DAC8811
- ±0.5 LSB DNL
- 16-Bit Monotonic
- ±1 LSB INL
- Low Noise: 12 nV/√Hz
- Low Power: IDD = 2 µA
- 2.7-V to 5.5-V Analog Power Supply
- 2-mA Full-Scale Current ±20%,
with VREF = 10 V - 50-MHz Serial Interface
- 0.5-μs Settling Time
- 4-Quadrant Multiplying Reference
- Reference Bandwidth: 10 MHz
- ±10-V Reference Input
- Reference Dynamics: –105 THD
- Tiny 8-Lead 3 × 3 mm VSON and 3 × 5 mm VSSOP Packages
- Industry-Standard Pin Configuration
All trademarks are the property of their respective owners.
The DAC8811 multiplying digital-to-analog converter (DAC) is designed to operate from a single 2.7-V to 5.5-V supply.
The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external I-to-V precision amplifier.
A serial data interface offers high-speed, three-wire microcontroller-compatible inputs using data-in (SDI), clock (CLK), and chip-select (CS).
On power-up, the DAC register is filled with zeroes, and the DAC output is at zero scale.
The DAC8811 is packaged in space-saving 8-lead VSON and VSSOP packages.
For all available packages, see the orderable addendum at the end of the datasheet.관심 가지실만한 유사 제품
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DAC8811 16-Bit, Serial Input Multiplying Digital-to-Analog Converter datasheet (Rev. D) | PDF | HTML | 2016. 2. 15 | |
| Circuit design | High-current voltage output circuit using a precision DAC (Rev. A) | PDF | HTML | 2024. 9. 19 | ||
| 인증서 | DAC8811EVM EU Declaration of Conformity (DoC) (Rev. A) | 2023. 6. 6 | |||
| 애플리케이션 노트 | Topology and Noise Using Multiplying DACs (Rev. A) | 2015. 5. 18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DAC8811EVM — DAC8811 평가 모듈
DAC8811EVM 평가 모듈(EVM)은 전류 출력부가 있으며 사용이 간편하고 정확한 저전력 16비트 멀티플라잉 DAC(디지털-아날로그 컨버터)인 DAC8811 제품용 플랫폼입니다. 이 디바이스는 고속 3선 SPI 인터페이스를 지원합니다.
DAC8811EVM-PDK — DAC8811 성능 데모 키트
The DAC8811EVM-PDK is a complete evaluation/demonstration kit, which combines an DAC8811EVM with the TMS32VC5509 based MMB0 motherboard for use with a personal computer. The MMB0 motherboard allows the DAC8811EVM to connect to a computer via a USB port. The DAC8811EVM-PDK is controlled by the DXP (...)
DXP — DXP EVM GUI
DXP(DAC 연습 프로그램)는 값비싼 패턴 생성기를 사용하거나 복잡한 소프트웨어를 작성할 필요 없이 DAC를 평가하는 텍사스 인스트루먼트의 소프트웨어 툴입니다. 텍사스 인스트루먼트의 DAC EVM 및 모듈식 마더보드와 함께 사용할 경우, DAC가 측정 및 평가 목적으로 아날로그 출력을 생성할 수 있는 간단하고 쉬운 디지털 신호 생성을 지원합니다.
SLOC057 — ItoVPro Application Software for High Speed Amplifiers Voltage Feedback Devices
TINA-TI Ref Design for High-Current Voltage O/P Circuit Using a Precision DAC
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIPD137 — ±10V 4상한 멀티플라잉 DAC 레퍼런스 디자인
This TI Precision Verified Design provides the theory, component selection, simulation, PCB design, and measurement details for a dual-supply, four-quadrant MDAC solution that can accurately generate output voltages from -10V to +10V. By removing the summing stage, this design also serves as (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
| VSON (DRB) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.