TLV2543

ACTIVO

Serie ADC de 66 kSPS y 12 bits apagado programable, primer MSB/LSB, modo de autocomprobación incorpo

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 12-Bit Analog-to-Digital Converters With Serial Control And 11 Analog Inputs datasheet (Rev. C) (Inglés)

TLV2543

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Resolution (Bits)

12

Sample rate (max) (ksps)

66

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

3.6

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

3.3

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Digital supply (min) (V)

3

Digital supply (max) (V)

3.6

Resolution (Bits)

12

Sample rate (max) (ksps)

66

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

3.6

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

3.3

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Digital supply (min) (V)

3

Digital supply (max) (V)

3.6

PDIP (N)

20

228.702 mm² 24.33 x 9.4

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

SSOP (DB)

20

56.16 mm² 7.2 x 7.8

12-Bit-Resolution A/D Converter
10-us Conversion Time Over Operating Temperature Range
11 Analog Input Channels
3 Built-In Self-Test Modes
Inherent Sample and Hold Function
Linearity Error...±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Unipolar or Bipolar Output Operation (Signed Binary With Respect to Half of the Applied Referenced Voltage)
Programmable MSB or LSB First
Programmable Power Down
Programmable Output Data Length
CMOS Technology

12-Bit-Resolution A/D Converter
10-us Conversion Time Over Operating Temperature Range
11 Analog Input Channels
3 Built-In Self-Test Modes
Inherent Sample and Hold Function
Linearity Error...±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Unipolar or Bipolar Output Operation (Signed Binary With Respect to Half of the Applied Referenced Voltage)
Programmable MSB or LSB First
Programmable Power Down
Programmable Output Data Length
CMOS Technology

The TLV2543C and TLV2543I are 12-bit, switched-capacitor, successive-approximation, analog-to-digital converters (ADCs). Each device has three control inputs [chip select (CS\), the input-output clock (I/O CLOCK), and the address input (DATA INPUT)] and is designed for communication with the serial port of a host processor or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host.

In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.

The TLV2543 is available in the DW, DB, and N packages. The TLV2543C is characterized for operation from 0°C to 70°C, and the TLV2543I is characterized for operation from -40°C to 85°C.

The TLV2543C and TLV2543I are 12-bit, switched-capacitor, successive-approximation, analog-to-digital converters (ADCs). Each device has three control inputs [chip select (CS\), the input-output clock (I/O CLOCK), and the address input (DATA INPUT)] and is designed for communication with the serial port of a host processor or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host.

In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.

The TLV2543 is available in the DW, DB, and N packages. The TLV2543C is characterized for operation from 0°C to 70°C, and the TLV2543I is characterized for operation from -40°C to 85°C.

open-in-new

Buscar otro/a ADC de precisión

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

	Tipo	Título	Fecha
*	Data sheet	12-Bit Analog-to-Digital Converters With Serial Control And 11 Analog Inputs datasheet (Rev. C)	05 jun 2000
	E-book	Best of Baker's Best: Precision Data Converters -- SAR ADCs	21 may 2015
	Application note	Determining Minimum Acquisition Times for SAR ADCs, part 2	17 mar 2011
	Application note	Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)	10 nov 2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de cálculo

ANALOG-ENGINEER-CALC — Calculadora para ingenieros analógicos

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Ver opciones

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Solicitar

Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Guía del usuario: PDF

Ver opciones

Paquete	Pasadores	Descargar
PDIP (N)	20	Ver opciones
SOIC (DW)	20	Ver opciones
SSOP (DB)	20	Ver opciones

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TLV2543

Serie ADC de 66 kSPS y 12 bits apagado programable, primer MSB/LSB, modo de autocomprobación incorpo

TLV2543

Detalles del producto

Documentación técnica

Diseño y desarrollo

ANALOG-ENGINEER-CALC — Calculadora para ingenieros analógicos

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

TINA-TI — Programa de simulación analógica basado en SPICE

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos