DRV8806

アクティブ

シリアル制御機能と負荷開路検出機能搭載、40V、3A、クワッド、ローサイド・モーター・ドライバ

製品詳細

Vs (min) (V) 8.2 Vs ABS (max) (V) 43 Full-scale current (A) 2 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 500 Control mode Serial Control interface Serial Features Open-Load Detection Rating Catalog Operating temperature range (°C) -40 to 85
Vs (min) (V) 8.2 Vs ABS (max) (V) 43 Full-scale current (A) 2 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 500 Control mode Serial Control interface Serial Features Open-Load Detection Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • 4-Channel Protected Low-Side Driver
    • Four NMOS FETs With Overcurrent Protection
    • Integrated Inductive Clamp Diodes
    • Serial Interface
    • Open/Shorted Load Detection
  • 2-A (Single Channel On)/1-A (All Channels On)
    Maximum Drive Current per Channel (at 25°C)
  • 8.2-V to 40-V Operating Supply Voltage Range
  • Thermally-Enhanced Surface Mount Package
  • 4-Channel Protected Low-Side Driver
    • Four NMOS FETs With Overcurrent Protection
    • Integrated Inductive Clamp Diodes
    • Serial Interface
    • Open/Shorted Load Detection
  • 2-A (Single Channel On)/1-A (All Channels On)
    Maximum Drive Current per Channel (at 25°C)
  • 8.2-V to 40-V Operating Supply Voltage Range
  • Thermally-Enhanced Surface Mount Package

The DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.

The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).

A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.

Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.

The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).

The DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.

The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).

A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.

Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.

The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
11 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8806 Quad Serial Interface Low-Side Driver IC データシート (Rev. C) PDF | HTML 2015年 12月 16日
アプリケーション・ノート Using DRV to Drive Solenoids (Rev. A) PDF | HTML 2022年 4月 24日
アプリケーション・ノート How to Drive Unipolar Stepper Motor with the DRV8xxx PDF | HTML 2021年 12月 3日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
技術記事 Drive unipolar stepper motors as bipolar stepper motors with a simple wiring recon PDF | HTML 2020年 4月 9日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
ユーザー・ガイド DRV8803-04-05-06 EVM GUI (Rev. B) 2017年 4月 26日
その他の技術資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
アプリケーション・ノート Understanding Motor Driver Current Ratings 2012年 2月 6日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 ダウンロード
HTSSOP (PWP) 16 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ