제품 상세 정보

Technology family HC Function Digital Multiplexer Configuration 2:1 Number of channels 4 Operating temperature range (°C) -40 to 85 Rating Catalog
Technology family HC Function Digital Multiplexer Configuration 2:1 Number of channels 4 Operating temperature range (°C) -40 to 85 Rating Catalog
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm) SOIC (D) 16 59.4 mm² (9.9 mm × 6 mm) SOP (NS) 16 79.56 mm² (10.2 mm × 7.8 mm) PDIP (N) 16 181.42 mm² (19.3 mm × 9.4 mm)
  • Wide operating voltage range of 2 V to 6 V
  • High-current inverting outputs can drive up to 15 LSTTL loads
  • Low power consumption, 80-µA max ICC
  • ’HC257 typical tpd = 9 ns
  • ’HC258 typical tpd = 12 ns
  • ±6-mA output drive at 5 V
  • Low input current of 1 µA max
  • Provides bus interface from multiple sources in high-performance systems
  • Wide operating voltage range of 2 V to 6 V
  • High-current inverting outputs can drive up to 15 LSTTL loads
  • Low power consumption, 80-µA max ICC
  • ’HC257 typical tpd = 9 ns
  • ’HC258 typical tpd = 12 ns
  • ±6-mA output drive at 5 V
  • Low input current of 1 µA max
  • Provides bus interface from multiple sources in high-performance systems

The SNx4HC257 and ’258 contain four data selectors/ multiplexers to select one of two data sources. All channels are controlled by the same address select (A/B) input, and active-low strobe (G) input. A high level at the G terminal forces all outputs into the high-impedance state. The ’257 has non-inverted outputs and the ’258 has inverted outputs.

The SNx4HC257 and ’258 contain four data selectors/ multiplexers to select one of two data sources. All channels are controlled by the same address select (A/B) input, and active-low strobe (G) input. A high level at the G terminal forces all outputs into the high-impedance state. The ’257 has non-inverted outputs and the ’258 has inverted outputs.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
SN74LVC158A 활성 인버팅 출력을 지원하는 쿼드러플 2라인-1라인 데이터 선택기/멀티플렉서 Voltage range 1.65V to 3.6V, average propagation delay 5.5ns, average drive strength 24mA
SN74LVC258A 활성 인버팅 3상 출력을 지원하는 쿼드러플 2라인-1라인 데이터 선택기 및 멀티플렉서 Voltage range 1.65V to 3.6V, average propagation delay 5.5ns, average drive strength 24mA
CD74AC257 활성 3상 출력을 지원하는 쿼드 2입력 비인버팅 멀티플렉서 Voltage range 2V to 6V, average propagation delay 7ns, average drive strength 24mA
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
SN74AHC257 활성 3상태 출력을 지원하는 쿼드러플 2라인-1라인 데이터 선택기/멀티플렉서 Voltage range 2V to 5.5V, average propagation delay 12ns, average drive strength 9mA

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 SN54HC257, SN54HC258, SN74HC257, SN74HC258 datasheet (Rev. C) 1982. 12. 1

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

14-24-LOGIC-EVM — 14핀~24핀 D, DB, DGV, DW, DYY, NS 및 PW 패키지용 로직 제품 일반 평가 모듈

14-24-LOGIC-EVM 평가 모듈(EVM)은 14핀~24핀 D, DW, DB, NS, PW, DYY 또는 DGV 패키지에 있는 모든 로직 장치를 지원하도록 설계되었습니다.

사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
패키지 CAD 기호, 풋프린트 및 3D 모델
TSSOP (PW) 16 Ultra Librarian
SOIC (D) 16 Ultra Librarian
SOP (NS) 16 Ultra Librarian
PDIP (N) 16 Ultra Librarian

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상