CC1021
- True Single-Chip UHF RF Transceiver
- Frequency Range 402 MHz
to 470 MHz and
804 MHz to 930 MHz - High Sensitivity
- Up to –112 dBm for 38.4 kHz Receiver Channel Filter Bandwidth
- Up to –106 dBm for 102.4 kHz Receiver Channel Filter Bandwidth
- Programmable Output Power
- Low Current Consumption
- RX: 19.9 mA
- Low Supply Voltage
- From 2.3 V to 3.6 V
- Very Few External Components Required
- Small Size
- QFN 32 Package
- Pb-Free Package
- Digital RSSI and Carrier Sense Indicator
- Data Rate Up to 153.6 kBaud
- OOK, FSK, and GFSK Data Modulation
- Integrated Bit Synchronizer
- Image Rejection Mixer
- Programmable Frequency
- Automatic Frequency Control (AFC)
- Suitable for Frequency Hopping Systems
- Suited for Systems Targeting Compliance With
EN 300 220 and FCC CFR47 Part 15 - Easy-to-Use Software for Generating the CC1021 Configuration Data
- Fully Compatible With CC1020 for Receiver Channel Filter Bandwidths of 38.4 kHz and Higher
The CC1021 device is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 433 MHz, 868 MHz, and 915 MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 930-MHz range.
The CC1021 device is especially suited for narrowband systems with channel spacing of 50 kHz and higher complying with EN 300 220 and CC CFR47 part 15.
The CC1021 device main operating parameters can be programmed through a serial bus, thus making the CC1021 device a very flexible and easy to use transceiver.
In a typical system, the CC1021 device is used together with a microcontroller and a few external passive components.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | CC1021 Single-Chip Low-Power RF Transceiver for Narrowband Systems datasheet (Rev. F) | PDF | HTML | 2018. 10. 31 | |
| * | 정오표 | CC1021 Errata Notes | 2006. 1. 31 | ||
| * | 방사능 및 안정성 보고서 | CC1021 Reliability Report | 2006. 4. 28 | ||
| 애플리케이션 노트 | DN035 -- Antenna Quick Guide (Rev. B) | 2022. 2. 9 | |||
| 애플리케이션 노트 | DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) | 2013. 2. 22 | |||
| 애플리케이션 노트 | AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) | 2012. 8. 2 | |||
| 애플리케이션 노트 | DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) | 2011. 8. 30 | |||
| 애플리케이션 노트 | AN058 -- Antenna Selection Guide (Rev. B) | 2010. 10. 6 | |||
| 애플리케이션 노트 | DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary | 2010. 8. 26 | |||
| 추가 자료 | CC1021 Material content | 2007. 7. 16 | |||
| 추가 자료 | CC1021 RoHS Confirmation | 2006. 1. 31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
SWRC046 — SmartRF(TM) Studio 6.13.1
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 장치에 대한 하드웨어 설계 검토
SimpleLink™ 1GHz 미만 하드웨어 설계 검토 프로세스 시작하기:
- 1단계: 검토를 요청하기 전에 기술 문서 및 설계, 해당 제품 페이지에서 사용 가능한 개발 리소스를 검토하는 것이 중요합니다(아래 CC1xxx 제품 페이지 링크 참조).
- 2단계: 하드웨어 설계 검토 요청 양식을 다운로드해 작성합니다
- 3단계: 작성한 하드웨어 설계 검토 요청 양식과 필요한 문서를 함께 connectivity-sub1ghz-hw-review@list.ti.com으로 이메일로 보냅니다
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RSS) | 32 | Ultra Librarian |