홈 데이터 컨버터 아날로그-디지털 컨버터(ADC) 정밀 ADC
홈
데이터 컨버터
아날로그-디지털 컨버터(ADC)
정밀 ADC
신규

ADS9324C

미리 보기

80V 공통 모드를 지원하는 16채널 16비트 1MSPS 동시 샘플링 ADC

지금 주문하기
데이터 시트

ADS9324C

미리 보기
데이터 시트 지금 주문하기

제품 상세 정보

Resolution (Bits) 16 Sample rate (max) (ksps) 1000 Number of input channels 16 Interface type SPI Architecture SAR Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.5, 5, 6.25, 10, 12.5, 25, 50 Input voltage range (min) (V) -50, -25, -12.5, -10, -6.25, -5, -2.5 Features Over-Voltage Protection, PGA Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 230 Analog supply voltage (min) (V) 1.7, 4.75 Analog supply voltage (max) (V) 1.9, 5.25 SNR (dB) 88 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
Resolution (Bits) 16 Sample rate (max) (ksps) 1000 Number of input channels 16 Interface type SPI Architecture SAR Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.5, 5, 6.25, 10, 12.5, 25, 50 Input voltage range (min) (V) -50, -25, -12.5, -10, -6.25, -5, -2.5 Features Over-Voltage Protection, PGA Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 230 Analog supply voltage (min) (V) 1.7, 4.75 Analog supply voltage (max) (V) 1.9, 5.25 SNR (dB) 88 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
VQFN (RSK) 64 64 mm² (8 mm × 8 mm)
  • 16-channel, 16-bit Simultaneous Sampling ADC
    • 1MSPS throughput on each channel
  • Integrated programmable gain amplifier
    • 1MΩ analog input impedance
    • Supports single-ended and differential inputs
    • Input ranges:
      • Differential input voltage: ±50V, ±25V, ±12.5V, ±10V, ±6.25V, ±5V, ±2.5V
      • Common mode voltage: ±40V
  • Analog bandwidth options: 25kHz and 400kHz
  • Open-wire safe inputs
    • Near zero ADC output code for floating inputs
  • Typical performance:
    • INL: ±0.5LSB; DNL: ±0.5LSB
    • SNR: 88dB; THD: –103dB; DC CMRR: 100dB
  • Low-drift, on-chip reference (4.096V) and buffer
    • 15ppm/°C typical temperature drift
  • Digital features
    • On-chip digital filters for oversampling
    • System offset, gain and phase calibration
    • Digital window comparators
    • ADC output data randomizer
  • Power Supply
    • Analog supplies: 5V and 1.8V
    • Digital I/O supply: 1.8V to 3.3V
  • Temperature range: –40°C to +125°C
  • 16-channel, 16-bit Simultaneous Sampling ADC
    • 1MSPS throughput on each channel
  • Integrated programmable gain amplifier
    • 1MΩ analog input impedance
    • Supports single-ended and differential inputs
    • Input ranges:
      • Differential input voltage: ±50V, ±25V, ±12.5V, ±10V, ±6.25V, ±5V, ±2.5V
      • Common mode voltage: ±40V
  • Analog bandwidth options: 25kHz and 400kHz
  • Open-wire safe inputs
    • Near zero ADC output code for floating inputs
  • Typical performance:
    • INL: ±0.5LSB; DNL: ±0.5LSB
    • SNR: 88dB; THD: –103dB; DC CMRR: 100dB
  • Low-drift, on-chip reference (4.096V) and buffer
    • 15ppm/°C typical temperature drift
  • Digital features
    • On-chip digital filters for oversampling
    • System offset, gain and phase calibration
    • Digital window comparators
    • ADC output data randomizer
  • Power Supply
    • Analog supplies: 5V and 1.8V
    • Digital I/O supply: 1.8V to 3.3V
  • Temperature range: –40°C to +125°C

The ADS9324C is a 16-channel, integrated data acquisition (DAQ) system based on a simultaneous-sampling, 16-bit successive approximation (SAR) analog-to-digital converter (ADC) operating at a maximum of 1MSPS per channel. The device features a complete analog front-end for each channel, including a programmable gain amplifier (PGA) with input impedance of 1MΩ, input clamp, low-pass filter, and an ADC input driver. The device also features a low-drift, precision reference with a buffer to drive the ADC. The high input impedance allows direct connection with sensors and transformers, thus eliminating the need for external driver circuits. The device supports both differential and single-ended inputs, allowing the device to be used with various sensor outputs.

The ADS9324C includes a flexible digital interface allowing the device to be used with a variety of host controllers. Users can configure the serial interface to read the ADC output on 1-lane, 2-lane, 4-lane, and 8-lane. The device also has flexibility to operate the ADC as 2-CH, 4-CH, 8-CH and 16-CH simultaneous sampling ADC.

The ADS9324C is a 16-channel, integrated data acquisition (DAQ) system based on a simultaneous-sampling, 16-bit successive approximation (SAR) analog-to-digital converter (ADC) operating at a maximum of 1MSPS per channel. The device features a complete analog front-end for each channel, including a programmable gain amplifier (PGA) with input impedance of 1MΩ, input clamp, low-pass filter, and an ADC input driver. The device also features a low-drift, precision reference with a buffer to drive the ADC. The high input impedance allows direct connection with sensors and transformers, thus eliminating the need for external driver circuits. The device supports both differential and single-ended inputs, allowing the device to be used with various sensor outputs.

The ADS9324C includes a flexible digital interface allowing the device to be used with a variety of host controllers. Users can configure the serial interface to read the ADC output on 1-lane, 2-lane, 4-lane, and 8-lane. The device also has flexibility to operate the ADC as 2-CH, 4-CH, 8-CH and 16-CH simultaneous sampling ADC.
filter 기타 정밀 ADC 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 ADS9324C 16 -Bit, 1MSPS , 16 -Channel, Precision ADC With 80Vpp Common-Mode Difference Amplifier datasheet PDF | HTML 2026. 6. 4

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

계산 툴

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.

이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.

지원되는 제품 및 하드웨어
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RSK) 64 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상