ADS1174
- Simultaneously Sample Four/Eight Channels
- Selectable Operating Modes:
High-Speed: 52kSPS Data Rate, 31mW/ch
Low-Power: 10kSPS Data Rate, 7mW/ch - AC Performance:
25kHz Bandwidth
97dB SNR
-105dB THD - DC Performance:
2µV/°C Offset Drift
2ppm/°C Gain Drift - Digital Filter:
Linear Phase Response
Passband Ripple: ±0.005dB
Stop Band Attenuation: 100dB - Selectable SPI or Frame Sync Serial Interface
- Simple Pin-Driven Control
- Low Sampling Aperture Error
- Specified from -40°C to +105°C
- Analog Supply: 5V
- I/O Supply: 1.8V to 3.3V
- Digital Core Supply: 1.8V
- APPLICATIONS
- 3-Phase Power Monitors
- Defibrillators and ECG Monitors
- Coriolis Flow Meters
- Vibration/Modal Analysis
PowerPAD is a trademark of Texas Instruments.
SPI is a trademark of Motorola, Inc.
The ADS1174 (quad) and ADS1178 (octal) are multiple delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with data rates up to 52k samples-per-second (SPS), which allow synchronous sampling of four and eight channels. These devices use identical packages, and are also compatible with the high-performance 24-bit ADS1274 and ADS1278, permitting drop-in upgrades.
The delta-sigma architecture offers near ideal 16-bit ac performance (97dB SNR, -105dB THD, 1LSB linearity) combined with 0.005dB passband ripple and linear phase response.
The high-order, chopper-stabilized modulator achieves very low drift (2µV/°C offset, 2ppm/°C gain) and low noise (1LSBPP). The on-chip finite impulse response (FIR) filter provides a usable signal bandwidth up to 90% of the Nyquist rate with 100dB of stop band attenuation while suppressing modulator and signal out-of-band noise.
Two operating modes allow for optimization of speed and power: High-speed mode (31mW/Ch at 52kSPS), and Low-power mode (7mW/Ch at 10kSPS).
A SYNC input control pin allows the device conversions to be started and synchronized to an external event. SPI and Frame-Sync serial interfaces are supported. The device is fully specified over the extended industrial range (40°C to +105°C) and is available in an HTQFP-64 PowerPAD package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | Quad/Octal, Simultaneous Sampling, 16-Bit Analog-to-Digital Converters datasheet (Rev. B) | 2008. 9. 12 | ||
| Application brief | ADS1278QML-SP Power-On Reset Procedure (Rev. A) | PDF | HTML | 2026. 7. 10 | ||
| 애플리케이션 노트 | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023. 3. 29 | ||
| e북 | Fundamentals of Precision ADC Noise Analysis (Rev. A) | 2020. 6. 19 | |||
| 아날로그 디자인 학술지 | How delta-sigma ADCs work, Part 1 (Rev. A) | 2016. 9. 19 | |||
| 백서 | Voltage-reference impact on total harmonic distortion | 2016. 8. 1 | |||
| 아날로그 디자인 학술지 | How delta-sigma ADCs work, Part 2 | 2011. 11. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS1278EVM-PDK — ADS1278 평가 모듈
ADS117XSW-LINUX — ADS117x Linux 드라이버
The Linux driver supports the ADS117x family of Quad/Octal, Simultaneous Sampling, 16-Bit Analog-to-Digital Converters. The Linux driver supports communication through the SPI bus and interfaces with the Linux DAPM (Dynamic Audio Power Management for Portable Devices) class.
Linux Mainline Status
(...)
ADS1X7X-EXCEL-CALC-TOOL — ADS1x7x Design Calculator
- ADS1x7x Excel 계산기 툴은 ADS1x7x 장치의 구성을 간소화하는 몇 가지 편리한 툴을 제공합니다. 이 툴을 사용하면 사용자가 ADS1x7x 광대역 아날로그-디지털 컨버터(ADC)로 설계를 최적화하는 데 도움이 되는 다양한 설정 및 작동 모드를 이해할 수 있습니다. 이 툴에는 ADC 변환 계산기, 디지털 필터 응답 계산기, 데이지 체인 구성 탭 및 SNR 예측기가 포함되어 있습니다. ADS1x7x 계산기는 공통 프로그래밍 및 장치 설정 장애물을 제거하여 시장 출시 시간을 단축합니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PAP) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.