ADS112S14
- Low power consumption (as low a 57µA)
- Wide supply voltage range:
- Analog: 1.74V to 3.6V
- Digital: 1.65V to 3.6V
- Programmable gain: 0.5 to 256
- Programmable data rate (up to 64kSPS) and speed mode to trade power consumption and noise performance
- Simultaneous 50Hz and 60Hz rejection at 20 or 25SPS with single-cycle settling digital filter
- Analog multiplexer with 8 independently selectable inputs
- Dual-matched programmable current sources
- Internal programmable voltage reference:1.25V or 2.5V with 25ppm/°C (max) drift
- Internal 1% (max) accurate oscillator
- Internal temperature sensor
- Four general-purpose I/Os (push-pull or open-drain output)
- SPI-compatible interface with optional CRC and daisy-chain capability
The ADS1x2S14 are precision, low-power, 16- and 24-bit, analog-to-digital converters (ADCs) that offer many integrated features to reduce system cost and component count in the most common sensor measurement applications. The devices feature eight analog inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), a programmable low-drift voltage reference, two programmable excitation current sources, an oscillator, and a temperature sensor.
Four speed modes, with programmable output data rates from 20SPS up to 64kSPS, allow to optimize power consumption and noise performance for each application. At output data rates of 20SPS and 25SPS, the integrated digital filter offers simultaneous 50Hz and 60Hz line-cycle rejection with single-cycle settling.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS122S14EVM-PDK — ADS122S14 평가 모듈
ADC-TEMP-SENSOR-FW — Temperature-sensor firmware source files
이 온도 센서 선형화 펌웨어는 저항 온도 감지기(RTD), 열전대, 서미스터(NTC, PTC 등) 및 아날로그 온도 센서를 포함한 가장 일반적인 온도 센서를 측정하고 선형화하는 소프트웨어 루틴을 제공합니다.
이 소프트웨어에는 ADC와 마이크로프로세서(MCU) 간의 통신을 가능하게 하는 아날로그-디지털 컨버터(ADC) 하드웨어 추상화 계층, 센서 데이터를 온도 값으로 변환하고 선형화하는 센서 API, 소스 코드를 사용하여 센서, 정밀 ADC 및 MCU를 사용하여 온도를 판독하는 방법을 보여주는 예제가 포함되어 있습니다.
ADS122S14-C-EXAMPLE-CODE — ADS122S14 C code example
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.