支援軟體
LOAD-SWITCH-FET-LOSS-CALC — Power Loss Calculation Tool for Load Switch
Quickly trade off size, cost and performance to select the optimal MOSFET based on application conditions.
現在提供此產品的更新版本
引腳對引腳且具備與所比較裝置相同的功能
CSD17501Q5A
- Ultralow Qg and Qgd
- Low Thermal Resistance
- Avalanche Rated
- Pb Free Terminal Plating
- RoHS Compliant
- Halogen Free
- SON 5-mm × 6-mm Plastic Package
- APPLICATIONS
- Point-of-Load Synchronous Buck in Networking, Telecom,
and Computing Systems - Optimized for Synchronous FET Applications
- Point-of-Load Synchronous Buck in Networking, Telecom,
The NexFET power MOSFET has been designed to minimize losses in power conversion applications.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DLPDLCR4710EVM-G2 — Full HD DLP4710 晶片組評估模組
DLP® LightCrafter Display 4710 EVM-G2 是易於使用、隨插即用的評估平台，適用於 Full HD DLP4710 晶片組。DLP4710 晶片組專為各種顯示應用所設計，例如行動投影機、無螢幕電視、互動式顯示器和數位看板。DLP4710 晶片組由 DLP4710 (.47 1080p) Full HD DMD、DLPC3439 顯示控制器和 DLPA3005 PMIC/LED 驅動器。這款尺寸小巧的 EVM 配備可立即生產的光學引擎，並提供解析度 (Full HD)、亮度和可編程性的強大組合。
DLPDLCR4710EVM-G2 (...)
DLPDLCR4710EVM-G2 (...)
使用指南: PDF
開發板
TPS23754EVM-420 — 適用於 TPS23754 的 20-57V Vin、5V Vout 高功率評估模組
TPS23754EVM-420 contains evaluation and reference circuitry for the TPS23754, which is a Class 4 (25.5 W) PoE PD + PWM Controller. The TPS23754 is targeted at wide Vin aplications (24 V - 60 V) in isolated converter topologies and is compliant with the IEEE 802.3at Power over Ethernet (PoE) (...)
使用指南: PDF
開發板
TPS2412EVM — TPS2412 評估模組
The TPS2412EVM is an evaluation module set up to wire-OR two power supplies for redundant power to a load using two TPS2412s and MOSFETs.
使用指南: PDF
支援軟體
NONSYNC-BOOST-FET-LOSS-CALC — NONSYNC BOOST FET LOSS Calculator
MOSFET power loss calculator for non-synchronous boost converter
支援產品和硬體
計算工具
FET-SOA-CALC-SELECT — MOSFET SOA calculation and selection tool
Excel based FET SOA calculation and selection tool
支援產品和硬體
計算工具
MOTOR-DRIVE-FET-LOSS-CALC — Power Loss Calculation Tool for BLDC Motor Drive
This is an Excel-based MOSFET power loss calculator for brushless DC motor drive applications.
支援產品和硬體
計算工具
SLPR053 — Power Loss Calculation Tool for Synchronous Inverting Buck Boost Converter
MOSFET power loss calculation and selection tool for synchronous inverting buck boost converter
支援產品和硬體
計算工具
SYNC-BOOST-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Boost Converter
MOSFET power loss calculator for synchronous boost converter applications.
支援產品和硬體
計算工具
SYNC-BUCK-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Buck Converter
Quickly trade off size, cost and performance to select the optimal MOSFET based on application conditions.
支援產品和硬體
參考設計
PMP10288 — 4 級 PoE 高效率主動鉗位順向式轉換器 (3.3V) 參考設計
The PMP10288 reference design is a Power Over Ethernet (POE) active clamp forward converter. It features the TPS23754, which is a combination of a POE Powered Device (PD) controller and PWM controller. CSD17501Q5A FETs are used for high efficiency synchronous rectification. The input accepts (...)
參考設計
TIDA-01226 — 採用 DLP Pico 技術的精巧型 Full HD 1080p (高達 16 安培) 投影顯示參考設計
這款參考設計配備 DLP Pico™ 0.47 吋 TRP Full-HD 1080p 顯示晶片組，並在 DLP LightCrafter Display 4710 G2 評估模組 (EVM) 中實作，可讓 Full-HD 解析度用於投影顯示應用，例如配件投影機、無螢幕顯示器、互動式顯示器、穿戴式裝置（包括頭戴式顯示器）、看板、工業和醫療顯示器。此設計採用的晶片組包括 DLP4710 (.47 1080p) DMD、DLPC3439 顯示控制器及 DLPA3005 PMIC/LED 驅動器。
參考設計
TIDA-00122 — 車用 200VA 高頻逆變器設計
This design presents a low-cost, small size, robust 200-VA DC to AC inverter based on TI’s MSP430 and UCD8220-digitally managed push-pull controller. It is targetted towards car inverters and small-segment inverters for commercial applications. In this design, UCD8220 is used for a boost (...)
參考設計
PMP9126 — 36 至 75VDC 輸入 5V/15A 主動鉗位順向式 1/8 磚型參考設計
This reference design generates a 5V/15A output from a 36V to 75V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD17501Q5A and CSD18502Q5B, implemented as a synchronous rectifiers, provides for a highly efficient (...)
參考設計
PMP8790 — 主動鉗位順向四分之一磚型封裝 (18 至 60V DC 輸入 3.3V/12A) 參考設計
This reference design generates a 3.3V/12A output from a wide 18V-60V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD17501Q5A and CSD18502Q5B, implemented as self-driven synchronous rectifiers, provide for an (...)
Test report: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSONP (DQJ) | 8 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。