Inicio Audio, háptica y piezoeléctrica Amplificadores de audio Amplificadores de audio de uso general
Inicio
Audio, háptica y piezoeléctrica
Amplificadores de audio
Amplificadores de audio de uso general

TAS5615

ACTIVO

Amplificador estéreo con entrada analógica de 160 W estéreo (300 W en total), de clase D, con retroa

Haga su pedido ahora
Hoja de datos

TAS5615

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Load (min) (Ω) 8 Rating Catalog Operating temperature range (°C) 0 to 70
Load (min) (Ω) 8 Rating Catalog Operating temperature range (°C) 0 to 70
HSSOP (DKD) 44 225.78 mm² 15.9 x 14.2 HTQFP (PHD) 64 256 mm² 16 x 16
  • Active Enabled Integrated Feedback Provides: (PurePath™ HD Technology)
    • Signal Bandwidth up to 80 kHz for High-Frequency Content From
      High-Definition Sources
    • Ultralow 0.03% THD at 1 W into 8
    • 0.03% THD Across All Frequencies for Natural Sound at 1 W
    • 80-dB PSRR (BTL, No Input Signal)
    • >100-dB (A weighted) SNR
    • Click- and Pop-Free Start-Up
    • Minimal External Components Compared to Discrete Solutions
  • Multiple Configurations Possible on the Same PCB:
    • Mono Parallel Bridge-Tied Load (PBTL)
    • 2.1 Single-Ended (SE) Stereo Pair and Bridge-Tied Load (BTL) Subwoofer
    • Quad Single-Ended (SE) Outputs
  • Total Output Power at 10% THD+N
    • 300 W in Mono PBTL Configuration
    • 160 W per Channel in Stereo BTL
    • 80 W per Channel in Quad Single-Ended
  • High Efficiency Power Stage (> 90%) With 120 m Output MOSFETs
  • Two Thermally Enhanced Package Options:
    • PHD (64-Pin QFP)
    • DKD (44-Pin PSOP3)
  • Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and
    Short-Circuit Protection) With Error Reporting
  • EMI Compliant When Used With Recommended System Design
  • APPLICATIONS
    • Mini Combo System
    • AV Receivers
    • DVD Receivers
    • Active Speakers

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
  • Active Enabled Integrated Feedback Provides: (PurePath™ HD Technology)
    • Signal Bandwidth up to 80 kHz for High-Frequency Content From
      High-Definition Sources
    • Ultralow 0.03% THD at 1 W into 8
    • 0.03% THD Across All Frequencies for Natural Sound at 1 W
    • 80-dB PSRR (BTL, No Input Signal)
    • >100-dB (A weighted) SNR
    • Click- and Pop-Free Start-Up
    • Minimal External Components Compared to Discrete Solutions
  • Multiple Configurations Possible on the Same PCB:
    • Mono Parallel Bridge-Tied Load (PBTL)
    • 2.1 Single-Ended (SE) Stereo Pair and Bridge-Tied Load (BTL) Subwoofer
    • Quad Single-Ended (SE) Outputs
  • Total Output Power at 10% THD+N
    • 300 W in Mono PBTL Configuration
    • 160 W per Channel in Stereo BTL
    • 80 W per Channel in Quad Single-Ended
  • High Efficiency Power Stage (> 90%) With 120 m Output MOSFETs
  • Two Thermally Enhanced Package Options:
    • PHD (64-Pin QFP)
    • DKD (44-Pin PSOP3)
  • Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and
    Short-Circuit Protection) With Error Reporting
  • EMI Compliant When Used With Recommended System Design
  • APPLICATIONS
    • Mini Combo System
    • AV Receivers
    • DVD Receivers
    • Active Speakers

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath™ HD technology). It has the ability to drive up to 160 W(1) stereo into 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.

The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.

The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath™ HD technology). It has the ability to drive up to 160 W(1) stereo into 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.

The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.
filter Buscar otro/a Amplificadores de audio de uso general
Descargar

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPA3221 ACTIVO Amplificador de audio estéreo de 100 W y mono de 200 W, Clase D, entrada analógica y alimentación de Lower minimum load and lower noise
Funcionalidad similar a la del dispositivo comparado
TPA3223 ACTIVO Amplificador de audio estéreo de 200 W, mono de 400 W, alimentación de 10 a 45 V, entrada analógica Higher output power

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet 160W Stereo / 300W Mono PurePath(TM) HD Analog Input Power Stage datasheet (Rev. B) 18 feb 2010

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​