TMUX8612

ACTIVO

Interruptores de 100 V, RON plano, 1:1 (SPST), de 4 canales, con inmunidad al efecto de cierre y lóg

Detalles del producto

Configuration 1:1 SPST Number of channels 4 Power supply voltage - single (V) 12, 16, 20, 24, 36, 40, 44, 50, 72, 100 Power supply voltage - dual (V) +/- 25, +/-10, +/-12, +/-15, +/-18, +/-20, +/-22, +/-36, +/-50 Protocols Analog Ron (typ) (Ω) 14 CON (typ) (pF) 15 ON-state leakage current (max) (µA) 0.008 Supply current (typ) (µA) 65 Bandwidth (MHz) 480 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Rating Catalog Negative rail supply voltage (max) (V) -50
Configuration 1:1 SPST Number of channels 4 Power supply voltage - single (V) 12, 16, 20, 24, 36, 40, 44, 50, 72, 100 Power supply voltage - dual (V) +/- 25, +/-10, +/-12, +/-15, +/-18, +/-20, +/-22, +/-36, +/-50 Protocols Analog Ron (typ) (Ω) 14 CON (typ) (pF) 15 ON-state leakage current (max) (µA) 0.008 Supply current (typ) (µA) 65 Bandwidth (MHz) 480 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Rating Catalog Negative rail supply voltage (max) (V) -50
WQFN (RUM) 16 16 mm² 4 x 4
  • High supply voltage capable:
    • Dual supply: ±10V to ±50V
    • Single supply: 10V to 100V
    • Asymmetric dual supply operation: including +10V / –90V
  • Consistent parametric across supply voltages
  • Latch-up immune
  • High continuous current: 150mA
  • Low input leakage: 110pA at 50°C
  • Low charge injection: –13pC
  • Low off isolation & crosstalk: < –100dB
  • Low On-Resistance flatness: 0.4Ω
  • Low On-Resistance: 14Ω
  • Low off-capacitance: 7pF
  • Removes need for additional logic rail (VL)
  • 1.8V Logic capable
  • Fail-safe logic: up to 48V independent of supply
  • Integrated Pull-Down resistor on logic pins
  • Bidirectional signal path
  • Wide operating temperature TA: –40°C to 125°C
  • Industry-standard small WQFN package
  • High supply voltage capable:
    • Dual supply: ±10V to ±50V
    • Single supply: 10V to 100V
    • Asymmetric dual supply operation: including +10V / –90V
  • Consistent parametric across supply voltages
  • Latch-up immune
  • High continuous current: 150mA
  • Low input leakage: 110pA at 50°C
  • Low charge injection: –13pC
  • Low off isolation & crosstalk: < –100dB
  • Low On-Resistance flatness: 0.4Ω
  • Low On-Resistance: 14Ω
  • Low off-capacitance: 7pF
  • Removes need for additional logic rail (VL)
  • 1.8V Logic capable
  • Fail-safe logic: up to 48V independent of supply
  • Integrated Pull-Down resistor on logic pins
  • Bidirectional signal path
  • Wide operating temperature TA: –40°C to 125°C
  • Industry-standard small WQFN package

The TMUX861x is a modern high voltage capable analog switches with Latch-Up immunity. Each device has four independently controllable 1:1, single-pole single-throw (SPST) switch channels. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100V. The TMUX861x devices provide consistent analog parametric performance across the entire supply voltage range. The TMUX861x family supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8V, 3.3V, and 5V and can be connected as high as 48V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device family provides Latch-Up immunity, preventing undesirable high current events between parasitic structures within the device. A Latch-Up condition typically continues until the power supply rails are turned off and can lead to device failure. The Latch-Up immunity feature allows this family of multiplexers to be used in harsh environments.

The TMUX861x is a modern high voltage capable analog switches with Latch-Up immunity. Each device has four independently controllable 1:1, single-pole single-throw (SPST) switch channels. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100V. The TMUX861x devices provide consistent analog parametric performance across the entire supply voltage range. The TMUX861x family supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8V, 3.3V, and 5V and can be connected as high as 48V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device family provides Latch-Up immunity, preventing undesirable high current events between parasitic structures within the device. A Latch-Up condition typically continues until the power supply rails are turned off and can lead to device failure. The Latch-Up immunity feature allows this family of multiplexers to be used in harsh environments.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TMUX861x 100V, Flat Ron, 1:1 (SPST), 4-Channel Switches with Latch-Up Immunity and 1.8V Logic datasheet (Rev. A) PDF | HTML 21 abr 2025
Application note Key Voltage Considerations for Replacing a Photorelay With an Analog Switch PDF | HTML 10 mar 2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMUXRUM-RRPEVM — Módulo de evaluación genérico TMUX para encapsulados de 16 pines RUM y RRP de cuádruple plano sin pl

El TMUXRUM-RRPEVM permite la rápida creación de prototipos y la caracterización de CC de la línea de productos TMUX de TI que utilizan encapsulados RUM o RRP (QFN) de 16 pines y está preparado para funcionar a alta tensión.

Guía del usuario: PDF | HTML
Modelo de simulación

TMUX8612 IBIS Model

SCDM333.ZIP (39 KB) - IBIS Model
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RUM) 16 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos