首頁 無線連線 其它無線產品
首頁
無線連線
其它無線產品

CC2510F8

現行

2.4 GHz 無線電收發器、8051 MCU 和 8 kB 快閃記憶體

立即訂購
產品規格表

CC2510F8

現行
產品規格表 立即訂購

產品詳細資料

Frequency range 2400-2483.5 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -40 to 85 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
Frequency range 2400-2483.5 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -40 to 85 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
VQFN (RHH) 36 36 mm² (6 mm × 6 mm)
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
filter 尋找其它 其它無線產品
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 34
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 Low-Power SoC (System-on-Chip) with MCU, memory, 2.4 GHz RF Transceiver, and USB datasheet (Rev. G) 2013/3/7
* 勘誤表 CC2510Fx, CC2511Fx Silicon Errata (Rev. D) 2015/8/14
應用說明 DN035 -- Antenna Quick Guide (Rev. B) 2022/2/9
應用說明 DN507 -- FEC Decoding 2019/3/21
應用說明 2.4-GHz Inverted F Antenna (Rev. D) 2019/1/7
應用說明 CRC Implementation (Rev. E) PDF | HTML 2018/9/27
應用說明 Using AES Encryption in CC111xFx and CC251xFx (Rev. C) 2015/3/13
應用說明 DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A) 2012/3/21
應用說明 AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A) 2011/9/8
應用說明 AN099 - Wireless Microphone with USB Interface 2011/6/1
應用說明 DN034 -- YAGI 2.4 GHz PCB Antenna 2010/10/14
應用說明 AN058 -- Antenna Selection Guide (Rev. B) 2010/10/6
應用說明 AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A) 2010/9/30
應用說明 DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 2010/8/26
應用說明 AN064 -- Two Way Audio Communications Using the CC2510 (Rev. B) 2010/6/30
應用說明 DN505 -- RSSI interpretation and timing (Rev. D) 2010/6/16
應用說明 DN107 -- DMA and Radio Configuration (Rev. A) 2009/12/17
應用說明 DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target Board 2009/12/1
應用說明 DN117 -- SimpliciTI-compatible UART Driver 2009/9/22
應用說明 AN080 -- LED Lighting with Remote Control using CC2510 and CC1110 2009/9/16
應用說明 DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B) 2009/8/11
應用說明 DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A) 2009/8/11
應用說明 DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices 2009/8/3
應用說明 DN115 -- Using PWM for Dimmer Function in LED Lighting 2009/6/16
應用說明 DN111 - Current Consumption for a Polling Receiver (Rev. A) 2009/3/24
應用說明 AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D) 2008/4/4
應用說明 DN021 - CC2500 and CC2510 Sensitivity versus Frequency Offset and Crystal Accura 2008/3/10
應用說明 AN048 -- 2.4GHz Chip Antenna (Rev. B) 2008/3/4
應用說明 DN101 -- Using the ADC to Measure Supply Voltage (Rev. A) 2007/10/22
應用說明 DN102 -- SoC Temperature Sensor (Rev. A) 2007/10/22
應用說明 DN504 -- FEC Implementation (Rev. A) 2007/10/22
使用指南 CC1110/CC2430/CC2510 Debug and programming Interface Specifications 2007/5/3
應用說明 DN004 Folded Dipole Antenna for CCC25xx 2006/12/5
更多文件說明 CC2510 RoHS Confirmation 2006/1/31

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

程式碼範例或展示

SWRC085 — CC1110/CC2510 Example Software Supported on IAR Embedded Workbench

支援產品和硬體
程式碼範例或展示

SWRC117 — CC1110, CC2510 Basic Software Examples

支援產品和硬體
驅動程式或資料庫

SIMPLICITI — 符合 SimpliciTI 的協定堆疊

SimpliciTI is a simple low-power RF network protocol aimed at small RF networks. SimpliciTI was designed for easy implementation and deployment out-of-the-box on several TI RF platforms such as the MSP430 family of low-power MCUs and the CC1XXX/CC25XX/CC430 transceivers and SoCs.

Small RF networks (...)
支援產品和硬體
支援軟體

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

支援產品和硬體
計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置：

 

資源

支援產品和硬體
設計工具

SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 裝置的硬體設計審核

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。一個簡單的三步驟流程用於請求審查，以及相關技術文件和資源的連結，可在此處找到。

入門指南

一般設計問題應張貼在我們的 E2E 討論區中，然後才能要求 2.4 GHz 硬體設計審查。

請確實備妥下列必要文件，隨硬體設計審查申請表一起傳送：

  • 確認產品頁上提供的所有硬體文件均已經過審查，例如產品規格表、設計指南、使用指南和其他硬體資源
  • 電路圖的可攜式文件格式 (PDF) 版本可供檢閱
  • 物料清單 (BOM) 可供檢閱
  • 堆疊詳細資料可供檢閱
  • 電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)
支援產品和硬體
參考設計

CC2510EM_REFDES — CC2510EM 參考設計

CC2510EM 參考設計包含 CC2510-CC2511DK 開發套件中使用的 CC2510EM 評估模組的原理圖和佈線圖檔案。

該參考設計展示了用於 CC2510 去耦和射頻配置的精湛技術。為了實現最佳射頻性能，應該精確複製這些零件。此為雙層參考設計，配備分立式平衡不平衡轉換器與專為單端 50 歐姆天線設計的 SMA 天線連接器。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHH) 36 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片