SN74CBTH16211
- 5-
Switch Connection Between Two Ports - TTL-Compatible Input Levels
- Bus Hold on Data Inputs/Outputs Eliminates the Need for External Pullup/Pulldown Resistors
The SN74CBTH16211 provides 24 bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.
The device is organized as dual 12-bit bus switches with separate output-enable (OE\) inputs. It can be used as two 12-bit bus switches or one 24-bit bus switch. When OE\ is low, the associated 12-bit bus switch is on, and the A port is connected to the B port. When OE\ is high, the switch is open, and a high-impedance state exists between the two ports.
Active bus-hold circuitry is provided to hold unused or floating A and B ports at a valid logic level.
To ensure the high-impedance state during power up or power down, OE\ should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
お客様が関心を持ちそうな類似品
比較対象デバイスと類似の機能。
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | 24-Bit FET Bus Switch With Bus Hold データシート (Rev. C) | 2001/11/13 | |||
| アプリケーション・ノート | テキサス インスツルメンツの信号スイッチの選定 | PDF | HTML | PDF | HTML | 2026/06/29 | ||
| アプリケーション・ノート | Multiplexers and Signal Switches Glossary (Rev. B) | PDF | HTML | 2021/12/01 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| TSSOP (DGG) | 56 | Ultra Librarian |