TMUX136

ACTIVO

Interruptor analógico de 2 canales, 2:1 (SPDT), con capacitancia en estado activo de 1.4 pF, 3.3 V y

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E) (Inglés) PDF | HTML

TMUX136

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Protocols

Analog, I2C, I3C, LVDS, UART

Configuration

2:1 SPDT

Number of channels

2

Bandwidth (MHz)

6100

Supply voltage (max) (V)

4.8

Ron (typ) (mΩ)

4600

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

4.8

Supply current (typ) (µA)

30

Operating temperature range (°C)

-40 to 125

Crosstalk (dB)

-37

ESD CDM (kV)

1

Input/output continuous current (max) (mA)

20

COFF (typ) (pF)

1.6

CON (typ) (pF)

1.4

Off isolation (typ) (dB)

-34

OFF-state leakage current (max) (µA)

10

Ron (max) (mΩ)

7500

Ron channel match (max) (Ω)

0.1

Turnoff time (disable) (max) (ns)

400

Turnon time (enable) (max) (ns)

400

VIH (min) (V)

1.3

VIL (max) (V)

0.6

Rating

Catalog

Protocols

Analog, I2C, I3C, LVDS, UART

Configuration

2:1 SPDT

Number of channels

2

Bandwidth (MHz)

6100

Supply voltage (max) (V)

4.8

Ron (typ) (mΩ)

4600

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

4.8

Supply current (typ) (µA)

30

Operating temperature range (°C)

-40 to 125

Crosstalk (dB)

-37

ESD CDM (kV)

1

Input/output continuous current (max) (mA)

20

COFF (typ) (pF)

1.6

CON (typ) (pF)

1.4

Off isolation (typ) (dB)

-34

OFF-state leakage current (max) (µA)

10

Ron (max) (mΩ)

7500

Ron channel match (max) (Ω)

0.1

Turnoff time (disable) (max) (ns)

400

Turnon time (enable) (max) (ns)

400

VIH (min) (V)

1.3

VIL (max) (V)

0.6

Rating

Catalog

UQFN (RSE)

10

3 mm² 2 x 1.5

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

filter

Buscar otro/a Protocolo e interruptores de bus y multiplexores

Descargar Ver vídeo con transcripción Video

Consulte productos similares en el inventario de TI.com

Productos con especificaciones similares, ordenados por inventario disponible en TI.com.

Ver ahora

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TMUX121

ACTIVO

Interruptor de 2 canales, 2 pF, 3.3 V, 2:1 (SPDT), con lógica compatible de 1.8 V Supply device with compatible control inputs and powered-off protection

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 9

	Tipo	Título		Fecha
*	Data sheet	TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E)	PDF \| HTML	05 jun 2023
	Application note	Designing with Multiple Multiplexers in Series: A Guide to Cascading Multiplexers	PDF \| HTML	31 ene 2024
	Application brief	Important Multiplexer Characteristics for I3C Applications	PDF \| HTML	27 jul 2023
	Application brief	Best Practices: I2C Devices on an I3C Shared Bus	PDF \| HTML	30 mar 2023
	Application brief	1.8-V Logic for Multiplexers and Signal Switches (Rev. C)	PDF \| HTML	26 jul 2022
	Application note	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	02 jun 2022
	Application note	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	01 dic 2021
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	06 ene 2021
	Application brief	Improve Stability Issues with Low Con Multiplexers (Rev. A)		10 dic 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Adaptador de interfaz

LEADLESS-ADAPTER1 — Adaptador de montaje en superficie a cabezal DIP para pruebas de los encapsulados sin plomo de 6, 8,

La placa EVM-LEADLESS1 permite realizar pruebas rápidas y prototipado de los encapsulados sin plomo habituales de TI. La placa tiene huellas para convertir los encapsulados de montaje en superficie DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW, RTE, RTJ, RUK, RUC, RUG, RUM, RUT y YZP de TI a cabezales (...)

Guía del usuario: PDF