VM overvoltage protection (OVP)
    • Thermal shutdown (TSD)
    • Configurable fault retry time
  • Functional features (Opeartion continues)
    • when short between FG/RD and GND
    • 100% input during short between PWM/DC and VM

The MC121-Q1 is a 40V, 850mΩ rated motor driver with integrated N-channel full-bridge, charge pump, Hall sensor, commutation control logic, and protection circuitry for single phase brushless DC motors. The Hall sensor provides rotor position information to the commutation logic to maintain continuous rotor motion. The commutation logic can be programmed for square and soft PWM waveforms to reduce acoustic noise or maximize speed/efficiency.

The duty cycle of a pulse-width modulated signal or a (0-3)V DC voltage on the PWM/DC pin controls the motor speed. FG/RD pin can be configured to report the motor speed or a locked rotor condition to an external controller. The PWM/DC and FG/RD pins can be temporarily configured as an I2C interface to support a programming (OTP) mode to configure the OTP during production.

The MC121-Q1 integrates protection features for motor and device protection. These include supply undervoltage lockout, overvoltage protection, output overcurrent protection, device overtemperature shutdown, and locked rotor protection.

The MC121-Q1 is available in two 6-pin packages: SOT23-FL and X2SON. SOT23-FL is a flat lead package with a maximum height of 1.1mm. X2SON is a non-leaded package with a max. height of 0.4mm.

The MC121-Q1 is a 40V, 850mΩ rated motor driver with integrated N-channel full-bridge, charge pump, Hall sensor, commutation control logic, and protection circuitry for single phase brushless DC motors. The Hall sensor provides rotor position information to the commutation logic to maintain continuous rotor motion. The commutation logic can be programmed for square and soft PWM waveforms to reduce acoustic noise or maximize speed/efficiency.

The duty cycle of a pulse-width modulated signal or a (0-3)V DC voltage on the PWM/DC pin controls the motor speed. FG/RD pin can be configured to report the motor speed or a locked rotor condition to an external controller. The PWM/DC and FG/RD pins can be temporarily configured as an I2C interface to support a programming (OTP) mode to configure the OTP during production.

The MC121-Q1 integrates protection features for motor and device protection. These include supply undervoltage lockout, overvoltage protection, output overcurrent protection, device overtemperature shutdown, and locked rotor protection.

The MC121-Q1 is available in two 6-pin packages: SOT23-FL and X2SON. SOT23-FL is a flat lead package with a maximum height of 1.1mm. X2SON is a non-leaded package with a max. height of 0.4mm.
filter Buscar otro/a Controladores BLDC de control integrado
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos MC121-Q1 Automotive 40V , Single Phase BLDC Driver with Integrated Hall Sensor datasheet PDF | HTML 20/11/2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

MC121EVM — Módulo de evaluación MC121

El MC121EVM les permite a los usuarios evaluar el rendimiento del controlador BLDC monofásico de MC121 y MC121-Q1. El EVM incluye un chip de FTDI en placa para convertir la comunicación USB, desde la PC, en un transmisor/receptor asíncrono universal (UART). El microcontrolador (MCU) MSP430FR2355 (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
GUI para el módulo de evaluación (EVM)

MOTORSTUDIO-1PHASE-GUI — GUI for Single phase BLDC driver

Productos y hardware compatibles
GUI para el módulo de evaluación (EVM)

MOTORSTUDIO-GUI — Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio es una interfaz gráfica de usuario (GUI) fácil de usar que simplifica el proceso de ajuste de nuestros controladores de motor CC sin escobillas (BLDC) para reducir el tiempo de evaluación de dispositivos y desarrollo de productos. La GUI permite a los usuarios accionar rápidamente sus (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
X2SON (DEZ) 6 Ultra Librarian
SOT-23-THN (DYM) 6 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos