ADS8422
- Fully Differential Input with Pseudo-Bipolar Input Range -4 V to +4 V
- 16-Bit NMC at 4 MSPS
- 1 LSB INL Typ
- 92dB SNR, -102dB THD Typ with 100-kHz Input
- Internal 4.096-V Reference and Reference Buffer
- REFIN/2 Available for Setting Analog Input Common-Mode Voltage
- Zero Latency
- High-Speed Parallel Interface
- Single Supply Operation Capability
- Low Power: 155 mW at 4 MHz Typ, Flexible Power-Down Scheme
- Pin-Out Similar to ADS8412/8402
- 48-Pin 9×9 TQFP Package
- APPLICATIONS
- DWDM
- Instrumentation
- High-Speed, High-Resolution, Zero Latency Data Acquisition Systems
- Transducer Interface
- Medical Instruments
- Spectrum Analysis
- ATE
The ADS8422 is a 16-bit, 4-MHz A/D converter with an internal 4.096-V reference. The device includes a 16-bit capacitor-based multi-bit SAR A/D converter with inherent sample and hold. This converter includes a full 16-bit interface and an 8-bit option where data is read using two 8-bit read cycles if necessary.
The ADS8422 has a fully differential, pseudo-bipolar input. It is available in a 48-lead TQFP package and is characterized over the industrial -40°C to +85°C temperature range.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | 16-Bit 4MSPS Fully Differential Pseudo Bipolar Input Micro Power Sampling ADC datasheet (Rev. B) | 2006. 12. 6 | |||
| 백서 | Voltage-reference impact on total harmonic distortion | 2016. 8. 1 | ||||
| e북 | Best of Baker's Best: Precision Data Converters -- SAR ADCs | 2015. 5. 21 | ||||
| 애플리케이션 노트 | Determining Minimum Acquisition Times for SAR ADCs, part 2 | 2011. 3. 17 | ||||
| 애플리케이션 노트 | Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A) | 2010. 11. 10 | ||||
| 애플리케이션 노트 | ADS8422 Example Programs | 2006. 8. 30 | ||||
| 애플리케이션 노트 | Interfacing the ADS8401/ADS8411 to TMS320C6713 DSP | 2004. 9. 23 | ||||
| 애플리케이션 노트 | Interfacing the ADS8402/ADS8412 to TMS320C6713 DSP | 2004. 9. 23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
5-6KINTERFACE — 5~6K 인터페이스 평가 모듈
인터페이스 보드는 2개의 신호 컨디셔닝 사이트, 2개의 직렬 EVM 사이트 및 병렬 EVM 사이트로 구성됩니다. 인터페이스 유형에 관계없이 5-6K 인터페이스 보드와 호환되는 모든 EVM에는 표준 아날로그 인터페이스 및 표준 전원 커넥터가 있습니다. 3위치 나사 단자 J1 및 J2와 2위치 나사 단자 J6, J8, J9 및 J11을 통해 모든 사이트로 라우팅된 공통 전원 버스에 접근할 수 있습니다.
5-6K 인터페이스 보드는 데이터 컨버터 고객에게 텍사스 인스트루먼트의 데이터 수집 제품 평가를 위한 최대한의 유연성을 제공하도록 (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
JITTER-SNR-CALC — Jitter and SNR calculator
JITTER-SNR-CALC can be used for calculating theoretical Signal to Noise (SNR) performance of ADCs based on input frequency and clock jitter.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TQFP (PFB) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.