BQ26200
- Multifunction Monitoring Device Designed to Work With an Intelligent Host Controller
- Provides State of Charge Information for Rechargeable Batteries
- Enhances Charge Termination
- High Accuracy Coulometric Charge and Discharge Current Integration With Automatic Offset Compensation
- Differential Current Sense
- 32 Bytes of General-Purpose RAM
- 96 Bytes of Flash (Including 32 Bytes of Shadow Flash)
- 8 Bytes of ID ROM
- Internal Temperature Sensor Eliminates Need for External Thermistor
- Multifunction Digital Output Port
- High-Accuracy Internal Timebase Eliminates External Crystal Oscillator
- Low Power Consumption
- Operating : < 95 µA
- Sleep: < 2 µA
- Single-Wire HDQ Serial Interface
- 8-Lead TSSOP Package
The bq26200 is an advanced battery monitoring IC designed to accurately measure the charge and discharge currents in rechargeable battery packs. Intended for pack integration, the bq26200 contains all the necessary functions to form the basis of a comprehensive battery capacity management system in portable applications such as cellular phones, PDA’s, or other portable products.
The bq26200 works with the host controller in the portable system to implement the battery management system. The host controller is responsible for interpreting the bq26200 data and communicating meaningful battery data to the end-user or power management system.
The bq26200 provides 64 bytes of general-purpose flash memory, 8 bytes of ID ROM and 32 bytes of flash backed RAM for data storage. The non-volatile memory can maintain formatted battery monitor information, identification codes, warranty information, or other critical battery parameters during periods when the battery is temporarily shorted or deeply discharged.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | High-Performance Battery Coulomb Counter for Cellular Phone Applications datasheet (Rev. A) | 2004/11/03 | |
| Application note | HDQ Communication Basics (Rev. A) | 2008/09/18 | ||
| Application note | HDQ Compatibility Between OMAP and BQ Products | 2004/06/17 | ||
| Application note | Gas Gauging Basics Using TI Battery Monitor ICs (Rev. A) | 2003/10/17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치