ADS1282-SP

現行

產品詳細資料

Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Space Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -55 to 125 Power consumption (typ) (mW) 25 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 130 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Space Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -55 to 125 Power consumption (typ) (mW) 25 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 130 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
CFP (HKV) 28 231.521 mm² (0 mm × 0 mm)
  • QMLV (QML Class V) MIL-PRF-38535 Qualified and Radiation Hardness Assured (RHA), SMD 5962-14231
    • 5962L1423101VXC - Qualified over the Military Temperature Range (–55°C to 125°C)
    • 5962L1423102VXC - Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance
  • 5962L14231:
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 kRAD (Si)
    • Single Event Latchup (SEL) Immune to LET = 50 MeV-cm2/mg at 125°C
    • Single Event Latchup (SEL) Immune to LET = 60 MeV-cm2/mg at 85°C
  • High Resolution: 124-dB SNR (1000 SPS)
  • High Accuracy: THD: –102 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input MUX
  • Inherently-Stable Modulator With Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Filter Bypass Option
  • Low-Power Consumption: 25 mW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.75 to 3.3 V
  • QMLV (QML Class V) MIL-PRF-38535 Qualified and Radiation Hardness Assured (RHA), SMD 5962-14231
    • 5962L1423101VXC - Qualified over the Military Temperature Range (–55°C to 125°C)
    • 5962L1423102VXC - Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance
  • 5962L14231:
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 kRAD (Si)
    • Single Event Latchup (SEL) Immune to LET = 50 MeV-cm2/mg at 125°C
    • Single Event Latchup (SEL) Immune to LET = 60 MeV-cm2/mg at 85°C
  • High Resolution: 124-dB SNR (1000 SPS)
  • High Accuracy: THD: –102 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input MUX
  • Inherently-Stable Modulator With Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Filter Bypass Option
  • Low-Power Consumption: 25 mW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.75 to 3.3 V

The ADS1282-SP is a radiation-tolerant extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). ADS1282-SP is suitable for the demanding needs of space applications providing ultra-precision performance while maintaining radiation tolerance suitable for a large variety of satellites, payloads, sensing and other harsh environment applications.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.

The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to transducers over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.

Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from –55°C to 125°C.

The ADS1282-SP is a radiation-tolerant extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). ADS1282-SP is suitable for the demanding needs of space applications providing ultra-precision performance while maintaining radiation tolerance suitable for a large variety of satellites, payloads, sensing and other harsh environment applications.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.

The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to transducers over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.

Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from –55°C to 125°C.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 18
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ADS1282-SP Radiation Hardness Assured High-Resolution Delta Sigma ADC datasheet (Rev. B) PDF | HTML 2018/10/22
* 輻射及可靠性報告 Single-Event Effects Characterization of TI ADS1282-SP High-Resolution ADC (Rev. A) PDF | HTML 2025/4/23
* 輻射及可靠性報告 ADS1282-SP Total Ionizing Dose (TID) Radiation Report (Rev. A) 2022/5/17
* SMD ADS1282-SP SMD 5962-14231 2016/7/8
應用說明 Space ADC Circuit Cookbook PDF | HTML 2026/5/11
選擇指南 TI Space Products (Rev. L) 2026/3/27
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 2025/6/17
應用說明 Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 2025/6/10
更多文件說明 TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 2025/2/20
應用說明 Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 2024/3/18
應用說明 Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023/3/29
應用說明 Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022/10/19
設計指南 Series Resistance Temperature Detector (RTD) Sensing Reference Design PDF | HTML 2022/9/26
Application brief Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML 2022/3/7
電子書 Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020/6/19
技術文章 7 things to know about spacecraft subsystems before your next trip to Mars PDF | HTML 2016/7/6
使用指南 ADS1282-SP Overview User’s Guide 2016/6/23
使用指南 MSP430FR5969 Launchpad Firmware Flashing Guide for ADS1282-SP 2016/6/15

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發套件

MSP-EXP430FR5969 — MSP430FR5969 LaunchPad™ 開發套件

MSP-EXP430FR5969 LaunchPad 開發套件是適用 MSP430FR5969 MCU 的易用微控制器開發電路板。其包含開始在 MSP430FRxx FRAM 平台上快速開發的一切所需,包括用於編程、偵錯和能源量測的板載模擬。電路板配備板載按鈕及 LED,整合簡單的使用者介面與 SuperCap,實現無需外部電源供應器的獨立應用。MSP430FR5969 微控制器配備嵌入式 FRAM (鐵電隨機存取記憶體),是一種以超低功耗、高耐受度和高速寫入能力聞名的非揮發性記憶體。運用 20 接腳接頭與各種 BoosterPack (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
韌體

SBAC149 — MSP430FR5969 Launchpad Firmware Source for ADS1282-SP

支援產品和硬體
開發模組 (EVM) 的 GUI

SBAC150 — ADS1282-SP EVM GUI Software

支援產品和硬體
支援軟體

ADS1282-C-EXAMPLE-CODE — ADS1282 example C code

Expedite your embedded design using this example C code for the ADS1282
支援產品和硬體
模擬型號

ADS1282-SP IBIS MODEL

SLAM283.ZIP (80 KB) - IBIS 模型
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
參考設計

TIDA-060042 — 串聯電阻溫度偵測器 (RTD) 感測參考設計

TIDA-060042 參考設計展示了使用 ADS1282EVM-PDK 的完整航太級比率式溫度感測電路。此電路可在不使用緩衝器的情況下,測量多達 10 個不同位置的溫度。多數空間應用都需在多個子系統中進行溫度量測,因此可自此多位置電路得到幫助。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
CFP (HKV) 28 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片