이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 TAC5142 미리 보기 Hardware-control stereo audio codec with 100-dB dynamic range ADC, 106-dB dynamic range DAC 10-dB better ADC SNR, 18-dB better DAC SNR, hardware controlled

제품 상세 정보

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface L, R Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 48 Rating Catalog ADC SNR (typ) (dB) 88 DAC SNR (typ) (dB) 92 Operating temperature range (°C) -25 to 85
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface L, R Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 48 Rating Catalog ADC SNR (typ) (dB) 88 DAC SNR (typ) (dB) 92 Operating temperature range (°C) -25 to 85
TSSOP (PW) 16 32 mm² 5 x 6.4
  • 16-Bit Delta-Sigma ADC and DAC
  • Stereo ADC:
    • Single-Ended Voltage Input
    • Anti-Aliasing Filter Included
    • High Performance
    • THD+N: -84 dB
    • SNR: 88 dB
    • Dynamic Range: 88 dB
    • 1/64× Decimation Digital Filter
    • Passband Ripple: ±0.05 dB
    • Stopband Attenuation: -65 dB
    • Digital HPF Included
  • Stereo DAC:
    • Single-Ended Voltage Output
    • Analog LPF and FIR Filter Included
    • High Performance
    • THD+N: -88 dB
    • SNR: 92 dB
    • Dynamic Range: 92 dB
    • 8× Oversampling Digital Filter
    • Passband Ripple: ±0.1 dB
    • Stopband Attenuation: -43 dB
  • Audio Data Format:
    • ADC: 16-bit, Left-Justified
    • DAC: 16-bit, Right-Justified
  • Special Built-In Functions:
    • Digital De-Emphasis: 32, 44.1, 48 kHz
    • ADC/DAC Independent Power Down With Pop-Noise Free Muting
  • Sampling Rate: 8 kHz to 48 kHz
  • System Clock: 256fS, 384fS, 512fS
  • Low Voltage Power Supply:
    • 2.4 V TYP, 2.1 V MIN to 3.6 V MAX
  • Low Power Dissipation:
    • 32 mW at VCC = 2.4 V
  • Package: 16-Pin TSSOP
  • APPLICATIONS
    • Digital Video Camera
    • Portable MD Player
    • Other Portable System

  • 16-Bit Delta-Sigma ADC and DAC
  • Stereo ADC:
    • Single-Ended Voltage Input
    • Anti-Aliasing Filter Included
    • High Performance
    • THD+N: -84 dB
    • SNR: 88 dB
    • Dynamic Range: 88 dB
    • 1/64× Decimation Digital Filter
    • Passband Ripple: ±0.05 dB
    • Stopband Attenuation: -65 dB
    • Digital HPF Included
  • Stereo DAC:
    • Single-Ended Voltage Output
    • Analog LPF and FIR Filter Included
    • High Performance
    • THD+N: -88 dB
    • SNR: 92 dB
    • Dynamic Range: 92 dB
    • 8× Oversampling Digital Filter
    • Passband Ripple: ±0.1 dB
    • Stopband Attenuation: -43 dB
  • Audio Data Format:
    • ADC: 16-bit, Left-Justified
    • DAC: 16-bit, Right-Justified
  • Special Built-In Functions:
    • Digital De-Emphasis: 32, 44.1, 48 kHz
    • ADC/DAC Independent Power Down With Pop-Noise Free Muting
  • Sampling Rate: 8 kHz to 48 kHz
  • System Clock: 256fS, 384fS, 512fS
  • Low Voltage Power Supply:
    • 2.4 V TYP, 2.1 V MIN to 3.6 V MAX
  • Low Power Dissipation:
    • 32 mW at VCC = 2.4 V
  • Package: 16-Pin TSSOP
  • APPLICATIONS
    • Digital Video Camera
    • Portable MD Player
    • Other Portable System

The PCM3008 is a low cost single chip 16-bit stereo audio codec with single-ended analog voltage input and output.

Both ADCs and DACs employ delta-sigma modulation with 64-times oversampling. ADCs include a digital decimation filter and digital high pass filter. DACs include an 8-times oversampling digital interpolation filter, digital de-emphasis filter and pop-noise free muting which works during the power down ON/OFF sequence. The PCM3008 accepts left-justified format for ADC, and right-justified format for DAC. Independent power-down modes for ADC and DAC are provided.

The PCM3008 is suitable for a wide variety of cost-sensitive consumer applications where good performance is required. It is fabricated using a highly advanced CMOS process and is available in a small 16-pin TSSOP package.

The PCM3008 is a low cost single chip 16-bit stereo audio codec with single-ended analog voltage input and output.

Both ADCs and DACs employ delta-sigma modulation with 64-times oversampling. ADCs include a digital decimation filter and digital high pass filter. DACs include an 8-times oversampling digital interpolation filter, digital de-emphasis filter and pop-noise free muting which works during the power down ON/OFF sequence. The PCM3008 accepts left-justified format for ADC, and right-justified format for DAC. Independent power-down modes for ADC and DAC are provided.

The PCM3008 is suitable for a wide variety of cost-sensitive consumer applications where good performance is required. It is fabricated using a highly advanced CMOS process and is available in a small 16-pin TSSOP package.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV320AIC3206 활성 DirectPath™ HP 증폭기를 지원하는 초저전력 스테레오 코덱 Newer generation device

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기7
유형 직함 날짜
* Data sheet Low Power and Low Voltage 16-Bit, Single-Ended Analog Input/Output Stereo Audio datasheet 2001/04/24
Application note Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019/12/31
Application note Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019/06/27
Application note Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013/10/28
Application note Audio Serial Interface Configurations for Audio Codecs 2010/09/22
Application note Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009/10/30
Application note Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009/07/08

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

드라이버 또는 라이브러리

PCM3008SW-LINUX — PCM3008용 Linux 드라이버

The Linux driver supports the PCM3008 stereo CODEC, communication through GPIO and registers with the ASOC framework of the Linux kernel.
Linux main line status

Available in Linux main line: Yes
Available through git.ti.com: N/A

Linux source files

The files associated with this device are:

  1. (...)
시뮬레이션 모델

PCM3008T IBIS Model

SLAC202.ZIP (20 KB) - IBIS Model
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
TSSOP (PW) 16 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상