CC3200MOD
- CC3200MOD is a Wi-Fi module consisting of CC3200R1M2RGC single-chip wireless microcontroller (MCU)
- Fully integrated module includes all required clocks, SPI Flash, and passives
- Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
- Wi-Fi Alliance members can request certificate transfer of Wi-Fi CERTIFIED™ modules
- 1.27-mm pitch QFM package for easy assembly and low-cost PCB design
- Applications MCU subsystem:
- Arm® Cortex®-M4 core at 80 MHz
- Embedded memory:
- Integrated serial Flash
- RAM (up to 256KB)
- Peripheral drivers in ROM
- Hardware crypto engine for advanced hardware security including:
- AES, DES, and 3DES
- SHA and MD5
- CRC and Checksum
- 8-Bit parallel camera
- One Multichannel Audio Serial Port (McASP) interface with support for I2S format
- One SD (MMC) interface
- 32-channel Micro Direct Memory Access (µDMA)
- Two Universal Asynchronous Receivers and Transmitters (UARTs)
- Two Serial Peripheral Interfaces (SPIs)
- One Inter-integrated Circuit (I2C)
- Four General-Purpose Timers (GPTs)
- 16-Bit Pulse-Width Modulation (PWM) mode
- One Watchdog Timer Module
- 4-channel, 12-bit Analog-to-Digital Converters (ADCs)
- Up to 25 individually programmable GPIO pins
- Wi-Fi network processor subsystem:
- 802.11 b/g/n radio, baseband, and medium access control
- TCP/IP Stack
- Eight simultaneous TCP, UDP, or RAW sockets
- Two simultaneous TLS v1.2 or SSL 3.0 sockets
- ARP, ICMP, DHCP, DNS, and mDNS support
- HTTP server with built-in programmable HTML page for over-the-network device configuration
- Powerful crypto engine for fast, secured WLAN connections with 256-bit encryption
- Station, Access Point, and Wi-Fi Direct Modes
- WPA2 personal and enterprise security
- SimpleLink™ connection manager for managing Wi-Fi security states
- TX power:
- 17.0 dBm at 1 DSSS
- 17.25 dBm at 11 CCK
- 13.5 dBm at 54 OFDM
- RX sensitivity:
- –94.7 dBm at 1 DSSS
- –87.0 dBm at 11 CCK
- –73.0 dBm at 54 OFDM
- Application Throughput:
- UDP: 16 Mbps
- TCP: 13 Mbps
- Power-management subsystem:
- Integrated DC/DC converter with a wide-supply voltage:
- VBAT: 2.3 to 3.6 V
- Low-power consumption At 3.6 V:
- Hibernate with Real-Time Clock (RTC): 7 µA
- Low-Power Deep Sleep: <275 µA
- RX Traffic: 59 mA at 54 OFDM
- TX Traffic: 229 mA at 54 OFDM
- Package and operating conditions:
- 1.27-mm pitch, 63-Pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
- Operating temperature range: –20°C to +70°C
- Integrated DC/DC converter with a wide-supply voltage:
- Additional integrated components:
- 40.0-MHz crystal
- 32.768-kHz crystal (RTC)
- 8-Mbit SPI Serial Flash
- RF filter and passive components
- QFM package:
- 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
- Operating temperature:
- Ambient temperature range: –40°C to +85°C
- Module supports SimpleLink Developers Ecosystem
Start your design with the industry’s first programmable FCC, IC, CE, and Wi-Fi CERTIFIED™ wireless MCU module with built-in Wi-Fi® connectivity. Created for the IoT, the SimpleLink™ CC3200MOD is a wireless MCU module that integrates an Arm® Cortex®-M4 MCU, allowing customers to develop an entire application with one device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI Flash, RF switch, and passives into an QFM package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E™ support community.
The applications MCU subsystem contains an industry-standard Arm® Cortex®-M4 core running at 80 MHz.
The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial Flash bootloader and peripheral drivers; and SPI Flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.
The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a chip™ and contains an additional dedicated Arm® MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC/DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 µA of current.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
CC3200AUDBOOST — SimpleLink Wi-Fi CC3100 오디오 부스터팩
The SimpleLink™ Wi-Fi® CC3200 Audio BoosterPack enables the evaluation and development with the digital audio peripheral [I2S] present on the SimpleLink™ Wi-Fi® CC3200 device. It contains a Class-D power amplifier to drive speakers and an ultra-low power audio codec, TLV320AIC3254, supporting (...)
LB-3P-TRACE32-WIRELESS — 무선 연결용 Lauterbach TRACE32® 디버그 시스템
Lauterbach의 TRACE32® 툴은 개발자가 다양한 종류의 TI 무선 연결 칩을 분석, 최적화 및 인증할 수 있도록 하는 첨단 하드웨어 및 소프트웨어 구성 요소 제품군입니다. 세계적으로 유명한 임베디드 시스템용 디버그 솔루션은 초기 사전 실리콘 개발부터 현장의 제품 인증 및 문제 해결에 이르기까지 다음을 포함하는 모든 개발 단계를 위한 완벽한 솔루션입니다. 전체 온칩 중단점 지원, 런타임 메모리 액세스, 플래시 프로그래밍 및 벤치마크 카운터. 모든 것이 스크립팅이 가능하므로 개발자는 동일한 테스트 시퀀스를 계속해서 (...)
CC3200SDK — CC3200 Software Development Kit (SDK), Service Pack, and Add-Ons
The SimpleLink™ Wi-Fi® CC3200 SDK contains drivers for the CC3200 programmable MCU, 40+ sample applications, and documentation needed to use the solution. It also contains the flash programmer, a command line tool for flashing software, configuring network and software parameters (SSID, (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 무선 테스팅 툴
SimpleLink™ Wi-Fi® 무선 테스트 툴은 개발 및 인증 중 SimpleLink Wi-Fi CC31xx 및 CC32xx 설계를 RF 평가 및 테스트할 수 있는 Windows 기반 소프트웨어 툴입니다. 이 도구는 라디오를 전송 또는 수신 모드로 수동 설정해 낮은 수준의 라디오를 테스트하는 기능을 지원합니다. 이 툴을 사용하려면 무선 회로 이론 및 무선 테스트 방법에 대한 지식이 필요합니다.
IoT(사물 인터넷)용으로 제작된 SimpleLink Wi-Fi CC31xx 및 CC32xx 장치에는 온칩 Wi-Fi, 인터넷 및 (...)
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 임베디드 프로그래밍
임베디드 CC3120/CC3220 장치가 탑재된 각 제품에는 직렬 플래시 장치도 연결되어 있어야 합니다. 직렬 플래시는 포맷되어야 하며, 최소한 필요한 소프트웨어 업데이트와 추가 기능이 포함된 서비스 팩으로 프로그래밍되어야 합니다. CC3220의 경우 내부 MCU 프로세서에서 실행되는 이진 이미지도 프로그래밍되어해야 합니다. 직렬 플래시 프로그래밍에는 다음과 같은 몇 가지 기존 옵션이 있습니다:
- Uniflash – 이미지 생성 및 프로그래밍을 제공하는 PC 기반 유틸리티입니다. 콘텐츠는 UART를 통해 프로그래밍됩니다.
- 무선 (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
SIMPLELINK-CC32XX-REPORTS — Reports: CC32xx Regulatory Certification
CC3XXX 인증 지원을 찾고 계십니까? SIMPLELINK-CC3XXX-CERTIFCATION은 CC31XX, CC32XX 및 CC33XX 제품의 성공적인 인증을 위한 관련 정보와 지원을 제공합니다. 이 페이지에서는 칩 다운 솔루션을 사용한 설계를 위한 TI의 모듈에 대한 최신 인증 보고서와 평가 보드를 확인할 수 있습니다.
SWRR177 — CC3x00 Design Checklist
TIDA-00375 — 24VAC 전원을 지원하는 UART-Wi-Fi 브리지 레퍼런스 디자인
This reference design uses our SimpleLink Wi-Fi CC3200 internet-on-a-chip wireless MCU module to create a data bridge between existing hardware with a logic-level UART interface and a Wi-Fi network. The design also contains a simple switcher power supply with a wide-input range suitable (...)
TIDA-00485 — 24VAC 전원을 지원하는 비절연 RS-485-와이파이 브리지 레퍼런스 디자인
TIDA-00485 uses our SimpleLink Wi-Fi CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi® network. The SN65HVD72 transceiver provides the RS-485 interface with 12 kV of ESD protection and additional protection is provided on board. (...)
TIDA-00486 — 24VAC 전원을 지원하는 절연 RS-485-WiFi 브리지 레퍼런스 디자인
TIDA-00486 uses our SimpleLink Wi-Fi® CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. The ISO15 transceiver provides an isolated RS-485 interface with up to 2500 VRMS of isolation. The LM5160 Fly-Buck™ power supply (...)
TIDC-CC3200-VIDEO — Wi-Fi를 통한 SimpleLink™ CC32xx-OV788 비디오/오디오 스트리밍 레퍼런스 디자인
TIDC-CC3200AUDBOOST — SimpleLink Wi-Fi CC3200용 Wi-Fi 오디오 스트리밍 애플리케이션 Launchpad
This SimpleLink Wi-Fi CC3200 LaunchPad and Audio BoosterPack design brings Wi-Fi audio streaming capability to new applications as well as existing ones such as HD digital speakers. It enables the capture, streaming and playback of audio from a digital microphone or a stereo/mono audio jack to (...)
TIDC-CC3200MODLAUNCHXL — SimpleLink™ Wi-Fi® CC3200 모듈 런치패드
CC3200MODLAUNCHXL은 CC3200MOD를 호스팅하는 저비용 평가 플랫폼입니다. SimpleLink™ CC3200MOD 는 ARM® Cortex™-M4 기반 MCU를 통합하는 무선 MCU(마이크로컨트롤러) 모듈로, 고객이 단일 장치를 사용하여 전체 애플리케이션을 개발할 수 있도록 합니다. 또한 모듈 LaunchPad는 프로그래밍 가능한 사용자 버튼, 맞춤형 애플리케이션을 위한 RGB LED, 온도 및 가속도계 센서, 디버깅을 위한 온보드 에뮬레이션을 제공합니다. LaunchPad 적층형 헤더 (...)
TIDC-CC3ANTENNA-SELECTION — SimpleLink Wi-Fi 안테나 선택
The SimpleLink™ Wi-Fi® Antenna BoosterPack (CC3ANTENNABOOST) enables evaluation and development of end applications requiring antenna diversity. When used with the SimpleLink Wi-Fi CC3200 Launchpad (CC3200-LAUNCHXL) or the CC3100 Boosterpack (CC3100BOOST) rev 3.1 or higher, the user can select the (...)
TIDC-SMARTPLUG-WIFI — 원격 커넥티비티 해지 및 Wi-Fi 커넥티비티를 사용한 스마트 플러그
이 디자인은 원격 연결/연결 해지 기능과 Wi-Fi 커넥티비티를 통해 단일 콘센트의 에너지 측정을 구현합니다. 설계자는 산업용 건물 및 홈 자동화 애플리케이션을 위한 네트워크 연결된 부하 제어 장치를 빠르게 만들 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| QFM (MOB) | 63 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.