ADS41B25
- Resolution: 12-Bit, 125MSPS
- Integrated High-Impedance
Analog Input Buffer:- Input Capacitance at dc: 3.5pF
- Input Resistance at dc: 10kΩ
- Maximum Sample Rate: 125MSPS
- Ultralow Power:
- 1.8V Analog Power: 114mW
- 3.3V Buffer Power: 96mW
- I/O Power: 100mW (DDR LVDS)
- High Dynamic Performance:
- SNR: 68.3dBFS at 170MHz
- SFDR: 87dBc at 170MHz
- Output Interface:
- Double Data Rate (DDR) LVDS with Programmable Swing and Strength:
- Standard Swing: 350mV
- Low Swing: 200mV
- Default Strength: 100Ω Termination
- 2x Strength: 50Ω Termination
- 1.8V Parallel CMOS Interface Also Supported
- Double Data Rate (DDR) LVDS with Programmable Swing and Strength:
- Programmable Gain for SNR/SFDR Trade-Off
- DC Offset Correction
- Supports Low Input Clock Amplitude
- Package: QFN-48 (7mm × 7mm)
PowerPAD is a trademark of Texas Instruments, Incorporated.
All other trademarks are the property of their respective owners.
The ADS41B25 is a member of the ultralow-power ADS4xxx analog-to-digital converter (ADC) family, featuring integrated analog input buffers. This device uses innovative design techniques to achieve high dynamic performance, while consuming extremely low power. The analog input pins have buffers, with the benefits of constant performance and input impedance across a wide frequency range. The device is well-suited for multi-carrier, wide bandwidth communications applications such as PA linearization.
The ADS41B25 has features such as digital gain and offset correction. The gain option can be used to improve SFDR performance at lower full-scale input ranges, especially at high input frequencies. The integrated dc offset correction loop can be used to estimate and cancel the ADC offset. At lower sampling rates, the ADC automatically operates at scaled-down power with no loss in performance.
The device supports both double data rate (DDR) low-voltage differential signaling (LVDS) and parallel CMOS digital output interfaces. The low data rate of the DDR LVDS interface (maximum 500MBPS) makes it possible to use low-cost field-programmable gate array (FPGA)-based receivers. The device has a low-swing LVDS mode that can be used to further reduce the power consumption. The strength of the LVDS output buffers can also be increased to support 50Ω differential termination.
The device is available in a compact QFN-48 package and is specified over the industrial temperature range (–40°C to +85°C).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | 12-Bit, 125MSPS Ultra-Low Power ADC with Analog Buffer datasheet | 2011. 6. 22 | ||
| * | 사용 설명서 | Interfacing Altera FPGAs to ADS4249 and DAC3482 (TIDA-00069 Reference Guide) | 2012. 7. 10 | ||
| 애플리케이션 노트 | Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A) | 2015. 5. 22 | |||
| 애플리케이션 노트 | Why Use Oversampling when Undersampling Can Do the Job? (Rev. A) | 2013. 7. 19 | |||
| 애플리케이션 노트 | Band-Pass Filter Design Techniques for High-Speed ADCs | 2012. 2. 27 | |||
| 애플리케이션 노트 | High-Speed, Analog-to-Digital Converter Basics | 2012. 1. 11 | |||
| 애플리케이션 노트 | CDCE62005 as Clock Solution for High-Speed ADCs | 2008. 9. 4 | |||
| 애플리케이션 노트 | CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital Converters | 2008. 6. 8 | |||
| 애플리케이션 노트 | Phase Noise Performance and Jitter Cleaning Ability of CDCE72010 | 2008. 6. 2 | |||
| 애플리케이션 노트 | QFN Layout Guidelines | 2006. 7. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS41B25EVM — ADS41B25 12비트, 125MSPS 아날로그-디지털 컨버터 평가 모듈
The ADS41B25EVM is a circuit board that allows designers to evaluate the performance of Texas Instruments‘ ADS41B25 device, an extremely low power 12-bit 125 MSPS analog to digital converter with integrated high-impedance input buffer. The ADC features a configurable parallel DDR LVDS or CMOS (...)
TSW3085EVM — 광대역 전송 신호 체인 평가 보드 및 레퍼런스 디자인
The TSW3085 Evalutaion Module is a circuit board that allows system designers to evaluate the combined performance of Texas Instruments' transmit signal chain with the LMK04806B (formally National Semiconductor) low noise clock generator/jitter cleaner. For ease of use as a complete RF transmit (...)
DATACONVERTERPRO-SW — 고속 데이터 컨버터 프로 GUI 설치 프로그램, v5.31
이 고속 데이터 컨버터 프로 GUI는 대부분의 TI 고속 데이터 컨버터 [ADC(아날로그-디지털 컨버터) 및 DAC(디지털-아날로그 컨버터)] 및 AFE(아날로그 프론트 엔드) 플랫폼을 평가할 수 있도록 설계된 PC(Windows® XP/7/10 호환) 프로그램입니다. 전체 TSW14xxx 시리즈의 데이터 캡처 및 패턴 생성 카드를 지원하도록 설계된 DATACONVERTERPRO-SW는 시간 및 주파수 영역 모두에서 데이터 컨버터를 분석할 수 있는 강력하고 빠른 솔루션과 단일 톤, 멀티톤 및 변조 신호 지원을 제공합니다. 또한 이 (...)
SLAC384 — ADS41xx SPI GUI rev1.6
SBAC120 — TIGAR Support Files
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
SBAC119 — TIGAR (Texas Instruments Graphical Evaluation of ADC Response Tool)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.