제품 상세 정보

Frequency range 76 - 81 GHz Number of receivers 8 Number of transmitters 8 Edge AI enabled No Interface type CAN-FD, MIPI-CSI2, SPI Operating temperature range (°C) -40 to 125 Power supply solution LP87745-Q1 Rating Catalog
Frequency range 76 - 81 GHz Number of receivers 8 Number of transmitters 8 Edge AI enabled No Interface type CAN-FD, MIPI-CSI2, SPI Operating temperature range (°C) -40 to 125 Power supply solution LP87745-Q1 Rating Catalog
FCCSP (APE) 573 91 mm² (14 mm × 6.5 mm)
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, baseband, and ADC
    • 76-81GHz operation with up to 4.5GHz continuous chirp bandwidth
    • Eight receive channels
    • Eight transmit channels
    • Ultra-accurate chirp engine based on Fractional-N PLL
    • TX power: 13dBm
    • RX noise figure: 11dB
    • Supports P1dB up to -6.5dBm
    • Industry leading 8 transmitter, 8 receiver radar front end with 2.8W power consumption
    • Supports less than 3 µs chirp idle time for excellent max velocity measurements
    • Maximum chirp slope of 266MHz/µs to enable rapid high-bandwidth measurements
    • ADC Sample rate up to 66.67 Msps for exceptional instrumentation range distance
  • Built-in calibration and self-test
    • Built-in firmware (ROM)
    • Self-calibrating system across process and temperature
  • Host interface
    • Control interface with external processor over SPI or I2C interface
    • Data interface with external processor over MIPI D-PHY and CSI2 v1.2
    • Interrupts for Fault Reporting
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation will be available to aid functional safety system design
    • Hardware integrity up to SIL 2 targeted as per IEC61508 standard
  • IWR2188 advanced features
    • Embedded self-monitoring with limited Host processor involvement
    • Option of cascading multiple devices to increase channel count
    • Embedded interference detection capability
  • Power management
    • Built-in LDO Network for enhanced PSRR
    • I/Os support dual voltage 3.3V/1.8V
  • Clock source
    • Supports externally driven clock (square/sine) at 50 MHz or 40 MHz
    • Supports 50 MHz or 40 MHz crystal connection with load capacitors
  • Easy hardware design
    • Production proven innovative Launch on Package (LOP) technology with easy to route launcher positions
    • 0.5mm pitch 14mm × 15mm FCCSP package for easy assembly and low-cost PCB design
    • Small solution size
  • Operating Conditions
    • Junction temp range: –40°C to 125°C
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, baseband, and ADC
    • 76-81GHz operation with up to 4.5GHz continuous chirp bandwidth
    • Eight receive channels
    • Eight transmit channels
    • Ultra-accurate chirp engine based on Fractional-N PLL
    • TX power: 13dBm
    • RX noise figure: 11dB
    • Supports P1dB up to -6.5dBm
    • Industry leading 8 transmitter, 8 receiver radar front end with 2.8W power consumption
    • Supports less than 3 µs chirp idle time for excellent max velocity measurements
    • Maximum chirp slope of 266MHz/µs to enable rapid high-bandwidth measurements
    • ADC Sample rate up to 66.67 Msps for exceptional instrumentation range distance
  • Built-in calibration and self-test
    • Built-in firmware (ROM)
    • Self-calibrating system across process and temperature
  • Host interface
    • Control interface with external processor over SPI or I2C interface
    • Data interface with external processor over MIPI D-PHY and CSI2 v1.2
    • Interrupts for Fault Reporting
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation will be available to aid functional safety system design
    • Hardware integrity up to SIL 2 targeted as per IEC61508 standard
  • IWR2188 advanced features
    • Embedded self-monitoring with limited Host processor involvement
    • Option of cascading multiple devices to increase channel count
    • Embedded interference detection capability
  • Power management
    • Built-in LDO Network for enhanced PSRR
    • I/Os support dual voltage 3.3V/1.8V
  • Clock source
    • Supports externally driven clock (square/sine) at 50 MHz or 40 MHz
    • Supports 50 MHz or 40 MHz crystal connection with load capacitors
  • Easy hardware design
    • Production proven innovative Launch on Package (LOP) technology with easy to route launcher positions
    • 0.5mm pitch 14mm × 15mm FCCSP package for easy assembly and low-cost PCB design
    • Small solution size
  • Operating Conditions
    • Junction temp range: –40°C to 125°C

The IWR2188 device is an integrated single-chip FMCW transceiver capable of operation in the 76GHz to 81GHz band. The device enables unprecedented levels of integration in an extremely small form factor. IWR2188 is designed for low power, self-monitored, ultra-accurate radar systems in the industrial space.

The IWR2188 device is a self-contained FMCW transceiver single-chip device that simplifies the implementation of Industrial Radar sensors in the band of 76GHz to 81GHz. The device is built on TI’s low-power 45nm RFCMOS process, which enables a monolithic implementation of a 8TX, 8RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform device including reference hardware design, software drivers, sample configurations, API guide, and user documentation.

The IWR2188 device is an integrated single-chip FMCW transceiver capable of operation in the 76GHz to 81GHz band. The device enables unprecedented levels of integration in an extremely small form factor. IWR2188 is designed for low power, self-monitored, ultra-accurate radar systems in the industrial space.

The IWR2188 device is a self-contained FMCW transceiver single-chip device that simplifies the implementation of Industrial Radar sensors in the band of 76GHz to 81GHz. The device is built on TI’s low-power 45nm RFCMOS process, which enables a monolithic implementation of a 8TX, 8RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform device including reference hardware design, software drivers, sample configurations, API guide, and user documentation.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 IWR2188 Single Chip 8x8 Cascadable 76-to-81 GHz Transceiver datasheet PDF | HTML 2026. 9. 16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ 통합 개발 환경(IDE)은 TI의 광범위한 CCStudio™ 개발 생태계의 일부로, TI의 마이크로컨트롤러, 프로세서, 무선 연결 장치 및 레이더 센서를 위한 통합 개발 환경입니다. CCStudio IDE는 데스크톱 또는 클라우드 기반 애플리케이션으로 사용할 수 있습니다. 클라우드 버전은 대용량 소프트웨어 다운로드가 필요 없습니다. 또한 이 툴은 Eclipse Theia 프레임워크를 기반으로 구축 되었기 때문에 인터페이스가 VS Code® 사용자에게 매우 친숙합니다. VS Code를 기본으로 사용하려는 경우, (...)

지원되는 제품 및 하드웨어
온라인 교육

RADAR-ACADEMY — mmWave Radar Academy

The Radar Academy is a documentation package intended to provide educational resources related to mmWave radar technology
지원되는 제품 및 하드웨어
시작하기

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
지원되는 제품 및 하드웨어
소프트웨어 프로그래밍 도구

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.

UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.

macOS는 mmWave, AMx, K2G 및 (...)

지원되는 제품 및 하드웨어
지원 소프트웨어

RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools

The Radar Toolbox is a collection of demos, software tools, and documentation designed to assist in the evaluation of TI Radar Devices
지원되는 제품 및 하드웨어
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
FCCSP (APE) 573 Ultra Librarian

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상