BUF18830
- 10-BIT RESOLUTION
- 18-CHANNEL P-GAMMA:
- 300-mV Min Swing-to-Rail (10 mA)
- TWO-CHANNEL P-VCOM:
- 400-mA Typical IOUT
- HIGH SLEW RATE VCOM: 45 V/µs
- RAIL-TO-RAIL OUTPUT
- LOW SUPPLY CURRENT
- SUPPLY VOLTAGE: 6.5 V to 20 V
- DIGITAL SUPPLY: 2.0 V to 5.5 V
- TWO-WIRE INTERFACE: Supports 400 kHz and 3.4 MHz
The BUF18830 offers 18 programmable gamma channels and two programmable VCOM channels.
All gamma and VCOM channels offer a rail-to-rail output that typically swings to within 300 mV of either supply rail with a 10-mA load. All channels are programmed using a two-wire interface that supports standard operations up to 400 kHz and high-speed data transfers up to 3.4 MHz.
The BUF18830 is manufactured using Texas Instruments’ proprietary, state-of-the-art, high-voltage CMOS process. This process offers very dense logic and high supply voltage operation of up to 20 V. The BUF18830 is offered in a QFN-38 package and is specified from –40°C to +85°C.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | Programmable Gamma-Voltage Generator w/Two High Slew Rate VCOMs datasheet (Rev. A) | 2011年 6月 24日 | |
| EVM User's guide | BUF18830EVM User Guide and Software Tutorial (Rev. A) | 2016年 5月 31日 | ||
| Application note | Driving Capacitive Loads with Gamma Buffers | 2012年 11月 20日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGF) | 38 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。