LM2743
- Power stage input voltage from 1 V to 16 V
- Control stage input voltage from 3 V to 6 V
- Output voltage adjustable down to 0.6 V
- Power-good flag and shutdown
- Output overvoltage and undervoltage detection
- ±2% Feedback voltage accuracy over temperature
- Low-side adjustable current sensing
- Adjustable soft start
- Tracking and sequencing with shutdown and soft-start pins
- Switching frequency from 50 kHz to 1 MHz
- TSSOP-14 package
- Create a custom design using the LM2743 with the WEBENCH® Power Designer
The LM2743 is a high-speed synchronous buck regulator controller with an accurate feedback voltage accuracy of ±2%. It can provide simple down conversion to output voltages as low as 0.6 V. Though the control sections of the IC are rated for 3 V to 6 V, the driver sections are designed to accept input supply rails as high as 16 V. The use of adaptive non-overlapping MOSFET gate drivers helps avoid potential shoot-through problems while maintaining high efficiency. The IC is designed for the more cost-effective option of driving only N-channel MOSFETs in both the high-side and low-side positions. It senses the low-side switch voltage drop for providing a simple, adjustable current limit.
The fixed-frequency voltage-mode PWM control architecture is adjustable from 50 kHz to 1 MHz with one external resistor. This wide range of switching frequency gives the power supply designer the flexibility to make better tradeoffs between component size, cost and efficiency.
Features include soft start, input undervoltage lockout (UVLO) and Power Good (based on both undervoltage and overvoltage detection). In addition, the shutdown pin of the IC can be used for providing start-up delay, and the soft-start pin can be used for implementing precise tracking, for the purpose of sequencing with respect to an external rail.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM2743 2.2-V to 16-V Input, voltage mode, synchronous buck controller with tracking datasheet (Rev. I) | PDF | HTML | 2019/02/20 |
| User guide | LM2744 Buck Controller Evaluation Module User's Guide (Rev. B) | PDF | HTML | 2022/02/23 | |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Analog Design Journal | Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics | 2016/07/21 | ||
| Application note | AN-1603 LM274X Reference Designs (Rev. C) | 2013/05/01 | ||
| EVM User's guide | AN-1356 LM2743 Evaluation Board (Rev. A) | 2013/04/30 | ||
| EVM User's guide | AN-1640 LM2743-19A Demo Board (Rev. A) | 2013/04/26 | ||
| Application note | Current Limit Foldback Improves Short Circuit Protection in LM274X Family (Rev. B) | 2013/04/23 | ||
| Application note | Optmiz Pwr Cntrlr Dsigns thru Utiliz Freq & Sync, Ext Ref, Trking & Precis EN | 2008/04/24 | ||
| Application note | Power Management Considerations for FPGAs and ASICs | 2007/03/22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM2743EVAL — 저전압 N채널 MOSFET 동기식 벅 레귤레이터 컨트롤러 평가 모듈
LM2743 N-Channel FET Synchronous Buck Regulator Controller for Conversion from 3.3V
PMP30197 — 옵토커플러를 지원하는 5.85W 절연 자체 구동 동기 인버팅 Fly-Buck 부스트 레퍼런스 디자인
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| TSSOP (PW) | 14 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치