TAS5706A

Name: TAS5706A
Brand: TI
SKU: TAS5706A
Price: 8.322 USD

ACTIVO

Amplificador de potencia de audio I2S de circuito cerrado estéreo de 20 W con EQ de altavoz y DRC

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 20W stereo Digital Audio Power Amplifier With EQ and DRC. datasheet (Rev. D) (Inglés)

TAS5706A

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Audio input type

Digital Input

Speaker channels (max)

Stereo

Control interface

Hardware, Software

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

4

Analog supply voltage (min) (V)

3

Analog supply voltage (max) (V)

3.6

Rating

Catalog

Operating temperature range (°C)

0 to 85

Audio input type

Digital Input

Speaker channels (max)

Stereo

Control interface

Hardware, Software

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

4

Analog supply voltage (min) (V)

3

Analog supply voltage (max) (V)

3.6

Rating

Catalog

Operating temperature range (°C)

0 to 85

HTQFP (PAP)

64

144 mm² 12 x 12

Audio Input/Output
- 20-W into an 8- Load From an 18-V Supply
- Two Serial Audio Inputs (Four Audio Channels)
TAS5706A Supports:
- 2-Ch Bridged Outputs (20 W × 2)
TAS5706B Supports:
- 2-Ch Bridged Outputs (20 W × 2)
- 4-Ch Single-Ended Outputs (10 W × 4)
- 2-Ch Single-Ended + 1-Ch Bridged (2.1 Mode) (10 W × 2 + 20 W)
Supports 32-kHz-192-kHz Sample Rates (LJ/RJ/I²S)
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- Higher Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
- Constant Output Power Over Variation in Supply
Wide PVCC Range From (10 V to 26 V)
- No Separate Supply Required for Gate Drive
Headphone PWM Outputs
Subwoofer PWM Outputs
AM Interference Avoidance Support
Audio/PWM Processing
- Independent Channel Volume Controls With 48-dB to -79-dB Range—Soft Mute (50% Duty Cycle)
- Programmable Dynamic Range Control
- 7 Programmable Biquads for Speaker Equalization for Left and Right Channels
- 4 Programmable Biquads for Bass Processing
- Adaptive Biquad Coefficients for EQ and DRC Filters
- Programmable Input and Output Mixers
- Automatic Sample-Rate Detection and Coefficient Banking
General Features
- Serial Control Interface Operational Without MCLK
- Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal
- Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package
- Thermal and Short-Circuit Protection

All trademarks are the property of their respective owners.

Audio Input/Output
- 20-W into an 8- Load From an 18-V Supply
- Two Serial Audio Inputs (Four Audio Channels)
TAS5706A Supports:
- 2-Ch Bridged Outputs (20 W × 2)
TAS5706B Supports:
- 2-Ch Bridged Outputs (20 W × 2)
- 4-Ch Single-Ended Outputs (10 W × 4)
- 2-Ch Single-Ended + 1-Ch Bridged (2.1 Mode) (10 W × 2 + 20 W)
Supports 32-kHz-192-kHz Sample Rates (LJ/RJ/I²S)
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- Higher Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
- Constant Output Power Over Variation in Supply
Wide PVCC Range From (10 V to 26 V)
- No Separate Supply Required for Gate Drive
Headphone PWM Outputs
Subwoofer PWM Outputs
AM Interference Avoidance Support
Audio/PWM Processing
- Independent Channel Volume Controls With 48-dB to -79-dB Range—Soft Mute (50% Duty Cycle)
- Programmable Dynamic Range Control
- 7 Programmable Biquads for Speaker Equalization for Left and Right Channels
- 4 Programmable Biquads for Bass Processing
- Adaptive Biquad Coefficients for EQ and DRC Filters
- Programmable Input and Output Mixers
- Automatic Sample-Rate Detection and Coefficient Banking
General Features
- Serial Control Interface Operational Without MCLK
- Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal
- Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package
- Thermal and Short-Circuit Protection

All trademarks are the property of their respective owners.

The TAS5706A/B is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.

The TAS5706A/B is a slave-only device receiving all clocks from external sources. The TAS5706A/B operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5706A/B is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.

The TAS5706A/B is a slave-only device receiving all clocks from external sources. The TAS5706A/B operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

filter

Buscar otro/a Amplificadores de audio de uso general

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Reemplazo con funcionalidad mejorada del dispositivo comparado

TAS5706B

ACTIVO

Amplificador de audio de clase D con EQ de altavoz, DRC y salida SE, estéreo de 20 W, fuente de alim Supports 10W x 4-channel and 2.1 mode

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TAS5805M

ACTIVO

Amplificador de audio de clase D con procesamiento, estéreo de 23 W, mono de 45 W, fuente de aliment Higher output power

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	20W stereo Digital Audio Power Amplifier With EQ and DRC. datasheet (Rev. D)		10 sep 2009
	EVM User's guide	TAS5706AEVM - User Guide		30 oct 2008

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)

Solicitar

Encapsulado	Pines	Símbolos CAD, huellas y modelos 3D
HTQFP (PAP)	64	Ultra Librarian

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TAS5706A

Amplificador de potencia de audio I2S de circuito cerrado estéreo de 20 W con EQ de altavoz y DRC

TAS5706A

Detalles del producto

Productos similares que pueden interesarle

Reemplazo con funcionalidad mejorada del dispositivo comparado

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

Documentación técnica

Diseño y desarrollo

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos