AFE5851
- 16 Variable Gain Amplifiers (VGA)
- 16 Single-Ended Buffered Inputs With 1VPP Maximum Swing
- 5.5nV/√Hz VCA Input Noise (31dB Gain).
- Variable Gain –5dB to 31dB With 0.125dB Steps
- Digital Gain Control
- 3rd Order Anti-Aliasing Filter With Programmable Cut-Off Frequency (7.5, 10 and 14MHz).
- Clamping
- Analog-to-Digital Converter (ADC)
- Octal channel 12-bit, 65 MSPS
- 32.5 MSPS Maximum per Input Channel
- 2 VGA Outputs Alternately Sampled by Each ADC
- Internal and External Reference Support
- No External Decoupling Required for References
- Serial LVDS Outputs
- 1.8V and 3.3V Supply
- 39 mW Total Power per Channel at 32.5 MSPS
- 64-QFN Package (9mm × 9mm)
- APPLICATIONS
- Imaging: Ultrasound, PET
- RELATED DEVICES
- AFE5801: Octal VGA+ADC, 65 MSPS/channel
The AFE5851 is an analog front-end targeting applications where the power and level of integration are critical. The device contains 16 variable gain amplifiers (VGA), followed by an octal high speed (up to 65 MSPS) analog to digital converter (ADC).
Each of the 16 single ended inputs is buffered, accepts up to 1VPP maximum input swing and it is followed by a VGA with a gain range from –5dB to 31dB. The VGA gain is digitally controlled and the gain curves versus time can be stored in memory, integrated within the device using the serial interface.
A selectable clamping and anti-alias low pass filter (with 3dB attenuation at 7.5, 10 or 14MHz) is also integrated between the VGA and ADC for every channel. The VGA/anti-alias filter outputs are differential (limited to 2 VPP) and drive the on-board 12-bit 65MSPS ADC that is shared between two VGAs to optimize the power dissipation. Each VGA output is sampled at alternate clock cycles, making the effective sampling frequency half the input clock rate. The ADC also scales down its power consumption should a lower sampling rate be selected.
The ADC outputs are serialized in LVDS streams further minimizing power and board area. The AFE5851 is available in a 64-pin QFN package (9x9mm2) and is specified over the full industrial temperature range (–40°C to 85°C).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | 16 CHANNEL VARIABLE GAIN AMPLIFIER (VGA) WITH OCTAL HIGH SPEED ADC datasheet (Rev. B) | 2010. 5. 3 | ||
| 사용 설명서 | AFE5851 16-Channel Variable Gain Ampl w/Octal High-Speed ADC (Rev. C) | 2015. 3. 5 | |||
| 사용 설명서 | TSW1250EVM: High-Speed LVDS Deserializer and Analysis System (Rev. F) | 2012. 1. 20 | |||
| 추가 자료 | Ultrasound flyer (Rev. A) | 2011. 9. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AFE5851EVM — AFE5851 평가 모듈
The AFE5851 includes an 16-channel Voltage-Controlled-Amplifier (VCA) with digital control and an 8-channel 65MSPS analog-to-digital converter (ADC). The 16 analog input signals will be processed by the analog front-end circuit of AFE5851; the outputs of the analog front-end will then be (...)
DATACONVERTERPRO-SW — 고속 데이터 컨버터 프로 GUI 설치 프로그램, v5.31
이 고속 데이터 컨버터 프로 GUI는 대부분의 TI 고속 데이터 컨버터 [ADC(아날로그-디지털 컨버터) 및 DAC(디지털-아날로그 컨버터)] 및 AFE(아날로그 프론트 엔드) 플랫폼을 평가할 수 있도록 설계된 PC(Windows® XP/7/10 호환) 프로그램입니다. 전체 TSW14xxx 시리즈의 데이터 캡처 및 패턴 생성 카드를 지원하도록 설계된 DATACONVERTERPRO-SW는 시간 및 주파수 영역 모두에서 데이터 컨버터를 분석할 수 있는 강력하고 빠른 솔루션과 단일 톤, 멀티톤 및 변조 신호 지원을 제공합니다. 또한 이 (...)
SLOC231 — TSW1250EVM Software
SLOC145 — AFE5801 and AFE5851 TGC Calculator
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGC) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.