TMUX1511

ACTIVO

Interruptor analógico de 5 V, 1:1 (SPST) y 4 canales con protección contra desconexión y lógica de e

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TMUX1511 Low-Capacitance, 1:1 (SPST) 4-Channel, Powered-Off Protected Switch with 1.8V Logic datasheet (Rev. B) (Inglés) PDF | HTML

TMUX1511

ACTIVO

Haga su pedido ahora

Detalles del producto

Protocols

Analog, I2C, I2S, JTAG, RGMII, SPI, TDM, UART

Configuration

1:1 SPST

Number of channels

4

Bandwidth (MHz)

3000

Ron (typ) (mΩ)

2000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

5.5

Supply current (typ) (µA)

37

ESD HBM (typ) (kV)

2

Operating temperature range (°C)

-40 to 125

ESD CDM (kV)

0.75

Input/output continuous current (max) (mA)

25

COFF (typ) (pF)

2.5

CON (typ) (pF)

3.3

OFF-state leakage current (max) (µA)

0.1

Ron (max) (mΩ)

4500

Ron channel match (max) (Ω)

0.28

VIH (min) (V)

1.2

VIL (max) (V)

0.45

Rating

Catalog

Protocols

Analog, I2C, I2S, JTAG, RGMII, SPI, TDM, UART

Configuration

1:1 SPST

Number of channels

4

Bandwidth (MHz)

3000

Ron (typ) (mΩ)

2000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

5.5

Supply current (typ) (µA)

37

ESD HBM (typ) (kV)

2

Operating temperature range (°C)

-40 to 125

ESD CDM (kV)

0.75

Input/output continuous current (max) (mA)

25

COFF (typ) (pF)

2.5

CON (typ) (pF)

3.3

OFF-state leakage current (max) (µA)

0.1

Ron (max) (mΩ)

4500

Ron channel match (max) (Ω)

0.28

VIH (min) (V)

1.2

VIL (max) (V)

0.45

Rating

Catalog

X2QFN (RWB)

12

2.56 mm² (1.6 mm × 1.6 mm)

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

UQFN (RSV)

16

4.68 mm² (2.6 mm × 1.8 mm)

Wide Supply Range: 1.5V to 5.5V
Low On-Capacitance: 3.3pF
Low On-Resistance: 2Ω
High Bandwidth: 3GHz
-40°C to +125°C Operating Temperature
1.8V Logic Compatible
Supports Input Voltage Beyond Supply
Integrated Pull Down Resistor on Logic Pins
Bidirectional Signal Path
Fail-Safe Logic
Powered-off protection up to 3.6V
- Pinout compatible to SN74CBTLV3126
- Pinout compatible (logic variant) of SN74CBTLV3125

Wide Supply Range: 1.5V to 5.5V
Low On-Capacitance: 3.3pF
Low On-Resistance: 2Ω
High Bandwidth: 3GHz
-40°C to +125°C Operating Temperature
1.8V Logic Compatible
Supports Input Voltage Beyond Supply
Integrated Pull Down Resistor on Logic Pins
Bidirectional Signal Path
Fail-Safe Logic
Powered-off protection up to 3.6V
- Pinout compatible to SN74CBTLV3126
- Pinout compatible (logic variant) of SN74CBTLV3125

The TMUX1511 is a complementary metal-oxide semiconductor (CMOS) switch. The TMUX1511 offers 1:1 SPST switch configuration with 4 independently controlled channels. Wide operating supply of 1.5V to 5.5V allows for use in a broad array of applications from servers and communication equipment to industrial applications. The device supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins and can pass signals above supply up to VDD x 2, with a maximum input/output voltage of 5.5V.

Up to 3.6V on the signal path of the TMUX1511 provides isolation when the supply voltage is removed (VDD = 0V). Without this protection feature, switches can back-power the supply rail through an internal ESD diode and cause potential damage to the system.

Fail-Safe Logic circuitry allows voltages on the logic control pins to be applied before the supply pin, protecting the device from potential damage. All logic control inputs have 1.8V logic compatible thresholds, ensuring both TTL and CMOS logic compatibility when operating in the valid supply voltage range.

The TMUX1511 is a complementary metal-oxide semiconductor (CMOS) switch. The TMUX1511 offers 1:1 SPST switch configuration with 4 independently controlled channels. Wide operating supply of 1.5V to 5.5V allows for use in a broad array of applications from servers and communication equipment to industrial applications. The device supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins and can pass signals above supply up to VDD x 2, with a maximum input/output voltage of 5.5V.

Up to 3.6V on the signal path of the TMUX1511 provides isolation when the supply voltage is removed (VDD = 0V). Without this protection feature, switches can back-power the supply rail through an internal ESD diode and cause potential damage to the system.

Fail-Safe Logic circuitry allows voltages on the logic control pins to be applied before the supply pin, protecting the device from potential damage. All logic control inputs have 1.8V logic compatible thresholds, ensuring both TTL and CMOS logic compatibility when operating in the valid supply voltage range.

filter

Buscar otro/a Protocolo e interruptores de bus y multiplexores

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 11

Documentación principal	Tipo	Título	Opciones de formato
*	Hoja de datos	TMUX1511 Low-Capacitance, 1:1 (SPST) 4-Channel, Powered-Off Protected Switch with 1.8V Logic datasheet (Rev. B)	PDF \| HTML	26/03/2025
	Application brief	Selecting the Right Multiplexer for a Discrete Programmable Gain Amplifier (PGA) (Rev. A)	PDF \| HTML	31/07/2025
	Application brief	1.8-V Logic for Multiplexers and Signal Switches (Rev. C)	PDF \| HTML	26/07/2022
	Nota sobre la aplicación	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	2/06/2022
	Nota sobre la aplicación	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	1/12/2021
	Application brief	Enabling SPI-Based Flash Memory Expansion by Using Multiplexers (Rev. B)	PDF \| HTML	7/10/2021
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	6/01/2021
	Artículo técnico	Optimizing for protection and precision in servo drive control modules with multip	PDF \| HTML	9/10/2020
	Artículo técnico	Roll with the design punches and overcome power-sequencing challenges	PDF \| HTML	29/07/2019
	Application brief	Improve Stability Issues with Low Con Multiplexers (Rev. A)		10/12/2018
	Artículo técnico	Logic gates and switches with Ioff or powered-off protection: empowering you to po	PDF \| HTML	2/11/2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Adaptador de interfaz

LEADED-ADAPTER1 — Adaptador de montaje superficial a cabezal DIP para pruebas rápidas de los encapsulados con plomo de

La placa EVM-LEADED1 permite realizar pruebas rápidas y prototipado de los encapsulados con plomo habituales de TI. La placa tiene huellas para convertir los encapsulados de montaje en superficie D, DBQ, DCT, DCU, DDF, DGS, DGV y PW de TI a cabezales DIP con espaciamiento de 100 mil.

Guía del usuario: PDF

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible