제품 상세 정보

Type Omnipolar switch, Unipolar switch Supply current (µA) 0.405, 0.44, 0.79, 0.944 Bandwidth (kHz) 0.00125, 0.005, 0.01, 0.02 Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125 Output Push-Pull output driver
Type Omnipolar switch, Unipolar switch Supply current (µA) 0.405, 0.44, 0.79, 0.944 Bandwidth (kHz) 0.00125, 0.005, 0.01, 0.02 Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125 Output Push-Pull output driver
SOT-23 (DBV) 3 8.12 mm² 2.9 x 2.8 X1LGA (ZFC) 4 1.17 mm² 1.3 x 0.9
  • Supply range: 1.65V to 5.5V
  • Operating temperature range: –40°C to 125°C
  • In-plane axis of sensitivity
  • Integrated magnetic concentrator
  • Magnetic pole detection options:
    • Omnipolar
    • Dual-unipolar
  • Output type:
    • Push-pull
    • Open-drain
  • Available in both active low and active high
  • Magnetic operate points (BOP)
    • 0.9mT
    • 1.0mT
    • 1.3mT
    • 1.5mT
    • 2mT
  • Low average current consumption ICCAVG
    • 1.25Hz: 0.5µA
    • 5Hz: 0.6µA
    • 10Hz: 0.9µA
    • 20Hz: 1.4µA
  • Industry standard package and pinout
    • SOT-23 (DBV)
    • X1LGA (ZFC)
  • Supply range: 1.65V to 5.5V
  • Operating temperature range: –40°C to 125°C
  • In-plane axis of sensitivity
  • Integrated magnetic concentrator
  • Magnetic pole detection options:
    • Omnipolar
    • Dual-unipolar
  • Output type:
    • Push-pull
    • Open-drain
  • Available in both active low and active high
  • Magnetic operate points (BOP)
    • 0.9mT
    • 1.0mT
    • 1.3mT
    • 1.5mT
    • 2mT
  • Low average current consumption ICCAVG
    • 1.25Hz: 0.5µA
    • 5Hz: 0.6µA
    • 10Hz: 0.9µA
    • 20Hz: 1.4µA
  • Industry standard package and pinout
    • SOT-23 (DBV)
    • X1LGA (ZFC)

The TMAG5134 is a high sensitivity, low power, in-plane hall effect digital switch designed to replace TMR, AMR and Reed switches. The TMAG5134 features an integrated magnetic concentrator to achieve higher sensitivity and lower power consumption than traditional hall effect devices.

The TMAG5134 product family is available in packages with either a single omni-polar output (SOT-23) or with two independent unipolar outputs (X1LGA). The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.

To minimize power consumption, the TMAG5134 is internally duty-cycled. The device has a push-pull (CMOS) output which eliminates the need for an external pullup resistor, and is available in industry standard SOT-23 and X1LGA packages. The TMAG5134 is also available in an open-drain configuration.

The TMAG5134 is a high sensitivity, low power, in-plane hall effect digital switch designed to replace TMR, AMR and Reed switches. The TMAG5134 features an integrated magnetic concentrator to achieve higher sensitivity and lower power consumption than traditional hall effect devices.

The TMAG5134 product family is available in packages with either a single omni-polar output (SOT-23) or with two independent unipolar outputs (X1LGA). The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.

To minimize power consumption, the TMAG5134 is internally duty-cycled. The device has a push-pull (CMOS) output which eliminates the need for an external pullup resistor, and is available in industry standard SOT-23 and X1LGA packages. The TMAG5134 is also available in an open-drain configuration.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TMAG5134 High Sensitivity, In-Plane Hall-Effect Switch With Concentrator datasheet (Rev. E) PDF | HTML 2026/02/05
Technical article 홀 효과: 평면 내 스위치가 감도를 높이고 설계 비용을 절감하는 비결 PDF | HTML 2025/09/05
Application note Replacing Reed and Magnetoresistive Switches With Cost-Effective, Low-Power Hall-Effect Switches (Rev. B) PDF | HTML 2025/08/05
Application brief Benefits of Hall-Effect Sensors in Contact Sensors (Rev. B) PDF | HTML 2025/07/22
Application brief How Hall-Effect Sensors are Used in Electronic Smart Locks (Rev. B) PDF | HTML 2025/07/22
Application note Position Sensing in Electronic Smart Locks Using Hall-Effect Sensors (Rev. B) PDF | HTML 2025/07/22
Certificate TMAG5134EVM EU Declaration of Conformity (DoC) 2025/07/01

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

HALL-ADAPTER-EVM — 홀 센서 분리 어댑터 평가 모듈

HALL-ADAPTER-EVM을 사용하면 소형 IC와 빠르고 간편하며 저렴한 방식으로 인터페이스할 수 있어 스위치, 래치 및 선형 홀 센서 프로토타입 제작과 테스트 속도가 빨라집니다. 제품에 포함된 Samtec 터미널 스트립을 사용하여 지원되는 홀 센서를 연결하거나 기존 회로에 직접 연결할 수 있습니다. 지원되는 패키지의 전체 목록에는 SOT-23, TO-92, X2SON, SOT-23-5/6, 0.4mm 피치의 2x2 WCSP 및 MSOP-8이 포함됩니다.
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
평가 보드

TMAG5134EVM — TMAG5134 평가 모듈

TMAG5134EVM은 TMAG5134 홀 효과 스위치로 평가하거나 프로토타이핑할 수 있는 사용하기 쉬운 플랫폼을 제공합니다. 이 평가 모듈(EVM)에는 TMAG5134EVM 외에 자석 1개가 포함되어 있습니다.
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
시뮬레이션 툴

TI-MAGNETIC-SENSE-SIMULATOR TI Magnetic sensing simulation tool

The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23 (DBV) 3 Ultra Librarian
X1LGA (ZFC) 4 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상