產品詳細資料

Applications Avionics & Defense, Communications and Telecom, General purpose, Industrial, Test and Measurement Number of TXs and RXs 4 TX, 4 RX RF frequency (max) (MHz) 40000 RF frequency (min) (MHz) 0 Number of DUCs per TX 4 Number of DDCs per RX 4 Operating temperature range (°C) -40 to 85 Rating Catalog
Applications Avionics & Defense, Communications and Telecom, General purpose, Industrial, Test and Measurement Number of TXs and RXs 4 TX, 4 RX RF frequency (max) (MHz) 40000 RF frequency (min) (MHz) 0 Number of DUCs per TX 4 Number of DDCs per RX 4 Operating temperature range (°C) -40 to 85 Rating Catalog
FCBGA (AQK) 826 576 mm² (24 mm × 24 mm)
  • Request full data sheet
  • Quad RF sampling 32 to 64GSPS DACs and ADCs
  • RF frequency range: DC to >40GHz
  • Sub-ADC core sample rate: 8GSPS
  • Maximum signal bandwidth:
    • 4T4R: 3.2GHz (4GSPS complex)
    • 2T2R: 6.4GHz (8GSPS complex)
  • Input clock: 4 to 8GHz
  • ADC performance
    • Noise floor: -154dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DAC performance
    • NSD (-12dBFS, 16.1GHz): -163dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DSP blocks
    • Multiband DUC/DDC (phase coherent hopping)
    • PFIR equalizer
    • FFT spectrum analyzer
    • Fractional resampler
  • SerDes data interface:
    • JESD204B and JESD204C compatible
    • 16 SerDes transceivers up to 32.5Gbps
    • Subclass 1 multi-device synchronization
  • Supply voltages: 0.9V, 1.2V, and 1.8V
  • Package: 24mm × 24mm FCBGA, 0.8mm pitch
  • Request full data sheet
  • Quad RF sampling 32 to 64GSPS DACs and ADCs
  • RF frequency range: DC to >40GHz
  • Sub-ADC core sample rate: 8GSPS
  • Maximum signal bandwidth:
    • 4T4R: 3.2GHz (4GSPS complex)
    • 2T2R: 6.4GHz (8GSPS complex)
  • Input clock: 4 to 8GHz
  • ADC performance
    • Noise floor: -154dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DAC performance
    • NSD (-12dBFS, 16.1GHz): -163dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DSP blocks
    • Multiband DUC/DDC (phase coherent hopping)
    • PFIR equalizer
    • FFT spectrum analyzer
    • Fractional resampler
  • SerDes data interface:
    • JESD204B and JESD204C compatible
    • 16 SerDes transceivers up to 32.5Gbps
    • Subclass 1 multi-device synchronization
  • Supply voltages: 0.9V, 1.2V, and 1.8V
  • Package: 24mm × 24mm FCBGA, 0.8mm pitch

The AFE34RF90 is a high performance, wide bandwidth multi-channel transceiver, integrating four 64GSPS RF sampling digital-to-analog converters (DAC) and four 64GSPS RF sampling analog-to-digital converters (ADC). With receiver RF bandwidth of 40GHz and transmitter RF bandwidth of 30GHz, this device enables direct RF sampling in the frequency bands up through Ka-band without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 3.2GHz of signal bandwidth for four TX or 6.4GHz for two TX. An advanced digital signal processing block includes a fractional resampler and a PFIR equalizer followed by multiple digital up converters. The output of the DSP block drive a 64GSPS DAC with a mixed mode output option to enhance 2nd Nyquist operation.

Each receiver chain includes a 64GSPS ADC, followed by multiple digital down converters (DDC), PFIR equalizers and a fractional resampler. Each receiver channel has a signal detection and FFT block for spectral analysis that can automatically control the DDC frequency to quickly tune to spectra with interesting signals. The output of the signal processing block can deliver up to 3.2GHz of signal bandwidth for four RX or 6.4GHz for two RX.

The device includes several loopback paths with variable delay and gain, from a super low latency path directly from the ADC to DAC and longer latency paths including frequency translation.

The AFE34RF90 is a high performance, wide bandwidth multi-channel transceiver, integrating four 64GSPS RF sampling digital-to-analog converters (DAC) and four 64GSPS RF sampling analog-to-digital converters (ADC). With receiver RF bandwidth of 40GHz and transmitter RF bandwidth of 30GHz, this device enables direct RF sampling in the frequency bands up through Ka-band without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 3.2GHz of signal bandwidth for four TX or 6.4GHz for two TX. An advanced digital signal processing block includes a fractional resampler and a PFIR equalizer followed by multiple digital up converters. The output of the DSP block drive a 64GSPS DAC with a mixed mode output option to enhance 2nd Nyquist operation.

Each receiver chain includes a 64GSPS ADC, followed by multiple digital down converters (DDC), PFIR equalizers and a fractional resampler. Each receiver channel has a signal detection and FFT block for spectral analysis that can automatically control the DDC frequency to quickly tune to spectra with interesting signals. The output of the signal processing block can deliver up to 3.2GHz of signal bandwidth for four RX or 6.4GHz for two RX.

The device includes several loopback paths with variable delay and gain, from a super low latency path directly from the ADC to DAC and longer latency paths including frequency translation.

下載 觀看有字幕稿的影片 影片

提供 AFE34RF90 系列完整產品規格表及設計資源。立即索取

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 AFE34RF90 Quad Channel 12-Bit 64GSPS RF Sampling AFE datasheet PDF | HTML 2026/6/4

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
FCBGA (AQK) 826 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片