TPL1401
-
256-position digital potentiometer for voltage-divider applications
- 1 LSB INL and DNL
- Wide operating range
- Power supply: 1.8 V to 5.5 V
- Temperature range: –40°C to +125°C
- Buffered wiper for improved load regulation
- FB pin for precision current sink applications
- Wiper lock function to protect from accidental writes to the digital potentiometer
- I2C interface
- Standard, fast, and fast plus modes
- 1.62-V VIH with VDD = 5.5 V
- User-programmable nonvolatile memory (NVM/EEPROM)
- Save and recall all register settings
- Internal reference
- Very low power: 0.2 mA at 1.8 V
- Flexible startup: High impedance or 10K-GND
- Tiny package: 8-pin WSON (2 mm × 2 mm)
The TPL1401 is a digital potentiometer (digipot) with a buffered wiper. Unlike standard digipots, this device offers higher load regulation in voltage-divider applications as a result of the integrated buffered wiper.
The TPL1401 makes in-factory calibration and trimming easier with integrated nonvolatile memory (NVM), and a simple I2C digital interface to communicate with the device. This device supports I2C standard mode (100 kbps), fast mode (400 kbps), and fast mode plus (1 Mbps).
The TPL1401 operates with either the internal reference or with the power supply as the reference, and provides a full-scale output of 1.8 V to 5.5 V. This device also includes a wiper lock feature, a feedback (FB) pin for current-sink applications, and two bytes of user-programmable NVM space. The TPL1401 has a power-on-reset (POR) circuit that makes sure all the registers start with default or user-programmed settings using NVM. The digipot output powers on in high-impedance mode (default); this setting can be programmed to 10kΩ-GND using NVM.
The TPL1401 is tiny, feature rich, and an easy-to-use building block device that can be integrated into many applications.
The TPL1401 operates within the temperature range of –40°C to +125°C.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPL1401 256-Tap, High-Accuracy, Digital Potentiometer With Buffered Wiper datasheet | PDF | HTML | 2020/09/16 |
| Circuit design | Microphone Sensitivity Adjustments Using TPL1401 | PDF | HTML | 2021/04/27 | |
| Circuit design | Programmable comparator circuit with buffered digital potentiometer | PDF | HTML | 2021/04/19 | |
| More literature | New TI smart analog and smart DAC adds intelligence to analog without soft | 2020/12/15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPL1401EVM — 버퍼링된 와이퍼를 지원하는 TPL1401 256탭 고정밀 디지털 전위차계 평가 모듈
TPL1401 평가 모듈(EVM)은 TPL1401 제품의 기능 및 성능 평가를 위한 플랫폼으로 사용이 간편합니다. TPL1401은 버퍼 전압 출력 디지털 전위차계(DPOT)입니다. 이 제품에는 비휘발성 메모리(NVM), 내부 레퍼런스 및 I2C 인터페이스가 있습니다.
TPL1401은 내부 레퍼런스 또는 전원 공급 장치를 레퍼런스로 사용하여 작동하며, 1.8V~5.5V의 풀 스케일 출력을 제공합니다. 이 장치는 I2C 인터페이스를 통해 통신합니다. I2C 표준 모드(100kbps), 고속 모드(400kbps), 고속 모드 (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DSG) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.