TMAG5134

ACTIVO

Interruptor de efecto Hall en plano de baja tolerancia y alta sensibilidad

Detalles del producto

Type Omnipolar switch, Unipolar switch Supply current (µA) 0.405, 0.405, 0.44, 0.44, 0.79, 0.79, 0.944, 0.944 Bandwidth (kHz) 0.00125, 0.005, 0.01, 0.02 Rating Catalog Operating temperature range (°C) -40 to 125 Output Push-Pull output driver
Type Omnipolar switch, Unipolar switch Supply current (µA) 0.405, 0.405, 0.44, 0.44, 0.79, 0.79, 0.944, 0.944 Bandwidth (kHz) 0.00125, 0.005, 0.01, 0.02 Rating Catalog Operating temperature range (°C) -40 to 125 Output Push-Pull output driver
SOT-23 (DBV) 3 8.12 mm² (2.9 mm × 2.8 mm) X1LGA (ZFC) 4 1.17 mm² (1.3 mm × 0.9 mm)
  • Supply range: 1.65V to 5.5V
  • Operating temperature range: –40°C to 125°C
  • In-plane axis of sensitivity
  • Integrated magnetic concentrator
  • Magnetic pole detection options:
    • Omnipolar
    • Dual-unipolar
  • Output type:
    • Push-pull
    • Open-drain
  • Available in both active low and active high
  • Magnetic operate points (BOP)
    • 0.9mT
    • 1.0mT
    • 1.3mT
    • 1.5mT
    • 2mT
  • Low average current consumption ICCAVG
    • 1.25Hz: 0.5µA
    • 5Hz: 0.6µA
    • 10Hz: 0.9µA
    • 20Hz: 1.4µA
  • Industry standard package and pinout
    • SOT-23 (DBV)
    • X1LGA (ZFC)
  • Supply range: 1.65V to 5.5V
  • Operating temperature range: –40°C to 125°C
  • In-plane axis of sensitivity
  • Integrated magnetic concentrator
  • Magnetic pole detection options:
    • Omnipolar
    • Dual-unipolar
  • Output type:
    • Push-pull
    • Open-drain
  • Available in both active low and active high
  • Magnetic operate points (BOP)
    • 0.9mT
    • 1.0mT
    • 1.3mT
    • 1.5mT
    • 2mT
  • Low average current consumption ICCAVG
    • 1.25Hz: 0.5µA
    • 5Hz: 0.6µA
    • 10Hz: 0.9µA
    • 20Hz: 1.4µA
  • Industry standard package and pinout
    • SOT-23 (DBV)
    • X1LGA (ZFC)

The TMAG5134 is a high sensitivity, low power, in-plane hall effect digital switch designed to replace TMR, AMR and Reed switches. The TMAG5134 features an integrated magnetic concentrator to achieve higher sensitivity and lower power consumption than traditional hall effect devices.

The TMAG5134 product family is available in packages with either a single omni-polar output (SOT-23) or with two independent unipolar outputs (X1LGA). The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.

To minimize power consumption, the TMAG5134 is internally duty-cycled. The device has a push-pull (CMOS) output which eliminates the need for an external pullup resistor, and is available in industry standard SOT-23 and X1LGA packages. The TMAG5134 is also available in an open-drain configuration.

The TMAG5134 is a high sensitivity, low power, in-plane hall effect digital switch designed to replace TMR, AMR and Reed switches. The TMAG5134 features an integrated magnetic concentrator to achieve higher sensitivity and lower power consumption than traditional hall effect devices.

The TMAG5134 product family is available in packages with either a single omni-polar output (SOT-23) or with two independent unipolar outputs (X1LGA). The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.

To minimize power consumption, the TMAG5134 is internally duty-cycled. The device has a push-pull (CMOS) output which eliminates the need for an external pullup resistor, and is available in industry standard SOT-23 and X1LGA packages. The TMAG5134 is also available in an open-drain configuration.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TMAG5134 High Sensitivity, In-Plane Hall-Effect Switch With Concentrator datasheet (Rev. F) PDF | HTML 24/03/2026
Artículo técnico The Hall effect: How an in-plane switch increases sensitivity and lowers design cost PDF | HTML 27/08/2025
Nota sobre la aplicación Replacing Reed and Magnetoresistive Switches With Cost-Effective, Low-Power Hall-Effect Switches (Rev. B) PDF | HTML 5/08/2025
Application brief Benefits of Hall-Effect Sensors in Contact Sensors (Rev. B) PDF | HTML 22/07/2025
Application brief How Hall-Effect Sensors are Used in Electronic Smart Locks (Rev. B) PDF | HTML 22/07/2025
Nota sobre la aplicación Position Sensing in Electronic Smart Locks Using Hall-Effect Sensors (Rev. B) PDF | HTML 22/07/2025
Certificado TMAG5134EVM EU Declaration of Conformity (DoC) 1/07/2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

HALL-ADAPTER-EVM — Módulo de evaluación de adaptador de derivación para sensores Hall

Acelere la creación y las pruebas de sus sensores de interruptor, bloqueo y efecto Hall lineal con el HALL-ADAPTER-EVM, que proporciona una forma rápida, fácil y económica de interactuar con circuitos integrados pequeños. Puede conectar cualquier sensor Hall compatible mediante las tiras de (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

TMAG5134EVM — Módulo de evaluación TMAG5134

El TMAG5134EVM proporciona una plataforma fácil de usar para evaluar o crear prototipos con el interruptor de efecto Hall TMAG5134. Este módulo de evaluación (EVM) incluye un imán además del TMAG5134EVM.
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de simulación

TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool

Puede usar la herramienta web TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) para estimar la densidad de flujo magnético y las salidas del sensor magnético de TI para sistemas de detección de posición magnética. Seleccione entre nuestra gama de sensores magnéticos para emular a la perfección el rendimiento (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23 (DBV) 3 Ultra Librarian
X1LGA (ZFC) 4 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos