ADS1220
- Low current consumption:
- As low as 120µA (typ) in duty-cycle mode
- Wide supply range: 2.3V to 5.5V
- Programmable gain: 1 to 128
- Programmable data rates: Up to 2kSPS
- Up to 20 Bits effective resolution
- Simultaneous 50Hz and 60Hz rejection at 20SPS with single-cycle settling digital filter
- Two differential or four single-ended inputs
- Dual-matched programmable current
sources:
- 10µA to 1.5mA
- Internal 2.048V reference: 5ppm/°C (typ) drift
- Internal 2% accurate oscillator
- Internal temperature sensor:
- 0.5°C (typ) accuracy
- SPI-compatible interface (mode 1)
The ADS1220 is a precision, 24-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications measuring small sensor signals. The device features two differential or four single-ended inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), two programmable excitation current sources, a voltage reference, an oscillator, a low-side switch, and a precision temperature sensor.
The device can perform conversions at data rates up to 2000 samples-per-second (SPS) with single-cycle settling. At 20SPS, the digital filter offers simultaneous 50Hz and 60Hz rejection for noisy industrial applications. The internal PGA offers gains up to 128. This PGA makes the ADS1220 designed for applications measuring small sensor signals, such as resistance temperature detectors (RTDs), thermocouples, thermistors, and resistive bridge sensors. The device supports measurements of pseudo- or fully-differential signals when using the PGA. Alternatively, the device can be configured to bypass the internal PGA while still providing high input impedance and gains up to 4, allowing for single-ended measurements.
Power consumption is as low as 120µA when operating in duty-cycle mode with the PGA disabled. The ADS1220 is offered in a leadless VQFN-16 or a TSSOP-16 package and is specified over a temperature range of –40°C to +125°C.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS1220EVM — ADS1220 評估模組
The ADS1220EVM is an evaluation system for the ADS1220, a 24-bit, multi-channel, delta-sigma (ΔΣ) analog-to-digital converter (ADC). The EVM uses the ADS1220 along with minimal circuitry to demonstrate functionality for prototyping and part evaluation. The pins of the ADS1220 are (...)
PLABS-SAR-EVM-PDK — TI Precision Labs SAR ADC 評估模組性能展示套件 (PDK)
PLABS-SAR-EVM-PDK 是一款實驗平台,需與 TI Precision Labs 影片配合使用,可幫助深入理解 漸近法暫存器 (SAR) 類比轉數位轉換器 (ADC) 電路。此評估模組 (EVM) 平台包含兩個通道的常見 SAR ADC 電路,可輕鬆連接至精密訊號注入器評估模組 (PSIEVM),該模組能提供低失真、低雜訊的輸入訊號來驅動 SAR ADC;第三個通道則設計用於展示超低功耗 ADC 在不同吞吐量下的功耗變化。該 EVM 平台還包含 10 塊可安裝於主機板上的試樣卡,用於展示不同前端驅動電路對性能的影響。
PLABS-SAR-EVM-PDK 使用者指南提供了 EVM (...)
ADC-TEMP-SENSOR-FW — Temperature-sensor firmware source files
這款溫度感測器線性化韌體提供軟體常式來測量和線性化最常用的溫度感測器,包括電阻溫度偵測器 (RTD)、熱電偶、熱敏電阻 (NTC、PTC 等) 與類比溫度感測器。
此軟體包含類比轉數位轉換器 (ADC) 硬體抽象層,可在 ADC 與微處理器 (MCU) 之間進行通訊,並且可將感測器資料轉換並線性化為溫度值的感測器 API,以及展示如何藉由原始碼來使用感測器 (精確 ADC 及 MCU) 讀取溫度的範例。
ADS1220-C-EXAMPLE-CODE — ADS1220 Example Code
ADC-RTD-CONFIG-CALC — RTD Configuration Calculator for Precision ADCs
此電阻溫度偵測器 (RTD) 配置計算機是一套 Microsoft® Excel 工具,可協助使用者為 RTD 應用找出系統解決方案。預設顯示兩線、三線及四線 RTD 配置,並配備適用三線 RTD 的高側或低側參考電阻,及一或兩個整合式數位轉類比轉換器 (IDAC) 電流來源的選項。
此外,計算機支援各種 RTD 類型和精確類比轉數位轉換器 (ADC)。使用此計算器為每個組態選擇參考及偏壓電阻值、IDAC 電流及增益設定。此外,計算機也提供全誤差的一階近似,以幫助使用者找出系統中最大的誤差來源。
ADS1220-EXCEL-CALC — ADS1220 Excel™ calculator
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
許多 TI 參考設計包含 ADS1220
使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RVA) | 16 | Ultra Librarian |
| TSSOP (PW) | 16 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。