Inicio Audio, háptica y piezoeléctrica Amplificadores de audio Amplificadores de audio para uso automotriz
Inicio
Audio, háptica y piezoeléctrica
Amplificadores de audio
Amplificadores de audio para uso automotriz
NUEVO

TAS6884-Q1

ACTIVO

Amplificador automotriz de audio de clase D de cuatro canales con entrada digital de 13 A y 48 V y d

Haga su pedido ahora
Hoja de datos

TAS6884-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Output power (W) 250 Power stage supply (max) (V) 48 Power stage supply (min) (V) 4.5 Speaker channels (max) 4 Features Current sense, Low latency, real-time load diagnostics, thermal pad up Audio input type Digital Input Control interface I2C THD + N at 1 kHz (%) 0.03 Switching frequency (max) (Hz) 2000000 Output noise voltage (µV) 37 Sampling rate (max) (Hz) 192000 Rating Automotive Operating temperature range (°C) -40 to 125
Output power (W) 250 Power stage supply (max) (V) 48 Power stage supply (min) (V) 4.5 Speaker channels (max) 4 Features Current sense, Low latency, real-time load diagnostics, thermal pad up Audio input type Digital Input Control interface I2C THD + N at 1 kHz (%) 0.03 Switching frequency (max) (Hz) 2000000 Output noise voltage (µV) 37 Sampling rate (max) (Hz) 192000 Rating Automotive Operating temperature range (°C) -40 to 125
— (—) — See data sheet
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5V to 48V supply voltage, 50V load dump
    • Support for 1.8V and 3.3V I/O
    • I2C control with 8 address options
    • <2W idle power loss at 14.4V, <8µA max VBAT+PVDD shutdown loss
  • Integrated DSP processing
    • Class-H supply voltage control
    • Thermal monitoring and foldback
    • Clip detection, PVDD monitoring and foldback
  • Output current sensing by channel using I2S/TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions Open load, Shorted load while playing audio
    • Real-time temperature monitor for each channel
  • DC and AC Standby load diagnostics
  • Audio inputs
    • 2-4 channel I2S or 4-16 channel TDM input
    • Input sample rates: 44.1, 48, 96, 192kHz
    • Low latency <100µs at 96k sample rate
  • Audio outputs
    • 384kHz to 2MHz configurable output switching frequency
    • Up to 13A channel output current
    • 400VA peak BTL output power
    • 136W (48V, 8Ω, 1% THD+N, BTL)
    • 250W (48V, 4Ω, 1% THD+N, BTL)
    • 418W (45V, 2Ω, 1% THD+N, PBTL)
  • Audio Performance
    • THD+N 0.03% (8Ω, 1W, 1kHz)
    • 111dB SNR
    • 37µV (14.4V), 80µV (45V) output noise
  • Protection
    • Output short protection
    • DC offset, undervoltage and overvoltage
    • Configurable overtemperature warning and individual channel shutdown
    • I2C temperature and supply voltage readout
  • Easily meet CISPR25L5 EMC specification
    • Advanced spread-spectrum
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5V to 48V supply voltage, 50V load dump
    • Support for 1.8V and 3.3V I/O
    • I2C control with 8 address options
    • <2W idle power loss at 14.4V, <8µA max VBAT+PVDD shutdown loss
  • Integrated DSP processing
    • Class-H supply voltage control
    • Thermal monitoring and foldback
    • Clip detection, PVDD monitoring and foldback
  • Output current sensing by channel using I2S/TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions Open load, Shorted load while playing audio
    • Real-time temperature monitor for each channel
  • DC and AC Standby load diagnostics
  • Audio inputs
    • 2-4 channel I2S or 4-16 channel TDM input
    • Input sample rates: 44.1, 48, 96, 192kHz
    • Low latency <100µs at 96k sample rate
  • Audio outputs
    • 384kHz to 2MHz configurable output switching frequency
    • Up to 13A channel output current
    • 400VA peak BTL output power
    • 136W (48V, 8Ω, 1% THD+N, BTL)
    • 250W (48V, 4Ω, 1% THD+N, BTL)
    • 418W (45V, 2Ω, 1% THD+N, PBTL)
  • Audio Performance
    • THD+N 0.03% (8Ω, 1W, 1kHz)
    • 111dB SNR
    • 37µV (14.4V), 80µV (45V) output noise
  • Protection
    • Output short protection
    • DC offset, undervoltage and overvoltage
    • Configurable overtemperature warning and individual channel shutdown
    • I2C temperature and supply voltage readout
  • Easily meet CISPR25L5 EMC specification
    • Advanced spread-spectrum

The TAS6884-Q1 is a four-channel, digital-input, high-voltage, Class-D audio amplifier that supports up to 48V supply voltage. The device provides four channels at 155W (48V, 8Ω, 1% THD, BTL) and 250W (48V, 4Ω, 1% THD, BTL).

The TAS6884-Q1 integrates DC and AC load diagnostics to determine the status of the connected loads before enabling the output stage. During audio playback, the status can be monitored through the output current sense and temperature of each channel which is available for each channel, and reports the measurement to a host processor through TDM with minimal delay.

The device monitors the output load condition while playing audio using real-time load diagnostics which operate independently from the host and audio input. To optimize system efficiency, the integrated DSP of the TAS6884-Q1 enables Class-H envelope tracking control, eliminating the need for the development of complex tracking software and external microcontroller.

The TAS6884-Q1 device features an additional low-latency signal path for each channel, providing up to 70% faster signal processing at 48kHz and support an audio signal path latency of < 100µs at 96kHz sample rate, which enables time-sensitive Active Noise Cancellation (ANC), Road Noise Cancellation (RNC) applications.

The TAS6884-Q1 is offered in a 64-pin QFP package with the exposed thermal pad up, TAS6884-Q1 is pin-to-pin compatible with TAS6684A-Q1.

The TAS6884-Q1 is a four-channel, digital-input, high-voltage, Class-D audio amplifier that supports up to 48V supply voltage. The device provides four channels at 155W (48V, 8Ω, 1% THD, BTL) and 250W (48V, 4Ω, 1% THD, BTL).

The TAS6884-Q1 integrates DC and AC load diagnostics to determine the status of the connected loads before enabling the output stage. During audio playback, the status can be monitored through the output current sense and temperature of each channel which is available for each channel, and reports the measurement to a host processor through TDM with minimal delay.

The device monitors the output load condition while playing audio using real-time load diagnostics which operate independently from the host and audio input. To optimize system efficiency, the integrated DSP of the TAS6884-Q1 enables Class-H envelope tracking control, eliminating the need for the development of complex tracking software and external microcontroller.

The TAS6884-Q1 device features an additional low-latency signal path for each channel, providing up to 70% faster signal processing at 48kHz and support an audio signal path latency of < 100µs at 96kHz sample rate, which enables time-sensitive Active Noise Cancellation (ANC), Road Noise Cancellation (RNC) applications.

The TAS6884-Q1 is offered in a 64-pin QFP package with the exposed thermal pad up, TAS6884-Q1 is pin-to-pin compatible with TAS6684A-Q1.
filter Buscar otro/a Amplificadores de audio para uso automotriz
Descargar Ver vídeo con transcripción Video

La hoja de datos completa y otros recursos de diseño están disponibles. Solicitar ahora

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TAS6884-Q1 48V​​​, 13A Digital Input 4-Channel Automotive Class-D Audio Amplifier With Current Sense and Real-time Load Diagnostics datasheet PDF | HTML 26/08/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TAS6884Q1EVM — Módulo de evaluación TAS6884-Q1

El TAS6884Q1EVM presenta el amplificador de audio automotriz TAS6884Q1 de clase D de bucle cerrado, cuatro canales y entrada digital con DSP integrado. El EVM requiere el uso del complemento de interfaz gráfica de usuario PurePath™ Console (PPC3) para programar la configuración de los registros de (...)

Productos y hardware compatibles
Soporte de software

TAS6884-Q1-DESIGN — TAS6884-Q1 documents

Access TAS6884-Q1 full datasheet and design files
Productos y hardware compatibles
Certificación

TAS6884Q1EVM-DOC-CERT — TAS6884Q1EVM EU Declaration of Conformity (DoC)

TAS6884Q1EVM EU Declaration of Conformity (DoC)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
— (—) —
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos