CC2480A1
- Simple integration of ZigBee into any design
- Running the mature and stable ZigBee 2006 compliant TI Z-Stack
- SPI or UART interface to any microcontroller running the application
- Simple API and full ZigBee API supported
- Can implement any type of ZigBee device: Coordinator, Router or End Device
- Automatically enters low power mode (<0.5 µA) in idle periods when configured as End Device
- Radio
- Fully integrated and robust IEEE 802.15.4-compliant 2.4 GHz DSSS RF transceiver
- Excellent receiver sensitivity and best in class robustness to interferers
- Power Supply
- Wide supply voltage range (2.0V - 3.6V)
- Low current consumption (RX: 27 mA, TX: 27 mA) and fast transition times.
- External System
- Very few external components
- RoHS compliant 7×7mm QLP48 package
- Peripherals and Supporting Functions
- Port expander with 4 general I/O pins, two with increased sink/source capability
- Battery monitor and temperature sensor
- 7-12 bits ADC with two channels
- Robust power-on-reset and brownout-reset circuitry
- Tools and Development
- Packet sniffer PC software
- Reference designs
- Applications
- ZigBee™ systems
- Home/Building automation
- Industrial control and monitoring
- Low power wireless sensor networks
- Set-top boxes and remote controls
- Automated Meter Reading
The CC2480 (formerly known as CCZACC06) is a cost-effective, low power, Z-Accel ZigBee Processor that provides full ZigBee functionality with a minimal development effort.
Z-Accel is a solution where TI's ZigBee stack, Z-Stack, runs on a ZigBee Processor and the application runs on an external microcontroller. The CC2480 handles all the timing critical and processing intensive ZigBee protocol tasks, and leaves the resources of the application microcontroller free to handle the application.
Z-Accel makes it easy to add ZigBee to new or existing products at the same time as it provides great flexibility in choice of microcontroller.
CC2480 interfaces any microcontroller through an SPI or UART interface. There is no need to learn a new microcontroller or new tools. CC2480 can for example be combined with an MSP430.
CC2480 supports TI's SimpleAPI. SimpleAPI has only 10 API calls to learn, which drastically simplifies the development of ZigBee applications.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | CC2480 Data Sheet datasheet (Rev. A) | 2008年 4月 4日 | |
* | Errata | CC2480 Errata Note (Rev. B) | 2008年 4月 7日 | |
* | Radiation & reliability report | CC2480 Reliability Report (Rev. A) | 2008年 4月 4日 | |
Application note | 2.4-GHz Inverted F Antenna (Rev. D) | 2019年 1月 7日 | ||
Application note | AN058 -- Antenna Selection Guide (Rev. B) | 2010年 10月 6日 | ||
Application note | AN040 - Folded dipole antenna for CC2400, CC2420, CC2430/31 and CC2480 (Rev. D) | 2008年 4月 4日 | ||
Application note | AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D) | 2008年 4月 4日 | ||
Certificate | CC2480 RoHS Confirmation (Rev. A) | 2008年 4月 4日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)
支援產品和硬體
此設計資源支援此類別中多數產品。
檢查產品詳細資料頁面以確認支援。
-
parametric-filter MSP430 微控制器 -
parametric-filter C2000 即時微控制器 -
parametric-filter Arm 式微控制器 -
parametric-filter 數位訊號處理器 (DSP) -
parametric-filter Arm 式處理器 -
parametric-filter 訊號調節器 -
parametric-filter mmWave 雷達感測器 -
parametric-filter Zigbee 產品 -
parametric-filter Wi-Fi 產品 -
parametric-filter Thread 產品 -
parametric-filter 其它無線技術 -
parametric-filter Sub-1 GHz 產品 -
parametric-filter 多協定產品 -
parametric-filter 藍牙產品 -
parametric-filter 數位電源隔離式控制器
封裝 | 引腳 | 下載 |
---|---|---|
VQFNP (RTC) | 48 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點