Inicio Interruptores y multiplexores Interruptores y multiplexores analógicos Protocolo e interruptores de bus y multiplexores
Inicio
Interruptores y multiplexores
Interruptores y multiplexores analógicos
Protocolo e interruptores de bus y multiplexores

TMUXHS4212

ACTIVO

Multiplexador/demultiplexador diferencial de 16 Gbps, 2:1/1:2 y 2 canales

Haga su pedido ahora
Hoja de datos

TMUXHS4212

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Protocols PCIe1, PCIe2, PCIe3, PCIe4, SAS1, SAS2, SAS3, SATA1, SATA2, SATA3, USB 3.1, USB 3.2 Gen 1x2, USB 3.2 Gen 2x1, USB-C Configuration 2:1 SPDT Number of channels 2 USB speed (Mbps) 16000 Bandwidth (MHz) 13000 Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 3 Ron (typ) (mΩ) 5000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 2 Supply current (typ) (µA) 600 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 105 COFF (typ) (pF) 0.6 CON (typ) (pF) 0.4 Off isolation (typ) (dB) -75 OFF-state leakage current (max) (µA) 1 Ron (max) (mΩ) 8000 Ron channel match (max) (Ω) 0.5 Turnoff time (disable) (max) (ns) 500 Turnon time (enable) (max) (ns) 500 Rating Catalog
Protocols PCIe1, PCIe2, PCIe3, PCIe4, SAS1, SAS2, SAS3, SATA1, SATA2, SATA3, USB 3.1, USB 3.2 Gen 1x2, USB 3.2 Gen 2x1, USB-C Configuration 2:1 SPDT Number of channels 2 USB speed (Mbps) 16000 Bandwidth (MHz) 13000 Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 3 Ron (typ) (mΩ) 5000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 2 Supply current (typ) (µA) 600 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 105 COFF (typ) (pF) 0.6 CON (typ) (pF) 0.4 Off isolation (typ) (dB) -75 OFF-state leakage current (max) (µA) 1 Ron (max) (mΩ) 8000 Ron channel match (max) (Ω) 0.5 Turnoff time (disable) (max) (ns) 500 Turnon time (enable) (max) (ns) 500 Rating Catalog
VQFN (RKS) 20 11.25 mm² 4.5 x 2.5
  • Provides bidirectional 2:1 mux or 1:2 demux
  • Supports USB 3.2 up to 10 Gbps (Gen 2.0) and PCI Express up to 16 Gbps (Gen 4.0)
  • Also supports SATA, SAS, Mipi DSI/CSI, FPD-Link III, LVDS, SFI and Ethernet interfaces
  • −3-dB differential BW of 13 GHz
  • Dynamic characteristics:
    • Insertion loss = −1.3 / −1.8 dB at 5 / 8 Ghz
    • Return loss = −13/ −12 dB at 5 / 8 Ghz
    • Off isolation = −22 / −20 dB at 5 / 8 Ghz
  • Adaptive common mode voltage tracking
  • Supports common mode voltage up to 0 to 1.8 V
  • Single supply voltage VCC of 3.3 or 1.8 V
  • Ultra low active (180 µA) and standby power consumption (< 2 µA)
  • Industrial temperature option with −40° to 105°C
  • Available in 2.5 mm × 4.5 mm QFN package
  • Provides bidirectional 2:1 mux or 1:2 demux
  • Supports USB 3.2 up to 10 Gbps (Gen 2.0) and PCI Express up to 16 Gbps (Gen 4.0)
  • Also supports SATA, SAS, Mipi DSI/CSI, FPD-Link III, LVDS, SFI and Ethernet interfaces
  • −3-dB differential BW of 13 GHz
  • Dynamic characteristics:
    • Insertion loss = −1.3 / −1.8 dB at 5 / 8 Ghz
    • Return loss = −13/ −12 dB at 5 / 8 Ghz
    • Off isolation = −22 / −20 dB at 5 / 8 Ghz
  • Adaptive common mode voltage tracking
  • Supports common mode voltage up to 0 to 1.8 V
  • Single supply voltage VCC of 3.3 or 1.8 V
  • Ultra low active (180 µA) and standby power consumption (< 2 µA)
  • Industrial temperature option with −40° to 105°C
  • Available in 2.5 mm × 4.5 mm QFN package

The TMUXHS4212 is a high-speed bidirectional passive switch in mux or demux configurations. It is suited for many applications including USB Type-C™ and PCI Express. The TMUXHS4212 is a generic analog differential passive mux or demux that works for many high-speed differential interfaces with data rates up to 16 Gbps. The device can be used for higher data rates where the electrical channel has signal integrity margins. The TMUXHS4212 supports differential signaling with common mode voltage range (CMV) of up to 0 to 1.8 V and with differential amplitude up to 1800 mVpp. Adaptive CMV tracking ensures the channel through the device remains unchanged for the entire common mode voltage range.

The dynamic characteristics of the TMUXHS4212 allows high-speed switching, minimum attenuation to the signal eye diagram, and with very little added jitter. The device’s silicon design is optimized for excellent frequency response at higher frequency spectrum of the signals. Its silicon signal traces and switch network are matched for best intra-pair skew performance.

The TMUXHS4212 has an extended industrial temperature range that suits many rugged applications including industrial and high reliability use cases.

The TMUXHS4212 is a high-speed bidirectional passive switch in mux or demux configurations. It is suited for many applications including USB Type-C™ and PCI Express. The TMUXHS4212 is a generic analog differential passive mux or demux that works for many high-speed differential interfaces with data rates up to 16 Gbps. The device can be used for higher data rates where the electrical channel has signal integrity margins. The TMUXHS4212 supports differential signaling with common mode voltage range (CMV) of up to 0 to 1.8 V and with differential amplitude up to 1800 mVpp. Adaptive CMV tracking ensures the channel through the device remains unchanged for the entire common mode voltage range.

The dynamic characteristics of the TMUXHS4212 allows high-speed switching, minimum attenuation to the signal eye diagram, and with very little added jitter. The device’s silicon design is optimized for excellent frequency response at higher frequency spectrum of the signals. Its silicon signal traces and switch network are matched for best intra-pair skew performance.

The TMUXHS4212 has an extended industrial temperature range that suits many rugged applications including industrial and high reliability use cases.
filter Buscar otro/a Protocolo e interruptores de bus y multiplexores
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Tipo Título Fecha
* Data sheet TMUXHS4212 Two-Channel Differential 2:1 MUX or 1:2 Demux datasheet (Rev. A) PDF | HTML 05 mar 2022
Application note Passive Mux Selection Based On Bandwidth (Rev. A) PDF | HTML 31 jul 2024
Application note Schematic Checklist of TMUXHS4212EVM and TMUXHS4412EVM PDF | HTML 16 mar 2021
White paper Test Report for Cascade Analog Multiplexers PDF | HTML 24 nov 2020
Certificate TMUXHS4212EVM EU Declaration of Conformity (DoC) 29 jul 2020
Application note High-Speed Layout Guidelines for Signal Conditioners and USB Hubs 14 jun 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMUXHS4212EVM — Módulo de evaluación de interruptor de multiplexador/demultiplexador diferencial de 20 Gbps, 2:1/1:2

El módulo de evaluación (EVM) TMUXHS4212 se puede utilizar para evaluar el rendimiento de la conmutación pasiva bidireccional de alta velocidad para aplicaciones USB tipo C™ multiplexores o demultiplexores que admiten velocidades de datos USB 3.1 Gen 1, Gen 2.  También es compatible con los (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TMUXHS4212 s-parameter model

SLAM350.ZIP (249 KB) - S-Parameter Model
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RKS) 20 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos