ADS5482
- 80/105/135-MSPS Sample Rates
- 16-Bit Resolution
- SFDR: 95 dBc at 70 MHz and 135 MSPS
- SNR: 78.6 dBFS at 70 MHz and 135 MSPS
- Efficient DDR LVDS-Compatible Outputs
- Internal Dither Available
- Total Power Dissipation: 2.2 W
- Power-Down Mode: 70 mW
- On-Chip High Impedance Analog Buffer
- QFN-64 PowerPAD Package (9 mm × 9 mm Footprint)
- Industrial Temperature Range: –40°C to +85°C
- APPLICATIONS
- Wireless Infrastructure (Multi-Carrier GSM, WCDMA, LTE)
- Test and Measurement Instrumentation
- Software-Defined Radio
- Data Acquisition
- Power Amplifier Linearization
- Communication Instrumentation
- Radar
- Medical Imaging
All trademarks are the property of their respective owners.
The ADS5481/ADS5482/ADS5483 (ADS548x) is a 16-bit family of analog-to-digital converters (ADCs) that operate from both a 5-V supply and 3.3-V supply while providing LVDS-compatible digital outputs. The ADS548x integrated analog input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high-impedance input. An internal reference generator is also provided to simplify the system design.
Designed for highest total ENOB, the ADS548x family has outstanding low noise performance and spurious-free dynamic range.
The ADS548x is available in an QFN-64 PowerPAD package. The device is built on Texas Instruments complementary bipolar process (BiCom3) and is specified over the full industrial temperature range (–40°C to +85°C).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | 16-Bit, 80/105/135 MSPS High-Speed ADCs datasheet (Rev. C) | 2009. 10. 6 | ||
| 애플리케이션 노트 | Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A) | 2015. 5. 22 | |||
| 애플리케이션 노트 | Why Use Oversampling when Undersampling Can Do the Job? (Rev. A) | 2013. 7. 19 | |||
| 애플리케이션 노트 | High-Speed, Analog-to-Digital Converter Basics | 2012. 1. 11 | |||
| 애플리케이션 노트 | Input Impedance Measurement Using ADC FFT Data | 2011. 1. 11 | |||
| 애플리케이션 노트 | Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A) | 2010. 9. 10 | |||
| 애플리케이션 노트 | Smart Selection of ADC/DAC Enables Better Design of Software-Defined Radio | 2009. 4. 28 | |||
| 애플리케이션 노트 | CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital Converters | 2008. 6. 8 | |||
| 애플리케이션 노트 | Phase Noise Performance and Jitter Cleaning Ability of CDCE72010 | 2008. 6. 2 | |||
| 애플리케이션 노트 | QFN Layout Guidelines | 2006. 7. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS5482EVM — ADS5482 16비트, 105MSPS 아날로그-디지털 컨버터 평가 모듈
ADS5482EVM은 설계자가 DDR LVDS 출력이 포함된 16비트 105 MSPS ADC인 텍사스 인스트루먼트 ADS5482 디바이스를 평가할 수 있는 회로 기판입니다. 제품에 논리 분석기 분리 보드가 들어 있어 Agilent E5405A 또는 Tektronix P6980 터치리스 프로브를 사용해 ADC의 LVDS 출력을 직접 캡처할 수 있습니다. ADS5482EVM은 TI의 TSW1400EVM 또는 TSW1405EVM 고속 LVDS 평가 및 캡처 시스템과 호환되기 때문에 샘플을 캡처하여 PC에 전달하여 빠른 분석 및 평가를 (...)
DATACONVERTERPRO-SW — 고속 데이터 컨버터 프로 GUI 설치 프로그램, v5.31
이 고속 데이터 컨버터 프로 GUI는 대부분의 TI 고속 데이터 컨버터 [ADC(아날로그-디지털 컨버터) 및 DAC(디지털-아날로그 컨버터)] 및 AFE(아날로그 프론트 엔드) 플랫폼을 평가할 수 있도록 설계된 PC(Windows® XP/7/10 호환) 프로그램입니다. 전체 TSW14xxx 시리즈의 데이터 캡처 및 패턴 생성 카드를 지원하도록 설계된 DATACONVERTERPRO-SW는 시간 및 주파수 영역 모두에서 데이터 컨버터를 분석할 수 있는 강력하고 빠른 솔루션과 단일 톤, 멀티톤 및 변조 신호 지원을 제공합니다. 또한 이 (...)
ADC-HARMONIC-CALC — ADC Frequency Calculator Download
The ADC Harmonic Calculation tool is an excel based calculator for determining the location in frequency space of high order harmonics following Nyquist aliasing in an analog to digital converter.
Given an ADC sample rate and the span of a signal of interest the calcultor will determine if the 2nd (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
JITTER-SNR-CALC — Jitter and SNR calculator
JITTER-SNR-CALC can be used for calculating theoretical Signal to Noise (SNR) performance of ADCs based on input frequency and clock jitter.
SBAC119 — TIGAR (Texas Instruments Graphical Evaluation of ADC Response Tool)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGC) | 64 | Ultra Librarian |