패키징 정보
| 패키지 | 핀 QFM (MOB) | 63 |
| 작동 온도 범위(°C) -20 to 70 |
| 패키지 수량 | 캐리어 750 | LARGE T&R |
CC3200MOD의 주요 특징
- CC3200MOD is a Wi-Fi module consisting of CC3200R1M2RGC single-chip wireless microcontroller (MCU)
- Fully integrated module includes all required clocks, SPI Flash, and passives
- Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
- Wi-Fi Alliance members can request certificate transfer of Wi-Fi CERTIFIED™ modules
- 1.27-mm pitch QFM package for easy assembly and low-cost PCB design
- Applications MCU subsystem:
- Arm® Cortex®-M4 core at 80 MHz
- Embedded memory:
- Integrated serial Flash
- RAM (up to 256KB)
- Peripheral drivers in ROM
- Hardware crypto engine for advanced hardware security including:
- AES, DES, and 3DES
- SHA and MD5
- CRC and Checksum
- 8-Bit parallel camera
- One Multichannel Audio Serial Port (McASP) interface with support for I2S format
- One SD (MMC) interface
- 32-channel Micro Direct Memory Access (µDMA)
- Two Universal Asynchronous Receivers and Transmitters (UARTs)
- Two Serial Peripheral Interfaces (SPIs)
- One Inter-integrated Circuit (I2C)
- Four General-Purpose Timers (GPTs)
- 16-Bit Pulse-Width Modulation (PWM) mode
- One Watchdog Timer Module
- 4-channel, 12-bit Analog-to-Digital Converters (ADCs)
- Up to 25 individually programmable GPIO pins
- Wi-Fi network processor subsystem:
- 802.11 b/g/n radio, baseband, and medium access control
- TCP/IP Stack
- Eight simultaneous TCP, UDP, or RAW sockets
- Two simultaneous TLS v1.2 or SSL 3.0 sockets
- ARP, ICMP, DHCP, DNS, and mDNS support
- HTTP server with built-in programmable HTML page for over-the-network device configuration
- Powerful crypto engine for fast, secured WLAN connections with 256-bit encryption
- Station, Access Point, and Wi-Fi Direct Modes
- WPA2 personal and enterprise security
- SimpleLink™ connection manager for managing Wi-Fi security states
- TX power:
- 17.0 dBm at 1 DSSS
- 17.25 dBm at 11 CCK
- 13.5 dBm at 54 OFDM
- RX sensitivity:
- –94.7 dBm at 1 DSSS
- –87.0 dBm at 11 CCK
- –73.0 dBm at 54 OFDM
- Application Throughput:
- UDP: 16 Mbps
- TCP: 13 Mbps
- Power-management subsystem:
- Integrated DC/DC converter with a wide-supply voltage:
- VBAT: 2.3 to 3.6 V
- Low-power consumption At 3.6 V:
- Hibernate with Real-Time Clock (RTC): 7 µA
- Low-Power Deep Sleep: <275 µA
- RX Traffic: 59 mA at 54 OFDM
- TX Traffic: 229 mA at 54 OFDM
- Package and operating conditions:
- 1.27-mm pitch, 63-Pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
- Operating temperature range: –20°C to +70°C
- Integrated DC/DC converter with a wide-supply voltage:
- Additional integrated components:
- 40.0-MHz crystal
- 32.768-kHz crystal (RTC)
- 8-Mbit SPI Serial Flash
- RF filter and passive components
- QFM package:
- 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
- Operating temperature:
- Ambient temperature range: –40°C to +85°C
- Module supports SimpleLink Developer’s Ecosystem
CC3200MOD에 대한 설명
Start your design with the industry’s first programmable FCC, IC, CE, and Wi-Fi CERTIFIED™ wireless MCU module with built-in Wi-Fi® connectivity. Created for the IoT, the SimpleLink™ CC3200MOD is a wireless MCU module that integrates an Arm® Cortex®-M4 MCU, allowing customers to develop an entire application with one device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI Flash, RF switch, and passives into an QFM package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E™ support community.
The applications MCU subsystem contains an industry-standard Arm® Cortex®-M4 core running at 80 MHz.
The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial Flash bootloader and peripheral drivers; and SPI Flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.
The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a chip™ and contains an additional dedicated Arm® MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC/DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 µA of current.