AFE8092
- Octal RF sampling 12GSPS transmit DACs
- Octal RF sampling 3GSPS receive ADCs
- Maximum RF signal bandwidth:
- TX/FB: 800MHz
- 1200MHz in 4-channel mode
- RX: 600MHz
- TX/FB: 800MHz
- RF frequency range: up to 6GHz
- Digital Step Attenuators (DSA):
- TX: 40dB range, 1dB analog and 0.125dB digital steps
- RX/FB: 31/25dB range, 1dB step
- Single DUC/DDC per chain
- Dual NCOs per chain for fast frequency switching
- Supports TDD operation with fast switching between TX and RX
- Internal PLL/VCO to generate DAC/ADC clocks
- Optional external CLK at DAC or ADC rate
- SerDes data interface:
- JESD204B and JESD204C
- 8 SerDes transceivers up to 32.5Gbps
- 8b/10b and 64b/66b Encoding
- 12-bit, 16-bit, 24-bit and 32-bit resolution
- Subclass one multi-device synchronization
- Package:
- 17mm × 17mm FCBGA, 0.8mm pitch
The AFE8092 is a high performance, wide bandwidth multi-channel transceiver, integrating eight RF sampling transmitter chains, eight RF sampling receiver chains and two separate RF front end for the auxiliary chains (feedback paths). The high dynamic range of the transmitter and receiver chains allows generating and receiving 3G, 4G and 5G signals for wireless base stations, and the AFE8092 wide bandwidth capability is designed for multi-band 4G and 5G base stations.
Each receiver chain includes a 31dB range DSA (Digital Step Attenuator), followed by a 3GSPS ADC (analog-to-digital converter). Each receiver channel has analog peak power detectors and digital peak and power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. The digital down converters (DDC) provides up to 800MHz of combined signal BW in 8-channel mode and 800MHz in 4-channel mode. In TDD mode, the receiver channel can be configured to dynamically switching between traffic receiver (TDD RX) and wideband feedback receiver (TDD FB), with the capability of re-using the same analog input for both purposes.
Each transmitter chain includes a digital up converter (DUC) supporting up to 800MHz combined signal bandwidth (1200MHz in 4-channel mode). The output of the DUC drives a 12GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40dB range and 1dB analog and 0.125dB digital steps.
The feedback path includes a 25dB range DSA driving a 3GSPS RF sampling ADC, shared with receiver chain, followed by a DDC with up to 800MHz bandwidth (1200MHz in 4-channel mode).

您可能會感興趣的類似產品
功能與所比較的裝置相似
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | AFE8092 Octal-Channel RF Transceiver with Feedback Paths datasheet (Rev. B) | PDF | HTML | 2024年 11月 6日 |
Application note | RF Sampling Resource Guide | PDF | HTML | 2024年 3月 5日 | |
User guide | Interfacing AFE7769DEVM With the Hitek Agilex eSOM7 FPGA | PDF | HTML | 2023年 9月 28日 | |
Application note | Correcting the External and Internal RF Droop for RF Transmitters | PDF | HTML | 2023年 8月 18日 | |
Application note | Demystifying and Mitigating Power Supply Ripple and Noise Implication on AFE8092 (Rev. B) | PDF | HTML | 2021年 11月 16日 | |
Application note | Temp Profile to Maintain Optimum FIT Performance | 2019年 7月 23日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
HTK-3P-AGILEX-ESOM7 — HITEK Agilex eSOM7 with FMC+ connector to RF transceiver EVMs
The Hitek Systems eSOM7 interfaces with the AFE8092, AFE8030, AFE7952, and AFE7920 through an FPGA mezzanine card (FMC) connector. It provides a quick evaluation and prototyping platform for 5G wireless solutions based on Intel’s latest high-performance 10-nm Agilex F-Series FPGA.
TI204C-IP — Request for JESD204 rapid design IP
The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)
支援產品和硬體
產品
高速 DAC (>10 MSPS)
高速 ADC (≥10 MSPS)
RF 收發器
RF 發射器
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
FCBGA (ABJ) | 400 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。