PCM6020-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C ≤ TA ≤ +125°C
- ADC performance:
- Line differential input dynamic range: 110 dB
- Microphone differential input dynamic range: 110 dB
- THD+N: –94 dB
- Channel summing mode supports high SNR
- ADC input voltage:
- Differential, 10-VRMS full-scale inputs
- Single-ended, 5-VRMS full-scale inputs
- ADC sample rate (fS) = 8 kHz to 768 kHz
- Programmable channel settings:
- Channel gain: 0 dB to 42 dB, 1-dB steps
- Digital volume control: –100 dB to 27 dB
- Gain calibration with 0.1-dB resolution
- Phase calibration with 163-ns resolution
- Programmable microphone bias (5 V to 9 V):
- With integrated efficient boost converter
- Programmable microphone input fault diagnostics:
- Open inputs or shorted inputs
- Short to ground, MICBIAS, or VBAT
- Microphone bias over current protection
- Low-latency signal processing filter selection
- Programmable HPF and biquad digital filters
- I2C or SPI controls
- Audio serial data interface:
- Format: TDM, I2S, or left-justified (LJ)
- Word length: 16 bits, 20 bits, 24 bits, or 32 bits
- Master or slave interface
- Single-supply, 3.3-V operation
- I/O supply operation: 3.3 V or 1.8 V
- Power consumption:
- < 21.5 mW/channel at 48-kHz
The PCM6020-Q1 is a 2-channel high-performance, audio analog-to-digital converter (ADC) that supports analog input signals up to 10 VRMS. The PCM6020-Q1 supports line and microphone inputs, and allows for both single-ended and differential input configurations. This device offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The PCM6020-Q1 integrates an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3-V supply, which is a readily available supply in the system to generate the high-voltage, programmable microphone bias. The PCM6020-Q1 integrates the programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The PCM6020-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. These integrated high-performance features, along with a single, 3.3-V supply operation, make the PCM6020-Q1 device along with PCM6xx0-Q1 device family an excellent choice for scalable, space-constrained automotive systems. The PCM6020-Q1 is part of a larger PCM6xx0-Q1 device family, available for download at ti.com.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | PCM6020-Q1 Automotive, 2-Channel, 768-kHz, Audio ADC With Integrated Microphone Bias and Input Fault Diagnostics datasheet | PDF | HTML | 2019. 12. 16 | |
| 애플리케이션 노트 | PCM6xx0-Q1 Power Consumption Matrix Across Various Usage Scenario (Rev. A) | PDF | HTML | 2021. 9. 21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development
PurePath™ 콘솔은 오디오 제품의 개발과 관련된 평가, 구성 및 디버그 프로세스를 간소화할 수 있도록 특별히 설계된, 고집적의 사용이 편리한 오디오 개발 제품군입니다. PurePath™ 콘솔 3 소프트웨어를 쉽게 사용하는 방법을 시청해 보세요.
PurePath 콘솔의 직관적인 그래픽 인터페이스는 고급 오디오 엔지니어링 전문 지식이 필요하지 않으므로 오디오 설계를 간단하게 만듭니다. 제품 개발 시간을 단축하는 간편한 그래픽 인터페이스에 구현된 PurePath 콘솔의 여러 고급 제어 기능을 통해 고도로 최적화된 오디오 성능, 최소 (...)| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTV) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.