產品詳細資料

Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 3 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, Solar input/MPPT, USB C/PD compatible Vin (min) (V) 2.6 Vin (max) (V) 5.5 Absolute max Vin (max) (V) 7.5 Control topology Switch-Mode Buck-boost Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.8 Control interface I2C Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 3 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, Solar input/MPPT, USB C/PD compatible Vin (min) (V) 2.6 Vin (max) (V) 5.5 Absolute max Vin (max) (V) 7.5 Control topology Switch-Mode Buck-boost Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.8 Control interface I2C Operating temperature range (°C) -40 to 85
DSBGA (YBG) 16 2.486929 mm² (1.577 mm × 1.577 mm)
  • High-efficiency 3A synchronous buck-boost charger for single cell battery

    • Seamless automatic transition between Buck, Buck-Boost, and Boost operation
    • Charge current up to 3A in 20mA steps
    • Charge termination from 20 to 1000mA in 5mA steps
    • Flexible JEITA profile for safe charging over temperature and high configurability
    • Selectable switching frequency between 1MHz and 2MHz
  • >95% peak efficiency
    • 95.9% efficiency when VBUS = 4.2V, VBAT = 3.6V, ICHG = 1A
    • 94.8% efficiency when VBUS = 4.2V, VBAT = 3.6V, ICHG = 2A
  • NVDC power path management with high efficiency 15mΩ BATFET
    • System instant-on with depleted or no battery
    • Battery supplement when adapter is fully loaded
  • 2.5V to 5.5V input voltage range
  • Programmable VINDPM
    • 2.48 to 5V in 40mV steps
  • BATFET control to support shutdown mode, standby mode, and full system reset
  • Ultra low IQ
    • 2.5µA in battery-only mode
    • 0.16µA in shutdown mode
    • 0.6µA in standby mode
  • High accuracy voltage/current regulation
    • ±0.4% charge voltage regulation
    • ±5% charge current regulation
  • Safety
    • Thermal regulation and thermal shutdown
    • Input, system, battery overvoltage protection
    • Battery, converter overcurrent protection
    • Charging safety timer
  • High-efficiency 3A synchronous buck-boost charger for single cell battery

    • Seamless automatic transition between Buck, Buck-Boost, and Boost operation
    • Charge current up to 3A in 20mA steps
    • Charge termination from 20 to 1000mA in 5mA steps
    • Flexible JEITA profile for safe charging over temperature and high configurability
    • Selectable switching frequency between 1MHz and 2MHz
  • >95% peak efficiency
    • 95.9% efficiency when VBUS = 4.2V, VBAT = 3.6V, ICHG = 1A
    • 94.8% efficiency when VBUS = 4.2V, VBAT = 3.6V, ICHG = 2A
  • NVDC power path management with high efficiency 15mΩ BATFET
    • System instant-on with depleted or no battery
    • Battery supplement when adapter is fully loaded
  • 2.5V to 5.5V input voltage range
  • Programmable VINDPM
    • 2.48 to 5V in 40mV steps
  • BATFET control to support shutdown mode, standby mode, and full system reset
  • Ultra low IQ
    • 2.5µA in battery-only mode
    • 0.16µA in shutdown mode
    • 0.6µA in standby mode
  • High accuracy voltage/current regulation
    • ±0.4% charge voltage regulation
    • ±5% charge current regulation
  • Safety
    • Thermal regulation and thermal shutdown
    • Input, system, battery overvoltage protection
    • Battery, converter overcurrent protection
    • Charging safety timer

BQ25350 is a highly-integrated 3A switch-mode battery charge management and system power-path management device for single cell Li-Ion and Li-polymer batteries. It provides high efficiency charging with a small solution size and low component count. BQ25350 operates over a 2.5V to 5.5V input range with seamless transition between Buck, Buck-Boost, and Boost modes. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. BQ25350 provides critical charging safety protections including battery temperature monitoring, charging safety timers, over-voltage and over-current protections. Charging and safety settings are highly configurable via the I2C serial bus, making BQ25350 a truly flexible solution.

BQ25350 is a highly-integrated 3A switch-mode battery charge management and system power-path management device for single cell Li-Ion and Li-polymer batteries. It provides high efficiency charging with a small solution size and low component count. BQ25350 operates over a 2.5V to 5.5V input range with seamless transition between Buck, Buck-Boost, and Boost modes. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. BQ25350 provides critical charging safety protections including battery temperature monitoring, charging safety timers, over-voltage and over-current protections. Charging and safety settings are highly configurable via the I2C serial bus, making BQ25350 a truly flexible solution.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 BQ25350 I2 C Controlled, 3A, Single Cell Integrated Buck-Boost Charger with NVDC Power Path Management datasheet (Rev. A) PDF | HTML 2026/10/9

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ25350EVM — BQ25350 evaluation module

The BQ25350 evaluation module (EVM) is a complete evaluation system for the BQ25350 integrated circuit, a buck-boost single-cell battery charger with an input range of 2.5V to 5.5V and NVDC power path management. The BQ25350EVM has a maximum input of 5.5V and a maximum charge current of 3A.
使用指南: PDF | HTML
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YBG) 16 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片