ADS122S14
- Low power consumption (as low a 57µA)
- Wide supply voltage range:
- Analog: 1.74V to 3.6V
- Digital: 1.65V to 3.6V
- Programmable gain: 0.5 to 256
- Programmable data rate (up to 64kSPS) and speed mode to trade power consumption and noise performance
- Simultaneous 50Hz and 60Hz rejection at 20 or 25SPS with single-cycle settling digital filter
- Analog multiplexer with 8 independently selectable inputs
- Dual-matched programmable current sources
- Internal programmable voltage reference:1.25V or 2.5V with 25ppm/°C (max) drift
- Internal 1% (max) accurate oscillator
- Internal temperature sensor
- Four general-purpose I/Os (push-pull or open-drain output)
- SPI-compatible interface with optional CRC and daisy-chain capability
The ADS1x2S14 are precision, low-power, 16- and 24-bit, analog-to-digital converters (ADCs) that offer many integrated features to reduce system cost and component count in the most common sensor measurement applications. The devices feature eight analog inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), a programmable low-drift voltage reference, two programmable excitation current sources, an oscillator, and a temperature sensor.
Four speed modes, with programmable output data rates from 20SPS up to 64kSPS, allow to optimize power consumption and noise performance for each application. At output data rates of 20SPS and 25SPS, the integrated digital filter offers simultaneous 50Hz and 60Hz line-cycle rejection with single-cycle settling.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS122S14EVM-PDK — ADS122S14 評估模組
SNSR-DUAL-ADC-EVM — ADS122S14 和 MSPM0G1507 評估模組
ADC-TEMP-SENSOR-FW — Temperature-sensor firmware source files
這款溫度感測器線性化韌體提供軟體常式來測量和線性化最常用的溫度感測器,包括電阻溫度偵測器 (RTD)、熱電偶、熱敏電阻 (NTC、PTC 等) 與類比溫度感測器。
此軟體包含類比轉數位轉換器 (ADC) 硬體抽象層,可在 ADC 與微處理器 (MCU) 之間進行通訊,並且可將感測器資料轉換並線性化為溫度值的感測器 API,以及展示如何藉由原始碼來使用感測器 (精確 ADC 及 MCU) 讀取溫度的範例。
ADS122S14-C-EXAMPLE-CODE — ADS122S14 C code example
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。
TIDA-011026 — 現場發射器平台:三線 4mA 至 20mA 介面參考設計
此參考設計提供 3 線制電壓和電流介面感測器的 4-20mA 介面實作範例。此設計可評估 XTR200 和電流迴路保護器 TPS2661。XTR200 整合了電壓和電流現場發射器通訊介面的輸出驅動電路,支援標準工業訊號電平,如 4-20mA、0-20mA 及 0-10V。此參考設計透過針腳接頭提供對脈衝寬度調變 (PWM) 介面的存取,此介面用於驅動輸出級。此針腳接頭也提供 3.3V 電源來為連接的微控制器供電。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。