ADS5403
- Single Channel
- 12-Bit Resolution
- Maximum Clock Rate: 500 Msps
- Low Swing Fullscale Input: 1.0 Vpp
- Analog Input Buffer with High Impedance Input
- Input Bandwidth (3dB): >1.2GHz
- Data Output Interface: DDR LVDS
- 196-Pin BGA Package (12×12mm)
- Power Dissipation: 1 W
- Spectral Performance at fIN = 230 MHz IF
- SNR: 60.6 dBFS
- SFDR: 80 dBc
- Spectral Performance at fIN = 700 MHz IF
- SNR: 59.5 dBFS
- SFDR: 72 dBc
The ADS5403 is a high linearity single channel 12-bit, 500 MSPS analog-to-digital converter (ADC) easing front end filter design for wide bandwidth receivers. The analog input buffer isolates the internal switching of the on-chip track-and-hold from disturbing the signal source as well as providing a high-impedance input. Optionally the output data can be decimated by two. Designed for high SFDR, the ADC has low-noise performance and outstanding spurious-free dynamic range over a large input-frequency range. The device is available in a 196pin BGA package and is specified over the full industrial temperature range (–40°C to 85°C).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | Single Channel 12-Bit 500Msps Receiver and Feedback IC, ADS5403 datasheet (Rev. B) | 2014. 1. 8 | ||
| 애플리케이션 노트 | Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A) | 2015. 5. 22 | |||
| 애플리케이션 노트 | Why Use Oversampling when Undersampling Can Do the Job? (Rev. A) | 2013. 7. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS5403EVM — ADS5403 12비트, 500MSPS 아날로그-디지털 컨버터 평가 모듈
ADS540x 및 ADS54T0x EVM은 설계자가 텍사스 인스트루먼트 ADS5401/02/03/04/07/09 싱글/듀얼 채널 12비트 500/800/900 MSPS ADC(아날로그-디지털 컨버터) 및 싱글/듀얼 채널 500/750 MSPS BTS 피드백 및 리시버 IC인 ADS54T01/T04/T02의 성능을 평가할 수 있는 회로 기판입니다. ADC에는 병렬 DDR LVDS 출력이 포함되어 있습니다. 이 EVM은 다양한 클록, 아날로그 입력 및 공급 조건에서 ADS540x를 테스트할 수 있는 유연한 환경을 제공합니다. (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
SBAC119 — TIGAR (Texas Instruments Graphical Evaluation of ADC Response Tool)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| NFBGA (ZAY) | 196 | Ultra Librarian |